Satellite P100 does not start using Intel 5300 WLan

Similar Questions

• Satellite P100 - does not start until then, what can I do?

  I've had my laptop for about two years and treat it with kindness.

  However, recently it has crashed on me with a blue error screen. Then, when it it restarted just slept on a black screen with the lights and the fan is running. I left it like that for a while, to see if it was just to be very slow, but not luck.

  Help, please!

  Hello

  Hmm... You could try this workaround, Buddy:

  Remove the AC adapter and the battery and wait an hour. Then connect the two devices again and try to start the laptop.
  Maybe it works.

  If this isn't the case, I think that you need help from a technician for laptop. It could be a malfunction of the equipment.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Satellite P300 does not start immediately

  Hello

  My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

  No results?

  Hello

  I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

  Do not press the button quickly several times but slowly and keep it down for a second or two.

• Satellite A110 - does not start

  Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

  Help, please

  Hi jinskywalker,

  No display?
  No beeping?
  Nothing?

  In this case, you should read this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite C650 does not start with android phone on

  Hello

  I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

  Thank you very much
  Ian

  Cool. Thanks for the comments.

• Re: Satellite A200 does not start

  I have a Toshiba Satellite A200 on VISTA.
  The laptop does not start. I can get to the Toshiba splash screen, but don't go no more far just get the blocking of the laptop and the display one? symbol at the top right of the screen.

  I tried

  -Reset to the factory settings (no difference)
  -Starting with the battery and output (no difference)
  -Withdrawal of the memory modules and try different configurations (no difference)
  -Remove the hard drive (screen displays the details of Intel and say no HD media detected no screen Toshiba either)
  -Pressing the button to try to get in windows safe mode (can t happen).

  Title information, under settings, I see the hard drive and DVD player is connected is connected.

  If anyone has any ideas, please let me know.

  Thanks in advance

  Hi mate

  It seems that you have already tried all possible solution proposals
  But what happens if you start the laptop using a bootable diskette. for example, recovery disk, disk Win XP, Linux live CD, etc?

  I knew it could be a HARD drive problem, even if the HARD drive is correctly detected by the BIOS
  Maybe a replacement HARD drive might help maybe.

  Otherwise, it could be a serious hardware problem I m thinking: motherboard

  What do you think?

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Satellite A350 does not start

  I have a Toshiba Satellite A350 (about a year and a half) who does not start correctly. This has happened after that the laptop was left on until the battery has failed. The button of the keyboard and the power LED lights up, but the screen stays black when I try to turn it on. I use Windows Vista.

  The machine continues usually to make a sound whirring for a few seconds before it stops making noise (the fan and the HD). The screen flickers sometimes a lighter black on a screen for less than a second. In addition, the cooling fan has sometimes continued to operate after you stop all the rest.

  Another problem is that when if it is turn on and go to the Toshiba screen, odd lines will fade to the screen, and finally the screen eventually white/blue. On the other hand, sometimes it turn on and act as if nothing had happened. In these times, placing sleep mode will be to not be a wheat to turn back on.

  I tried removing the battery, using only the battery, fully charge the battery and using the laptop with barely any load from the battery and it doesn't change anything.

  I would really appreciate any kind of lead as to what may be wrong with the poor.

  Hello

  Generally speaking, it is always difficult to say something on these sometimes mistakes because it s not clear and can be caused by all parties, but at the moment I doubt that this problem is software partner

  You see something on a screen when the internal screen stays black?

  In the worst case, it s that a hardware malfunction and that would mean you need help from an ASP to check what part is affected, but if your laptop is under warranty, the repair is free.

• My Satellite M50 does not start

  Hello

  All of a sudden my M50 does not start!
  He spends nothing; When I press the Start button, it flashes a few seconds and that s all! No noise, no BIOS!

  I already tried with the plug on the battery, but no change at all!

  I found a similar question on the forum, but could not understand what the problem was!

  Help, please

  ML

  Hello

  Have you tried to boot up your laptop by using only the AC adapter? Otherwise, please, remove the battery and plug the AC adapter / CC and try again. Please post what exactly happens when you try to do.

• Satellite L650 does not start

  Have had problems over several weeks with my laptop does not start up. See: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65765

  Worked fine until last night for a week or two. Booted up ok, but gadgets has not appeared and no Yahoo Messenger that starts automatically.
  I couldn't click on all items on the desktop or the bar at the bottom of the screen. Stop and asked if I wanted to force closing down of applications that were still running. I said yes.

  Laptop turns off and then when I rebooted it came with the screen Toshiba startup and startup of Windows and the Windows logo but then received the message that Windows could not start and I wanted to start normally or repair. I ran repair, but the AI get after Windows loading files is the cursor on a black screen.

  I tried to turn off and then I get the message when start saying that WIndows did not start successfully and I want to repair or start normally?

  If I click on the repair, it comes up saying Windows is loading files and then I just get the cursor on a black screen. The hard drive light does not illuminate and nothing seems to happen (I used to open a new window).

  I tried pressing F8 at startup upward and I select the Windows repair option, but that said just from Windows and then I get the cursor on the screen black as above. I have also tried changing the boot sequence so that it boots from CD/DVD first and insert the recovery disks, but once again nothing.

  I'm now getting really tired after you have everything reinstalled at least 4 times in the last two weeks.

  I do
  (a) buy a new copy of Windows 7 and the gap of the partition recovery that she clearly doesn't seem to work;
  (b) throw the whole 18 months old laptop and buy a different brand or
  (c) is it possible that it's the hard drive which is a failure and that I should buy a new hard drive and Windows 7 DVD?

  Any help is appreciated because it drives me crazy!

  Nigel

  > I ran repair, but all THE get after Windows loading files is the cursor on a black screen.

  > but that said just from Windows and then I get the cursor on the screen black as above. I have also tried changing the boot sequence so that it boots from CD/DVD first and insert the recovery disks, but once again nothing.

  Looks like the HARD drive is faulty.
  You can test the HARD drive with freeware like Drive Fitness Test or similar tool, but car aptitude test would help you to create a bootable diskette that would test the HARD drive.

  I think that the HARD drive needs to be replaced if errors would be detected according to the news from the other thread, you have created a recovery disc, so it shouldn't be a big problem to reinstall the operating system once more once the HARD drive has been replaced.

• Satellite A100: Does not start a recovery DVDs

  Hi guys.
  First timer here.
  I have read some of the Q & A on reboot problems the A100 since the recovery DVDs.
  It seems I have the same problems as keith.

  I want to start all over again the OS and my laptop does not start from the DVD.
  Tried the standard f12 boot from cd option. tried her "hold C on the boot option.
  Both options end with no joy.

  The screen that says "loading ramdisk image", loads the machine breaks, asks me to wait, then every time the same thing.
  The screen goes black, flashes very quickly and white and then loads from the hard disk as normal.

  Now try to hold my frustration and do something radical.
  I know that in the Q & A previous, the subject is considered as replied...
  other options?

  My following thoughts are to delete/uninstall almost every thing and try and force the thing to boot from the DVD.
  have also copied the dvd and tried to boot from the copy, always with no joy.

  Are there any other suggestions?

  Is it possible to put a partition in the existing drive and start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?

  is it possible to close all essential processes and format the HARD drive?

  is it possible to reset the HARD drive somehow?

  see you soon,
  Martin

  Hello Martin

  To be honest, it's pretty strange question. There is one thing I am interesting for:
  Is - this first time, you try to use a recovery media for the installation of the OS?

  If possible, try to get the Microsoft CD/DVD facilities to see if the same thing will happen.

  In any case, I will try to give you answers to your questions.
  > Is it possible to put a partition in the existing drive and to start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?
  It will not work. On the recovery of the media it is recovery image and this image must be installed correctly. You cannot "recover DVD in there. Not question

  > is it possible to close all essential processes and format the HARD drive?
  I would like to know what you understand under the 'essential processes?

  > Is it possible to reset the HARD drive somehow?
  You can't do this somehow. If you want to 'reset' HARD drive, you must delete the existing partition or delete any OS installation. After having done that, you need to install new OS. All this will be done at the beginning of the recovery procedure.

  I really don't understand what's wrong there. Please answer to my first question, and we will continue this discussion. ;)

• Satellite M30: Does not start XP

  My Tosh Satellite M30 laptop (with 2 HD discs) does not work after I have updated with the MS security updates, it does not start XP.

  The laptop makes a clicking sound and gives me the message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I changed the boot order in the BIOS to: CDROM. And select Exit and save changes.
  Inserted my Toshiba Recovery windows XP version that allows me the option of
  "1. the recovery disc" or "2. Expert recovery mode"or also"Exit ".
  I chose "1. Recovery disc"as I'm not an expert (as you can tell!)

  I then get a load of diagnostic checks run by laptop and it shows then finally on the screen:
  X:\\ no disk fixed

  Ideally, I would like to repair and keep things I have on my drive D: HD.

  I'm pretty sure the XP starts on my drive C: HD.

  Your help is very appreciated!

  Suraj

  Hello

  The PXE message means that the device is trying to boot from the network. I put t understand you a lot with C and D HD. I assume you mean that you have two partitions on a single HARD disk. C partition for the operating system and the D partition for your data.

  If I understood you as soon as you cannot boot operating system at all. On this path, it is not easy to say what may be the problem but obviously you a problem with the HARD drive. It is probably defective. If the recovery DVDs is not able to detect one that there may be a serious problem.

  I put t know how contact the partner old Service your unit is but if the warranty is still valid and let check the device.

  Good luck!

• Satellite L850 does not start

  Hi, I have problems with my L850-150

  The thing is that it does not start. Power led turns, Nums Lock led turns, fan comes on and does nothing more, so it is not a power supply problem.

  I read in this forum that the bios update could solve the problem, but as I saw it in the instructions, it seems that the update must be done on the Windows environment, and as I said, the computer does not start, so I can not do the update of the BIOS.

  Is there another solution? Is there another way to update the BIOS?

  Thanks in advance.

  Can you please tell us more on your laptop and all you did the last days?
  You use the original OS to factory settings?
  Did you do anything that may be responsible for this (hardware or software update/upgrade)

  It is hard to believe that something like this happens for a moment to the other without any reason.
  You're right, it has nothing to with the power supply, there is something else, but on this virtual path, it is not easy to provide an accurate diagnosis.

  In the worst cases, contact the nearest Toshiba or your local dealer services provider and ask for help.

• Satellite M100 does not START

  Good, everyone

  I have 100 M Satellite
  _when I turn it on it makes 8 signals and not booting not delivered.
  I can't boot from the BIOS RECOVERY cd too.
  It works but does not start.

  HRR, RAM, all components are ok I checked.
  WHAT signals DOES 8 mean?

  Hello

  What do you mean with 8 signals?
  Sorry, but your statement is fairly general. This type of signals that you noticed?
  Audio (beep) and visual signals (flashing LED)?

  I assume you noticed flashing signals. Am I right about that?