wireless broadband adapter repeatedly no longer works and disappears

Similar Questions

• DVD drive no longer works and disappears from MS explore

  New "TSSTcorp CDDVDW SH-S223C ATA Device" Samsung dvd player is visible in Windows Explorer after starting the machine.  He can see an audio CD.  However, when a DVD is inserted it reads very slowly, then stops and the drive is no longer visible in Windows Explorer.

  I updated the firmware with a utility Samsung called Firmware Samsung ODD liveupdate, but this made no difference.

  Hello

  For a new disk that should really be fixed/replaced under warranty.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  --------------------------------------------------------------------------------------------------------

  You can try these but it seems that the drive has a hardware problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Reference Dell wireless wlan network contoller care stopped working and was closed

  When I sign on my computer a pop box message titled: "dell wireless wlan network contoller care stopped working and was closed" and said "a problem caused the application to stop working correctly. Windows will notify you if a solution is available. "whenever I close the dialog box, it reappears in 10 seconds, say the same thing. i've tried looking for updates and correct the problem, but so far nothing is working even my wireless (of course). I don't remember the updates or installations on the eve of what is going on has begun. I had a few downloads, but those who were on a week or two ago and I have had similar to those downloads of before and it did not.  they the day before I started getting this message didn't notice or do something out of the ordinary on my computer. Help! Please and thank you.
  Oh and I get another message when I first turn on your computer but unlike the other reappear... and says something about an error with C:/Windows/System32/onex.dll and asked me to open it, but windows can not open it and I do not know what program to open it with and by using the internet option no longer works.

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to set the computer to a normal startup.

  Method 2: I would say as update you the WLAN driver and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Run the hardware and devices Troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default

  My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default browser and it would not allow me to change back. I realized that I had something that I had not needed so I tried to remove it. It took a morning full of accomplish this chore. I went back to Firefox and found that my tabs were there, but they were opaque and would not work. In fact, you could read what was beneath them. No way to get anything wthout return to the start page of Firefox. I uninstalled Firefox and put it back on and it was always the same thing with the non operation of the opaque tabs. Troops you have good ideas as to how I can get my Firefox working again?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• FS2004: When I'm at the airport of CYYZ and while that video card no longer works and it gets.

  OK, here's what happens to me at the moment and it makes me already started.

  When I play Flight Simulator 2004 and when I'm at CYYZ or other airports, such as landing or taxiing at the airport like a few minutes, whenever my video no longer works and it retrieves.

  Here is what I did to solve the problem but no results

  • Reinstalled FS2004
  • I have no Add on secernys or something else
  • Tried to lower the settings to min.
  • Updated the FS2004 to 9.1
  Here are my PC specs
  Dell Inpirson 530
  Windows 7 32-bit home
  2.40 GHz Intel Core 2 Duo
  254 MB video, ATI Radeon 2400 or 2600 XT HD (not sure)
  3 GB RAM
  Y at - it something I can fix this, I really hope that if I can fly again.

  Hello Vansers,

  1 have you tried the steps proposed in the above items to solve this problem?

  The link given in the lower part is to bind to the Flight Simulator community to post your question there. The link worked when I tried to open. However, I post the link once more. Here is the link:

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.simulators&mid=2b49ddf8-e33d-4a09-8427-89e003df2878

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• MyFinePix Studio no longer works and try to uninstall it says that ytuploader.dll is still in use

  problem deleting YTUploader.dll

  Someone has a problem with Fujifilm MyFinePix Studio where the process of update no longer works and advise to reinstall the software? If the software is uninstalled it cannot be completely removed because the file "YTUploader.dll" is still used by a program. All attempts to remove this file and the Fujifilm folder that contains the Program Files directory failed.

  Someone has any advice on how to get rid of this file?

  The general opinion of MyFinePix Studio is that he wrote very well and better to avoid, so I now use another Photo management Package.

  Hi RobertKenyon,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• host process no longer works and removes my default printer

  Host process no longer works and removes my default printer.  I need to reinstall my printer software for vista down a few hours later.

  Hello

  -First check with the printer manufacturer for updated drivers and problems as well as their forums (if any).

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  If this did not help.

  I would REBOOT and when the computer stabilizes after a few minutes, and then remove the printer.

  Then REBOOT again and go through this troubleshooting and only after he re - install the
  printer. Be sure to install the latest drivers.

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  ===============================================================

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• I tried to use my photoshop cs program after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it summer more then 30 days so that program do

  I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• My Flash Player no longer works and I have to download several that he twice daily. What's wrong?

  My Flash Player no longer works and I have to re - download many that he twice daily. What's wrong?

  I checked to see if it is on and it is always. I deleted temporary files. When I try to download it, I always get a message that I do not have enough privileges to complete the download. Then when I check, it still works very well!

  If you are in a corporate environment where you don't have administrator rights on the machine, you should have a chat with your friendly neighborhood computer guy; However, I'm guessing that this is not the case.

  If it's your home machine and you are an administrator, this is a good indication that the file system is damaged.  It is not really good news, I'm sorry.

  Let's start first of all, if you have something important on the machine, now is a great time to save somewhere.  Removable disk, web storage, no matter.  When the file system starts to get wobbly, he could simply be badly timed power outage or something, or it could be a first indication that your hard drive is going to bite the dust soon.  Having lost my fair share of readers, I recommend you to take the warning as a gift and make a backup.  Of this is way less painful than the alternative.

  Once your valuables are secure, and your seat is in position, locked and trained, will search for and fix something wrong with the file system.

  Check your hard disk for errors - Windows 7:

  https://support.Microsoft.com/en-us/KB/2641432

  At this point, take the nuclear option and manually purge every bit of Flash Player in the system.

  (Note: these instructions are for Win7 and lower grades.)  "If you're in Win8 or later, we'll talk more before doing anything.)

  Perform a new installation of Flash Player on Windows:

  https://forums.Adobe.com/thread/928315

  My guess is that you will get to a stage that you can't achieve because you do not have the permissions to do so, even if you * have permission.

  If it's deleting a file, usually a utility like Unlocker will repair it for you, at which point, you can delete the file and complete uninstallation.  It was probably the damaged file.  If you couldn't clean it as admin, our installers have not been able to touch either.

  Unlocker - download reviews and free software - CNET Download.com

  If it is a registry key, you have bigger problems.  There are commercial third-party utilities that are supposed to do magic registry fixes, but Windows includes its own audit of the registry and repair tool which is already not fixing the issue.  I'll leave to you to experiment with those if you want, or if you just want to do a complete reinstallation of the operating system and applications.  Whatever it is, something's wrong with the underlying operating system.  Personally, I tend to be skeptical about the utility of spare parts, and if it has been a few years, you will probably be surprised to see how fast the machine after doing a fresh install of the OS.

  Hope that helps.

• Hi I was told to come to the support with the error number 16... for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi, I got to come to the support with the error number 16. for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi Omid,

  Please see the below help document to fix the error 16:

  Configuration error 16. CC, CS

  If the problem persists, please contact support:

  Contact the customer service

  Kind regards

  Sheena

• I design premium cs3 on my old laptop is no longer works and want to put it on my desktop pc

  I design premium cs3 on my old laptop which is no longer work and you want to put on my desktop how can I do this without buying it again once I have on my previous products of the page with the serial key

  If you have any records, you can use them to reinstall.  Otherwise, you can download the demo version of the software by means of the linked page below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• Place of Dell 8 pro and Microsoft Wireless display adapter is no longer reflects the views.

  To the right,.

  I have a Dell 8 pro place and a Microsoft Wireless display adapter. The adapter works perfectly and I can mirror the views. Then reset my place of Dell 8 pro and reconnected and now he wants to extend only. I even tried to reset the graphics card but without success.

  How can I mirror back on my place of dell 8 pro and Microsoft Wireless display adapter?

  Bobby Burgess

  I worked on this issue for hours.  And the answer is: there is an update to one of the drivers DV8P, the driver of the Intel platform, bringing the clone feature.  Available through Dell for the DV8P and the direct link below product support page.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=3VR67&

  Hours, I tell you.

• Firefox 33.1 constantly no longer works and indicates "Not responding."

  Firefox no longer works (hang up) and reports program is "Not responding" frequently - sometimes every few minutes. Audit memory shows that this is not a problem. I don't want to reset Firefox to factory settings and lose the customization. This problem has worsened since version 31. I think it happens more often when I use Dragon NaturallySpeaking while on the Internet, but I can't prove it. Would that the comments of others who have had the same experience. Now, using version 31.1.1.

  It was very good work. Play well.
  Please mark your last post as solved so other will know.

• Shortcut keyboard 'Mark as unread' in the Mail no longer works and performs a completely different action instead.

  Hi guys,.

  I get a lot of spam and incongruous emails, most of which don't deserve to be read. I ususally just select all and press "cmd + shift + U" to mark all read or not read. Suddenly, I noticed that this shortcut no longer works for me and even though it is a very minor problem, it is kind of annoying and I'd love to fix it.

  Basically, when I press "cmd + shift + u" now, he is not mark as read – instead it brings up a finder window with the option "open" files (the same window that appears when you click the paper clip in a new email to browse attachments), and I have no idea why!

  In Mail the shortcut should be the same, it is said it is the same shortcut in the drop-down menu, and I have not changed anything. I don't know what the finder window that appears is for, if I actually use it to open a file and then disappears from the window but nothing of actually opens or is happening. What's weird, is that when you use the shortcut to "mark as unread" and the finder window appears, it actually becomes the selected window - mail is still selected. And, therefore, this means that if you continue to press the shortcut to "mark as unread", it will be permanently open these "File Explorer" finder windows... which I've never seen elsewhere.

  Anyone who has a solution?

  

  So much worse... After weeks of being confused, that just now, I realize what the problem was.

  I installed the Puush application to quickly download screen shots and files... and guess what it was shortened by default for the "upload file"...

  Problem solved.