Satellite P105 - do not print to my wireless printer

Similar Questions

• Satellite A10: Could not find the card wireless on my system

  Hello
  I have a series of Satellite A10 on which I can not find the wireless card even if it is built in.
  I tried to install it, but windows is unable to read the driver information in the .inf on th cd file.

  Hello

  Is the laptop comes with the wireless network card or that you have built into single? Can you please explain the situation in more detail.

  The laptop comes pre-installed with recovery media?

  If I remember well with WLAN driver is also a txt file called README. It is step by step explains how to install the driver.

  Good bye

• Map Wi - Fi on Satellite L40 does not connect to the wireless network

  Hello

  I have Satellite L40-15B with a realtek RTL8187Bcard. Problem is I Don t get a connection on wifi, but everything seems ok. I ve installed the BIOS update, the latest drivers and updates for Vista. Psychic Network is turned on, network switch is on, and yesterday everything worked fine. I had this problem too when I bought the laptop but thought that I solved it. Not!

  Vista tells me that everything is installed and works well. I can also see some available networks, but when I try to connect it just doesn't work.

  Someone at - it an idea what to do next? (by the way the network is ok other laptop computer wifi works fine)

  Thank you

  Albert

  Hello

  Your wireless network card seems to be properly recognized in Device Manager. And the problem is that you are not able to connect to the WLan router. Am I wrong?

  Have you tried to disable the Wlan encryption settings and then test the WiFi connection?
  You should also try to reset the settings of the Wlan router.
  Sometimes it helps.

  I got a WLan connection problem too I've checked everything twice and nothing worked Finally I reset the Wlan router. and surprise, surprise it's a key

• HP LASER JET 4 P DO NOT PRINT WIRELESS LAPTOP, HELP

  BOTH OF MY COMPUTERS ARE DELL AND HAVE VISTA, THE WIRELESS IS AN AT %T MODEM. PRINTER IS CONNECTED BACK TO CALCULATE MAIN VIA A USB-PRINTER PORT WORKS WELL WITH THE BUREAU, WILL NOT WORK WITH THE WIRELESS - OF THE CLUES?

  AT & T AND DSL (BELL - SOUTH) ADVISED me, THAT it IS a PRINTER PROBLEM, I DOWNLOADED a POSSIBLE DRIVER to the laptop. WHAT I GET IS AN ERROR MESSAGE WITH THE LAPTOP.

  NEED HELP? ANY IDEAS? SUGGESTIONS?

  You can disable the caps. No need to yell. You try to share a printer on a network. It must be established as a shared resource on the computer where the printer is connected. Can you share files between the desktop and the laptop on the network?

  Did you all put here to share the printer between two computers?

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Satellite P105 - GPU overheating as fan does not work

  I brought a Satellite P105 - S9337 laptop computer around a year ago and it's been great, but I had a problem that began a few months ago. The GPU fan does not run under windows or any OS. It works correctly in the BIOS, but when I hit the operating system, it will stop. This is obviously the cause for overhead.

  -J' tried different drivers of Toshiba and other sources. Currently using 7.15.11.5666 which was the last version of Toshiba.
  -Tried all BIOS and running 4.40.
  -Cleaned it if sure there is no dust blocking the fan wheel.
  -I even sent to Toshiba for repair 4 times and it comes back with the same question.

  It's as if the fan control is equal to change the operating system when it reaches him like bios and basic OS (dos, the flash media bootable back past) works very well. It runs when she is hot and stops when it is ok.

  At the moment that I leat overheating for a while then he seems to remember he's a fan after 30 minutes or more and comes into play. It works on OS at full speed, until my laptop loses power or I unplug battery, that I did today to increase the RAM.

  There must be some drivers or BIOS out there that allows the BIOS to manage the fan or it just as it manages itself is so it doesn't overhead. I'm not pleading can someone help me with what it's getting very boring. e-mail is [[email protected]] If you want to contact me, because I'm out of ideas.

  If I can't get this resolved I'm thinking of dismantling and wiring of the fan on but would prefer to avoid that for now.

  My laptop (P100-481) was overheating too since I have updated BIOS 4.20 and above all. The latest version of the BIOS with work-fan control was 4.00.

  There are two ways to set the fan control:

  1 go to BIOS 4.00. You'll get stuttering in games because the initialization of GPU in the form of Versions all 3.30 to 4.00 are buggy.

  2. you can try this way: [http://www.laptopvideo2go.com/forum/index.php?s=679696d192a1f43137253716ebd799b8&showt = 19190 CIPO & view = findpost & p = 79039]

  It's not easy install a double Windows, but it worked for me.

  There is a bug in the BIOS 4.20 4.30 and 4.40 and a lot of people have trouble with the GPU fan. So hopefully Toshiba find time to fix it in the near future.

• Satellite C650D - I can print photos, but can not print text

  I have the Satellite C650D I can print photos on my printer but cannot print text.

  How can I fix?

  To be honest I don't think that is the related issue of Toshiba and you should check with the manufacturer of the printer. They should help you with these questions.

  We do not know what printer you have and what you're doing exactly, but if the printer is installed, recognized and correctly connected everything should be OK, especially if you use Office Word and you want to print a document.

  Sorry, but after reading your problem description one sentence, it is not possible to say anything that will help you.
  Contact the manufacturer of the printer s technical support and try to clarify this.

• Satellite P105 carpet * a dvd player does not work with Win 7

  Greetings,

  I need an upgrade on my dvd to my vintage Satellite P105.
  I want the possible fastest dvd burner right now because I'm a fan of film and keep them in digital memory.

  (1) first should I get an external drive or can I get the best performance with an internal dvd replacement of a reseller of parts or Toshiba?

  The problem is when I've upgraded to windows 7 things have changed. I lost my sound, but that solved using a driver inherited Visa as apparently the sound 'Council' on the laptop is for Vista only. Then I found the dvd player which is a mitsu * an internal UJ-450 does not or is extremely slow in saving films, records or files. The available recording software seems also planned for Vista performance was acceptable. Even the dvd burning software does not work.

  (2) so my question for multimedia specialists is: what should be my next move?

  (3) should I go outside and confront the neck of the bottle USB or

  (4) to make the speed of the bus on the internal dvd?

  (5) given an internal dvd is preferable, because it's exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.

  (6) most importantly, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?

  Of course, if you could give me a model number and direct me to the sales it would be much appreciated.

  Thank you in advance.

  Rachel_1

  > 1) first of all I should go for an external drive or can I get optimal performance with a dvd replacement internal to a coin dealer or Toshiba?

  You should know that not all internal STRANGE machines are compatible. You will need to use a not compatible and supported and such device could be ordered in a local ASP.
  But it s more expensive as an external CD/DVD device so you could also choose an external that would be compatible with all computers and laptops available.

  (> 2) so, my question for multimedia specialists is: what should be my next move?
  As mentioned. Good option would be to buy an external burner drive ODD

  (> 3) should I go outside and confront the neck of the bottle USB or
  External device are compatible with all computers and are less expensive

  (> 4) go to the speed of the bus on the internal dvd?
  If you have the money for an internal device and want to use it with P105 only then you can also choose an internal burner.

  (> 5) because a dvd internal is preferable, because it is exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.
  As far as I know it s an IDE interface, but the device would support setting master or slave or c - salt. As mentioned, you can buy a Toshiba a recommended.

  (> 6) especially, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?
  Point 5 of the air)

• Satellite P105-S6217 - 5-in-1 SD card reader does not work after upgrading operating system

  OK, here's my situation:
  I installed my OS Satellite P105-S6217 from Vista Home premium 32 bit to Vista Ultimate 32-bit. I made sure to reinstall all my drivers. I jumped into an SD (2 gigabytes) and nothing happens.
  I checked my host adapters Manager/SD device and it says that the device is functioning properly. I noted, however, that, under the tab other devices, something seems wrong with the mass storage controller.

  I checked the status of the device and it say the drivers for this device are not installed. I swear I have install all drivers. I'm naïve about what to do next. Can someone advise me?

  Do you have the yellow marks in Device Manager?

  I searched Toshiba driver download page and there is the Toshiba memory Flash utility. In this package are the drivers for the SD card and the utility to format the SD card.
  If you install this.
  http://www.CSD.Toshiba.com-online download-online portable => Satellite-online P105-S6217

  After installation, try to format the SD card with the utilities. After that, it should work.

  Maybe the SD card not work properly, then try another SD card.

• HP OfficeJet Pro 8000 Wireless: Can I get some help here? Yellow ink will not print - HP OfficeJet Pro 8000 Wireless

  No matter what I do, ink yellow does not print, or stops at halfway printing on the page. I use genuine HP cartridges. There is a lot of ink - in fact, I just installed a new cartridge in the case where a previous (almost complete) was defective. No change. The pipe is not pinched. I flashed the firmware more recent and installed all drivers and utilities updated. I have cleaned the print heads over and over again and even took and cleaned according to the instructions.

  I think it was a sign that the printer is worn EXCEPT - just a few months ago, magenta and black stopped printing. These are the opposite printheads. When I uninstalled every bit of HP software I could find, the printer back to normal!

  The only thing I did not - it is the HP Toolbox argues that it is impossible to establish two-way communication with the printer. The patches for this involve get under the desk to play with the power cord and USB cable (even if it is a wireless printer), and my arthritic knees that make a very delicate operation. Two-way communication IS enabled.

  I'm about to start crying. I fought with this market a week, when the yellow all of a sudden went - once again, * most * of the time, but sometimes it prints to maybe an inch of the image before disappearing. Help!

  Hi @Echo2,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet Pro 8000 printer with a Windows 7 computer and all of a sudden is not printing yellow ink. I would like to help with that.

  Here is a document of support for the print quality problems - Troubleshooting print quality problems.

  Please let me know if that solves the problem, or if you need assistance.

• HP Deskjet 3050 all-in-One - scan wireless; DO NOT print wireless. Just moved.

  Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer.

  Help!  What Miss me?  Thank you!

  Moor_lady wrote: Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer. Help!  What Miss me?  Thank you!

  Hello Moor_lady, if you are using Windows 7, you can try to reset your printer wireless.

  Go to control panel of configuration, devices, and printer and in the menu bar above, select Add a printer in the lower option, select Add a network, wireless or Bluetooth printer.

  There should be another window that shows all available printers to be added. See if your wireless network printer can be found. If so, select this option and continue the process.

• Satellite Pro c660 does not connect to another wireless after format

  Hey all,.

  I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).

  After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.

  After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.

  The ideas people? More missing drivers?

  PS - I really don't want all that toshiba nanny software on the laptop.

  Thanks in advance!

  > Any ideas people? More missing drivers?

  If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.

  Are you abele to connect to other networks wireless at home?

  Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
  But note; This must be done only for testing purposes!

  You should also check if the MAC address filtering is disabled in the settings of the router.

• Satellite P105-S6197 - after that the Windows XP Home edition installation DVD is not readable

  Hello everyone (sorry for my English) :)

  I buy Satellite P105-S6197 with Vista Home Premium (RUS). Immediately, I formatted the HARD drive and installed WIN XP PRO without any problem. All drivers installed, correct and in Device Manager have no unknown devices.

  But after the operation my Win XP does not read the DVD, CD - no problem. I try to boot from any bootable - no success DVD, disc not reading. In the BIOS I normally see information DVD player.

  What can I do to diagnose my problem?
  Maybe some MS updates, update BIOS...
  Please help me :)

  Hello

  I wonder what site Toshiba driver did download you the drivers?

  Mhhh is s a Toshiba model we designed and delivered by US.
  Thus, you should use the Tosh site to download driver.

  I have check the pilot US page didn t find the XP drivers and it's one reason why I asked.
  I would recommend when even update the Win XP OS on the latest state. This means that you should visit the Microsoft site and should perform a patch test!
  http://update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Please note that, sometimes, several start-up procedures are required to install all the patches

• OfficeJet Pro 8600 Wireless Configuration - print is in the queue, then disappears. Do not print

  I just got the Officejet Pro 8600 as a gift and burden of implementing software and it on my wireless network.  When I try to print an e-mail or a coupon, the command changes to the printer and indicates in the queue. Then after a few seconds, the print queue (work) disappears without printing the document.  This command goes to the HP ePrint feature or the Officejet Pro 8600 network?  It shows the HP ePrint as being on USB.

  I have run all the Diagnostics, downloaded all the new software, software packages and updates.  I spend several hours trying to get to the printer.

  Thanks for any help you can provide.

  Hi @bksechols

  Welcome to the Forums of HP's Support.  I understand that when you send a print job to your printer Officejet 8600 to printing to the queue, then disappears without the printing of the print job.

  To help you, you please provide additional information?

  • How is the printer connected (USB cable, ethernet or wireless)?
  • What operating system do you use?
  • All print jobs fail? If Yes and you are using a Windows operating system, please try printing HP and Scan Doctor for Windows.  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems.
  • When you send a print job are sending the address of electronic mail of the ePrint printer? If so please check The HP ePrint, print not print job if you send the print job using the print command, please see the document of your HP printer print jobs are stuck in the print queue .

  I look forward to hear from you.

• Toshiba satellite 2450 s203 does not recognize the atheros wireless network adapter

  Hello!

  I have a toshiba satellite 2450 s203 and a network card wireless atheros integrated - somewhere in the laptop - there.

  However, I am running win xp pro and the Device Manager IS NOT to FIND THE MAP!

  He finds the ethernet card and a 1394 network adapter!

  But not the wireless network card!

  Any ideas? I downloaded the drivers from the card wireless site but without success!

  What should I do?

  Thank you!

  Hello
  The WiFi card is an option for this model for example. It is not included in all machines. You must purchase the correct module for W - lan to work.

  If the card is installed in the machine, you should see a yellow esclamation mark (!) or "unknown device" If you uninstalled hw.
  concerning

  Gandalfwhite

• Satellite sometimes does not detect the wireless network

  Hello

  My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

  Hello

  Well, in most cases the WLan driver update could solve this problem.
  In addition its advised to check the firmware of the might of Wlan router must be updated as well.
  I recommend also to reset the settings of the WLan router and set it up again

  Another idea; Disable the save option in Win 7 the power supply WLan management

  Welcome them