Satellite P100-347 cannot find devices with Bluetooth

Similar Questions

• Satellite P100-437: cannot find modem and drivers for sound card for XP

  I can not find modem and audio drivers for windows XP. Help, please.
  Thanx

  Hello

  Satellite P100 - 437 (PSPAGE) shipped with Vista. Am I wrong?
  I think this is a reason why this series is not listed on the page of the Toshiba driver at the moment.

  Have you tested the drivers from another P100 series? Some devices come with the same material specifications and possibly other drivers will run.

  Maybe an additional info about the card and the modem will help you;
  It s a good Conexant chip and modem Conexant. Therefore you must find the Conexant audio drivers and driver Conexant modem software in the net.

• Satellite P100-347 - cannot install the new VAP

  When you use the Flash cards they still "spoil" i.e. blurring and basically they are unusauable. I went on the site of toshiba and downloaded the latest package of added value.

  However, when I run the Setup it says its already installed and I should remove in Add/Remove Programs (Control Panel). However, it is nowhere to be seen in the list and ive also studied on ccleaner and advanced unistaller pro. There is no way that I can remove the old... so I can't install a new!

  Any ideas?

  Info...
  Date 2009-02-21 22:30:45

  [Information on PC]
  Model name Satellite P105
  Part number PSPA6U-03D019
  Serial number X6093498W
  Version of the operating system Microsoft Windows Vista Home Premium 6.0.6001 Service Pack 1
  Version of the BIOS V4.50
  Processor Intel (r) Core (TM) 2 CPU T7200 @ 2.00 GHz
  Physical memory 2048 MB RAM
  Disk capacity hard 200,811,003,904 [bytes] 187.020 [GB]
  Capacity of the hard drive space free 112,906,539,008 [bytes] 105.152 [GB]
  Video NVIDIA GeForce Go 7900 GS version = 7.15.11.5666
  Screen resolution 1440 x 900 Pixels
  Color quality, true color (32 bit)
  Sound version of Conexant High Definition Audio = 3.18.0.51
  Version of Intel (r) PRO/1000 PL Network Connection Network = 9.11.5.7 = 00:16:36:95:6 B MAC address: 99
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 12.2.0.11 address MAC = 00:18: OF: A8:74:BF
  Modem HDAUDIO Soft Data Fax Modem with SmartCP version = 7.35.0.0
  Internet Explorer 8.0.6001.18372
  IDE Device FUJITSU MHV2200BT PL ATA Device
  FW version device ATA HL-DT-ST DVDRAM GMA-4082N PT06 of =

  Any ideas, I would be grateful! Thank you!

  Hello!

  That s nice and thanks for the comments.

  Good bye

• How to find the exact motherboard for Satellite P100-347 model?

  Hello
  I hope someone could help me. I'm looking for a new motherboard for my computer toshiba laptop because it replaced needs.

  I own a laptop Satellite P100-347 of pspa6e-03302cen and have not been able to find this anywhere online forum. Although I found two suppliers of many motherboards of p100, they use numbers of alternative model in which I can't find anywhere in my documents or on the computer. The model numbers they use are something like A000008350 or a number starting with k. I'm sure that the supplier I found has the motherboard, I would need but I would need a list of all the numbers of the other party for my laptop, or a way to find the exact numbers. Any help on this is appreciated...
  Thank you

  To be honest I really don't think that someone here can offer you this info. As you know, this info is for internal use and you can try to get this info from service provider authorized in your country. Sorry, but I don't see a better solution, except to wait here and hope someone can help.

  Good luck!

• Satellite P100-347 - problem with the judgment during the game

  I have a problem with my (pspa6e) Satellite P100-347

  After about 10 minutes of play time with games like battlefield 2, the SIMS2 and so on... my pc stops...
  I knew it was close because of high gpu or cpu temp...

  I felt that my laptop was warm, but after playing for a while its normal...

  So I installed HWmonitor to check my gpu, CPU and disk hard temp...

  That's what I show:

  THRM: 61.C - 141.F

  CPU: core0\1 - two 64.C - 147.F

  GPU: turn 85 stable - 90.C
  This normal use... no games...

  HARD DRIVE: 39.C

  Something must be wrong! GPU temp is too high?
  I tried a fresh install of the OS...

  Thnx for all the help and answers!

  Hmm these times can be a little high.

  Most likely there is dust in the radiator. You can use compressed air to remove it. Or as a miracle solution, blow into the vents dust closes in contrast to air circulation.

• Satellite P100-347 with Vista Premium in the United Kingdom

  I am looking to buy the Satellite P100-347, but I want to get with Vista Premium - no upgrade.
  Does anyone know when this machine will be available with Vista Premium in the United Kingdom.

  Thanks in advance

  Joel

  Hello Joel

  I heard that Toshiba will start notebook with Windows Vista at the end of January 2007. Perhaps the United Kingdom will be starts earlier (perhaps it is also a country, I put t know exactly).

  As you know Vista comes with several different versions, but it will be preinstalled on P100, no one can tell you with certainty.

• Cannot be accessed by Satellite P100-347 after the password of BIOS setting

  My friend has recently created a startup password using the numeric keypad and now I can't access my satellite P100-347 beyond startup even if am to enter the correct password!

  Is there anyway around this problem?

  Hello

  Bad sorry :(

  Unfortunately, you must contact the ASP in your country for this problem.
  Technicians have first remove this BIOS password.
  In addition, I think that to avoid this problem, the BIOS must be updated to version 2.40 or higher and also the Toshiba utility must be updated to version 1.8.14.2 or higher.

  Good luck

• Instant stopping and restarting on Satellite P100-347

  My satellite P100-347 maintains close instantly then restart. All the solutions because its still new and very expensive for a replacement.

  Hello

  It seems that your machine is overheating and then he made a stop for reasons of physical security.
  You said that it happened when you play NFS carbon, it is a good sign for a cpu/vga heat problem.

  I suggest you to clean your fan and your cooling system, because when it s clobbed with of the dust of the system cannot be properly cooled and it is stopped to avoid serious damage to your valuable equipment. Just be a can of compressed air and clean your cooling system (but gently, otherwise you may damage the fan who convey the air that is heated from cpu/vga)

  Just a question: what drivers are installed for your vga? You have the original toshiba display drivers? If this isn't the case, then the problem is self explaining because schedules of the original nvidia/ati drivers are not suitable for laptops.

  Welcome them

• On my Satellite P100-347 cooling fan runs all the time

  Hello

  I think I might have a problem with the fan on my Satellite P100-347. He seems to be constantly works constantly and is much stronger than when I bought the computer. Initially he just spent and if so, I think that this could now be wrong.
  Help, please.

  Hi Beata

  I agree with the suggestions of Sanremo; He s I don't known how old your laptop has but from time to time it of necessary to clean the cooling fans. Dust and debris inside the laptop could prevent the cooling modules work properly!
  The fresh air flow is also very important. Don't forget that there is enough free space around the laptop. Do not use the laptop on the lap or in the bed. In this case the laptop cannot be cooled in the right way and the high temperature can damage parts such as GPU to the Board of Directors.

  But if you think that there is a serious hardware problem you must contact the service provider authorized in your country.

  Good luck and greetings to Poland ;)

• Satellite P100-347 - nVidia drivers day?

  Can support Toshiba fix some vista updated drivers for:

  Satellite P100-347... (pspa6e)

  This should be up to date on Toshiba site, because the drivers on
  NVIDIA.com do not work on my Toshiba laptop...

  Thnx

  It is well known that manufacturers of graphics support pages downloaded drivers cannot be installed on laptops. Each laptop manufacturer must ensure that display driver works well on the specific cell phone model and will not force the graphics card to run on the highest level.

  I hope you understand why laptop manufacturers do this.

  In any case, you can just hope that your message will be read by the Toshiba support service. ;)

• DVD drive does not burn/erase RS - Satellite P100-347

  Hello

  I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

  However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

  The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

  Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

  JAS

  Hello

  As you probably know, readers don t support all kinds of media.
  I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
  I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
  They work best with my drive...

  But I'll give you a tip:
  You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

• Satellite P100-347: blue screen at startup - unable to boot volume

  Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.

  During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).

  I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.

  Can I do other than take it to a technician?

  Hello

  Well, for the most part the BSOD appears due to hardware problem or serious software.
  In your case, the software problem is possible

  Unfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
  Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD disk

  I think, now, you know that regular backups are important and necessary!

• Satellite P100-347: How can I replace key caps

  How and where can I replace my Cap B and V on a computer laptop satellite P100-347.

  pls I need help quick and serious.

  Hello

  The replaceable keys and you can order this key to ASP in your country or check various online brokers who provide such Cap sets.

  Google a bit and you will find a lot of offers

• Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all the other programs of cloud of 2015 but not PP2015.

  Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770.  You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.

  First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what?  In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard.  This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.

  I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error.  I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

• Cannot find device write VMware esx server 3i image support to.

  Hello

  I'm fairly new Virtualization.

  I downloaded: VMware ESX Server 3i Installable U4, Refresh Version 3.5 Update 4 | 153875-30-03-09 on the site and it burned on a disc. at the start of the disk and following the instructions in the installation guide, I get the following error:

  The installation operation failed!

  The installation operation has encountered a fatal error!

  Cannot find device write VMware esx server 3i image support to.

  The following system information will help the forum of VMWare support with your problem. Please note the information before proceeding.

  Information System

  Manufacturing: abandoned

  Model: abandoned

  Service etiquette: abandoned

  BIOS Rev: SGP4510H.06A.0083.2008.0819.1026

  OK, I can tell that you are new to this sort of thing, using windows XP, it is the best guide I have found for you should you walk through all the way.

  http://www.Symantec.com/connect/articles/how-create-your-own-bootable-ESX-3i-USB-stick