Satellite P100-188 - cannot use the LAN driver listed on the download page

Similar Questions

• Satellite P100-188 starts after the upgrade of the wireless network card

  I recenty installed a new Intel 5100 Series 512AN_MWW Mini PCI NIC in my Satellite P100 - 188 PSPA3E database.
  However, when it is installed, he refused to view and start.

  I'm sure (read the technical info) that these cards use the same interface.
  So why it won't work?
  Is an update of the BIOS to enable a feature. If so, could someone kludge one together please?

  I have the latest version of the BIOS installed 4.70 and am running Windows Vista.
  I am desperate for this that I already have a project N AP 2.0 and want to use it to its full capabilities.

  Cheers, Rob

  Hello

  If I understand your message you have improved the Interior card WLan Intel (Golan) Intel 3945ABG 802. 11a / g to Intel 5100 with project support.

  Boyfriend although it seems that you can't use the WLan draft N card in this laptop model.
  Seems such card is not compatible and cause interference.

  As I know the Draft N need of 3-wire antenna the antenna Satellite P100-188 supports 2 wires only and can be used with the 802.11 A, B or G standard.

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again

• Satellite P10 804: cannot use the day before and the FN keys / hibernation

  Satellite P10-804. I had a virus and this has been supported by a professional. Since I can't use my Fn key and therefore cannot standby / hibernate etc. The sleep function does not work also if I use the "standby" button mode start Microsoft.

  The system just trying to go to sleep and restarts again, sometimes doing, it resets the date and time of the computer. Any help would be greatly appreciated. Thank you.

  Hello

  May I ask why you n t use the recovery CD Toshiba to restore the operating system on the P10 Sat?
  Simply boot from the restore CD from Toshiba that came with the laptop. This CD contains the Windows operating system with all the drivers and tools pre-installed.

  The installation process takes about 10 minutes. It of very simple but please note that this new facility will format the HARD drive.

  Other questions?

• Satellite P100-347 - cannot install the new VAP

  When you use the Flash cards they still "spoil" i.e. blurring and basically they are unusauable. I went on the site of toshiba and downloaded the latest package of added value.

  However, when I run the Setup it says its already installed and I should remove in Add/Remove Programs (Control Panel). However, it is nowhere to be seen in the list and ive also studied on ccleaner and advanced unistaller pro. There is no way that I can remove the old... so I can't install a new!

  Any ideas?

  Info...
  Date 2009-02-21 22:30:45

  [Information on PC]
  Model name Satellite P105
  Part number PSPA6U-03D019
  Serial number X6093498W
  Version of the operating system Microsoft Windows Vista Home Premium 6.0.6001 Service Pack 1
  Version of the BIOS V4.50
  Processor Intel (r) Core (TM) 2 CPU T7200 @ 2.00 GHz
  Physical memory 2048 MB RAM
  Disk capacity hard 200,811,003,904 [bytes] 187.020 [GB]
  Capacity of the hard drive space free 112,906,539,008 [bytes] 105.152 [GB]
  Video NVIDIA GeForce Go 7900 GS version = 7.15.11.5666
  Screen resolution 1440 x 900 Pixels
  Color quality, true color (32 bit)
  Sound version of Conexant High Definition Audio = 3.18.0.51
  Version of Intel (r) PRO/1000 PL Network Connection Network = 9.11.5.7 = 00:16:36:95:6 B MAC address: 99
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 12.2.0.11 address MAC = 00:18: OF: A8:74:BF
  Modem HDAUDIO Soft Data Fax Modem with SmartCP version = 7.35.0.0
  Internet Explorer 8.0.6001.18372
  IDE Device FUJITSU MHV2200BT PL ATA Device
  FW version device ATA HL-DT-ST DVDRAM GMA-4082N PT06 of =

  Any ideas, I would be grateful! Thank you!

  Hello!

  That s nice and thanks for the comments.

  Good bye

• Satellite P100-429 - cannot install the display drivers for Win XP SP3

  Hello

  I have Toshiba p100 429 portable, installed with win xp professional sp3. I am unable to change the screen resolution of 640 by 480.

  In fact, I tried to download the toshiba site display driver but after installing the driver, it gives a blue screen with error error NV4_mini.sys.

  After that I can't yet run my laptop.
  I currently use the external monitor (master B2230 synchronization). I also tried to download the drivers from the Nvidia site, but that does not work either.
  Low resolution on my screen. Thanks for your help

  Have you tried to install THIS driver?

• Satellite L855 - 13G - cannot use the Webclaim service

  Hello

  I bought a Toshiba Satellite L855 - 13G (PSKACE-04Y00CFR) in France last year, but this computer is already leading me in trouble!

  The graphics makes noise, one of the USB port does not work, and now, without any change of software, the computer shuts off after displaying a blue screen with "KERNEL_DATA_INPAGE_ERROR".
  This blue screen just randomly (say about two or three times a day).

  I would send this computer for repair, but now I find something very weird: Toshiba has done everything possible to hide L855 - 13G!

  All first of all without result on the Web site:
  https://www.Google.co.UK/#q=%22l855+13g%22+site:Toshiba.com

  Second, the model is not listed in the support Center:
  https://www.Toshiba.fr/innovation/generic/SUPPORT_PORTAL/
  When I enter the serial number: no result. Also using the fields ' or is your product "model is not listed.

  Third, and better, I can't access the service of warranty claim for a Toshiba product for this computer: when I'm on https://weblord.toshiba-tro.de/Webclaim/ and I fill the serial number, the computer is identified (Alleluia), I have a green check mark for the status of the guarantee and "your product is still in warranty period."

  But then, I can't click next and mention "product not available: Unfortunately your product is currently not available" appears instead.

  So... apparently Toshiba is is best to forget about the Toshiba Satellite L855 - 13 G, but for unlucky enough to have people buy a what are the next steps?

  I would like to be contacted by someone from Toshiba to get an answer or a proposal to change my computer or at least fix it!

  Many thanks in advance,
  Best regards.

  > I would like to be contacted by someone from Toshiba to get an answer or a proposal to change my computer or at least fix it!

  First of all, I want to provide you with information on this community.
  This is a user to user community where you meant fans of Toshiba. You won't find any Toshiba here people

  Now some details about the fix for laptop:
  In case your laptop computer s hardware began to malfunction, you can contact the maintainer authorized Toshiba in your country in order to fix hardware problems.
  Here on this page of Toshiba ASP you can find all available worldwide FSA:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  Last but not least, he should know that the warranty only covers hardware problems.
  If in case the laptop does not work due to some software problem, the warranty would not cover the cost. This is why I would recommend you to retrieve the computer laptop back to factory BEFORE you contact the ASP.

  I hope this info helps a bit.

• Satellite L650-1FU - cannot install the new page ATI ATI driver

  Hi all

  Everytime I try to download and install the latest driver for my L650 ATI he says he does not support! I can only install one that is available on the website of Drivers from Toshiba. However, he's old enough!

  Can you give me a hand?

  It is correct.
  As far as I know the reason is the following:
  The ATI card that nVidia drivers are not changed and not designed for mobile use.
  The point is that the use of these drivers, the GPU would go better performance and this would lead to higher levels of temperature.
  This can affect the GPU and in the worst case sound leads to damage GPU.

  As far as I know Toshiba use clean, updated drivers as well as some other notebook manufacturers.

  However, in case you want to install this driver, you have to through the Device Manager.
  You can use the "Advanced" installation procedure which allows to point to the driver folder that contains the files from ATI.

  But the use of these drivers is at your own risk

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Satellite A200 PSAF0A - cannot use the DVD writer / reader more

  Hello
  Anyone has any advice on this?

  Laptop: Satellite A200, PSAF0A
  Require: DVD burner / player sofware.

  My hard drive died last week, so a techno guy installed a new and reinstalled the OS (Vista)... everything works fine. But don't have Toshiba Utilities for the use of the DVD burner / player more. Where is it? I downloaded the player to DVD from Toshiba, but it does not work. It doesn't do anything. Media player plays sound but no video.

  The software that I used to play DVDs accompanying the package when I bought it; InterVideo WinDVD I remember well.
  I downloadeded V 8, but it does not work either. I need Codecs etc, right?

  Looked at Toshiba Europe site for the DVD player, but I think it's the same DVD s/w that I have already downloaded.
  But there is no download of my model, PSAF0A (Satellite A200) in all cases.

  I do not have the CD - they are comfortable in another country! (Unless, of course, my nephew is using them as a frisbee that could well be the case). Help!

  It seems that Toshiba do not publish the DVD software on the site... maybe its due to the issues of the region / license?

  Try AVS DVD Player (its free).
  If you need a MPEG2 codec, install ffdshow

  The two are in http://www.free-codecs.com

• Satellite C660-155 - cannot use the FN keys

  I have a Toshiba satellite c660-155 PSCOQE, I just reinstall windows 7 on a generic drive and I lost the feature of function keys (fn) (I can no longer hold the fn key and press a button to change the brightness ect) I need to install to get it?

  You must install the Support TOSHIBA Flash Cards and then Toshiba value added package utility.

  By the way: If you want to use clean OS installation you need to install many other drivers, tools and utilities that must be installed on the right the order of installation.
  If you need help with it let us know.

• Satellite U500-1FN - cannot use the scroll function

  Hello

  I bought the Satellite U500-1FN and after a format I have a problem with the touchpad. All the works expect to scroll.

  I downloaded the drivers from the Toshiba site, but nothing. I'm doing everything I check enable scrolling and everything.

  Any ideas?

  Hello

  What version of Windows you have installed now and which the touchpad driver you installed exactly?

  Satellite U500, you install the Synaptics Touchpad and Alps. You have installed both?

• Satellite A300-1EG - cannot use the command buttons (play, stop) Win XP

  Hello.

  I have a problem with my Toshiba A300-1EG with good software Toshiba Control Center for Win XP, because I do not know how to import a brightened sense Key (PLAY, STOP, FORWARD, BACK).

  Toshiba offers a poor software on own site.
  I can change only 2 buttons (SOUND ON / OFF and ON AUDIO PLAYER).

  Help!
  PS. Sorry for my English

  Hello

  The play, pause, stop buttons and following can not be changed!
  You can use it with Windows Media Player or WinAmp (if you enable the option in Winamp).

  See you soon

• Satellite L505-13j - cannot use the FN keys after 5-10 minutes

  Hello

  I have problems with my "FN" key

  When I restart my system, everythings went well with it, but when I used about 5-10 min of my computer, I can't use FN more.
  I don't know why.

  Can someone help me?

  Hi mauysz,

  I put also t know why this happens, but you can try to reinstall Toshiba Value added Package if you have Vista or Windows 7 is installed. FN keys will be controlled by this tool and the Flash Cards Support utility. Everything you can download here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But remove the old tools first. Restart the computer, and then install VAP, then Flash Cards Support utility.

• Satellite L100-179 - cannot use the full amount of RAM

  Hello

  I have the laptop above and for some time have been under Windows XP with the RAM, he came with, I have now bought 2 sticks of 1 GB, after checking the max RAM allowed, the problem is that when I install Windows reports that 896 MB of RAM installed.

  Latest version of the BIOS is installed and I changed the setting MAXMEM in Windows, but still no go. These two circuits are fully operational (installed on another laptop and the right amount is shown), my question is how do repair this laptop to recognize the full amount of RAM I have installed.

  Concerning

  Hey Buddy,

  It is difficult to say something... What new bought exactly RAM modules?
  I mean, theoretically, that they are not compatible

  How much RAM will appear in the BIOS?
  Perhaps of missing memory capacity is reserved for the graphics card and internal devices.