Satellite P200-157 - piMSML.dll module missing

Similar Questions

• Satellite P200-157: Atheros AR5006EG WLan - AES encryption in question WPA

  Hello, sorry for my English.

  I bought a SATELLITE P200-157 with VISTA OEM 2 months, since I can't use WPA with Atheros AR5006EG AES encryption.

  The LAN does not work because three other computers are connected in wifi on the same router. With the Toshiba pc, I just can be connected to the WLAN key if my router WEP or WPA - PSK TKIP. in WPA - PSK AES/CCMP or TKIP + AES it does not work.
  When the SATELLITE is unable to connect to the WIFI network, it return when connecting try 'Abnormally long network connection' = connection too long and after vista let me choose between a diagnosis of the problem or borrowed from another ESSID.

  Did I missed something let work AES encryption? Thank you for helping me, I have no idea to solve this problem.

  Hello

  As far as I know all this (encryption) WLAN settings must operate if the material and the pre-installed driver supports all this. I'm afraid that in your case, he can't do it because the wireless network card and all modes of AES (Advanced Encryption Standard) encryption option are not supported.

• Satellite P200-157: I do not see camera assistance of Chicony webcam

  Hello

  I recently bought a Satellite P200-157 comes with Vista Home.

  I can't open my webcam.

  In the book, they said:

  that the camera software is preconfigured to start when you turn on Windows Vista;
  If you need to restart go to start / programs / Camera Assistant Software / Camera Assistant Software

  But I don't see Camera Assistant Software from the start menu

  I checked the drivers in Device Manager and they have loaded OK as "Chicony USB 2.0 Camera"

  Can someone help me solve this problem?

  Thank you very much

  Yes, I have a similar problem.
  While the toolbar of the wizard opens next door left of the screen, it does nothing. It is grayed out. The camera does not work.
  I checked the Device Manager, it seems to be OK. (No yellow exclamation point and he says, the photo-appareil machine works)

  Is Toshiba read this forum?
  Problems with the webcam, there would be time for them to focus on the issue.

  See you soon,.

  Bill
  PS: Satellite P200/602, Vista Home premium/32 bit.
  It is 4 days old. Does not work out of the box.

• C:\WINDOWS\dfens32.dll module missing

  original title: C:\WINDOWS\dfens32.dll module

  When I start my laptop, I get a message indicating that the defens32.dll module is missing.   I want just through a terrible Virus attack, we used Malwarebytes to clean several times and it seems that we got rid of the malware, now it's just the missing dll, and it seems to cause IE to freeze.  Any ideas?

  Are you sure of the spelling? I can't find any info on either dfens32 or
  defens32
   
  If IE is the gel, go here...
   
  http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx
   
  Download the IE8 Installer and see if that isn't bringing you relief.
   
  "tmercla" wrote in message news: d6d79e5b-0d7c-487-a-8262-adf98507990d...
  > When I start my laptop I get a message that is the defens32.dll module
  > missing. I want just through a terrible Virus attack, we used
  > Malwarebytes to clean several times and it seems that we got rid of the
  > malware, now it's just the missing dll, and it seems to cause IE to
  > freeze. Any ideas?
   
   
   

• Satellite P200 - 157 BIOS update failed - need help

  Hello

  I bought a P200-157 to my son in summer 2007.
  My son decide without asking me, upgrade the bios of motherboard with the VICTORY of 1.70 he downmloaded on the Toshiba download server.

  He started the update in windows mode.
  Unfortunalety, the upgrade stopped during the backup previous version. The laptop was frozzen.

  It never boot from the problem of the tha.
  I'm tying to create a crisis, but recovery disk it of seem to exist different versions of PHLASH16. EXE.

  Do any of you know if crisis mode-recorery is available for laptop P200?
  What version of PHLAS16. EXE is required and in what mode the disk has to be create (native DOS mode)?

  I bought a USB external floppy drive and try the last days, but unsuccefully.

  Kind regards. Yves (France).

  Hi dude

  That s a pity :(
  The update of the BIOS is always a tricky process and there is always a small piece of risk.
  Usually, if the BIOS update has failed then you need a help of a technician of the ASP.

  The point is that you would need an update of the traditional BIOS to reflash the chip for the BIOS again.
  But the Toshiba driver page provides only the victory of the BIOS which can be updated only from Windows OS-based.

  Therefore, you will need to contact a local ASP which might help you.

  Dude good luck

• Satellite P200 - 10G - some programs do not work

  Hello world.

  OK, so we have a record of product recovery and we have tried to reinstall Windows, but it wouldn't work. Some of our programs as the built-in webcam and Bluetooth don't work without reason. Other programs like Google Earth and AVG, antivirus, we cannot get out of our system. I installed the laptop with the recovery disk, but now when I put this drive and I try to reinstall Windows, nothing happens. There is no error message or anything. All the programs that I installed in my notebook, I can't delete. For example Google Earth, & AVG antivirus program. I get a message that says that these programs are already deleted, but they are always in my book. My 80 GB of disk c is almost full and I have no idea what occupies this space. All my music and photos etc are on my E drive.

  Does anyone know what we should do?

  Much appreciation,
  Musa

  According to the specifications of the laptop Satellite Satellite P200 - 10G has no module BT and BT will not work.
  In the disc specification HARD is described as 120GB (5400 RPM) SATA. The question is: do you still have original HARD drive inside or you have upgraded with a new one?

• Satellite A10 - Scecrv.dll is missing

  Hi guys,.

  I have Satellite A10 Toshiba laptop.
  Suddenly, I got message on my screen that Scecrv.dll is missing.
  Reinstalling may solve this problem.

  I tried to reformat from the recovery cd, but it does not work.
  I would really appreciate if someone can help out me.

  Concerning

  What do you mean exactly?

  You are not able to boot from the recovery disc or what?

  If you want to boot from the CD, then you need to insert the CD, then turn on the laptop, press F12, choose the STRANGE as boot device and then the cell phone should begin to boot from the disc.

• Is a 3rd party compatible with Satellite P200-1EE cooling module

  Hi all

  The fan started making noise, a week after the warranty has ended, which means the replacement is necessary.

  Almost impossible to find the fan in the United Kingdom, however noticed that the fan Sunon GB0507PGV1-A my P200 is identical to that in the Acer Aspire 9300, with an identical configuration of heat sink. The differences are the slopes of Acer of 1.6 and P200 at 1.2W. I found the fan Sunon - available at the United Kingdom Acer but wanted to ask experts if it would work.

  So, what do you think?

  Thank you guys

  Hello

  The fan is not compatible with the Satellite P200.

  You must use a Toshiba fan. An ASP (authorized service provider) can help you to get a new.
  Here you will find an ASP:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• Satellite P200 - option SATA missing after upgrading the BIOS

  Hey guys!
  First sorry for my englich
  So I have a toshiba satellite p200 1jy upgrade the version of the bios (Phoenix bios) 2.70, but when I update upward I don't have the option of ahci sata or ide mode, I do not have this option, but I had before upgrade,
  so please what can I do to switch to ahci or ide mode, can I downgrade the bios version

  So thank you we

  Hello

  Must add driver SATA while installing Windows.
  During the installation process you will be asked to add the driver (F6 key)
  Then you could add the connected USB floppy disk driver.

  More details how to do here:
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm

  or here

  [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

• HARD drive and memory upgrade on the Satellite P200 - 17 c

  Hello

  I own Satellite P200 17 c. My current memory is DDR2 PC2-5300 2 GB. I would like to upgrade to DDR2 PC2 - 6400 4 GB of ram. I can do and it's going to be some speed improvements, if I update to PC2-6400 PC2-5300 instead?

  I have 2 hard drives on my P200 17 c. 2 x 100 GB. I want to upgrade one of these two HD ranging from 100 GB to 320 GB 5400 RPM. can I do this? and it'll be a difference if I update with HD who has 7200 RPM?

  Thank you

  First of all: your machine is able to handle a maximum capacity of 4 GB RAM, but please be aware that you won´t be able to use all of the 4 GB due to some limitations of the chipset that are explained in the following article: http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  Regarding the speed of module: chipset specifications are defined for PC5300, so it will not improve your speed when you install faster modules.

  If you want to upgrade your hard drive then do as you like, because it shouldn´t be any restrictions, you can install a drive with 7200 RPM with a slower.

  The only difference will be that the faster drive faster. The performance of the entire system would increase only when you´re install your operating system on the disk more fast (which is the recommendation of my side :))

• BIOS update failed on Satellite P200 - 13 M

  Hello world

  I have a Satellite P200, (PSPB6E-03G01XFR).
  Yesterday, after attempting to update my BIOS version with the windows application, my phone was cut.

  I downloaded the new version of the bios of Toshiba-Europe Web site (v2.30) and I tried to use the Crisis_Recovery_Disk but no result. :(
  Can someone help me please?

  Unfortunately, in your case only the ASP can help you.

  Does your BIOS update fails and only the ASP can update the ROM module damaged by using a special version of the BIOS

  So, don t waste time and ask the ASP in your country to help.

  Best regards dude

• Satellite P200 - question RAM upgrade

  Hi all

  I'm looking for some RAM for a Satellite P200, although I can't find it on any list of compatibility.

  I'm hoping to get two 2 GB of RAM DDR2 880.
  Can you help me please.

  The RAM will be downrated to a slower speed in the Toshiba or the 880 works perfectly?

  Thanks for your time.
  Stem

  Hello

  > RAM will be downrated to a slower speed in the Toshiba or the 880 works perfectly

  Sorry, but I don t know what you mean by 880. Do you mean the module 880 Mhz DDR2?

  There are different models of Satellite P200, but generally you can use DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM barrettes

  Compatible module runs at 667 Mhz.

  Welcome them

• Re: Satellite P200-PsPB3C-BB808C cannot locate * multimedia controller *.

  I just upgraded laptop Toshiba on Win 7 neighbors following a bad fall of Vista.
  It's a Satellite P200-BB808C.
  When I started there are two missing drivers, mass storage controller, and a multimedia controller. I did a clean install, starting with formatting the drive.
  Windows 7 loaded a - OK and all Toshiba drivers have been installed in a recommended sequence. I was able to locate the driver for the storage controller mass but still couldn't find anything for the multimedia controller.
  I've been alternating between the site of Canada and the United States with no luck.
  I have also spent a lot of time googling variations of the same question, trying to find some information on this driver. It seems that a lot of people have the same problem.
  So far, the system works fine without glitches or hang-ups.
  Any suggestion would be appreciated.
  Thank you.

  Hello

  To be honest, I don't know about driver multimedia controller you need.
  can post you the code of the provider and I can find the driver? To find:

  1. go into Device Manager, click on multimedia controller and then go into property and then go into the details. You will see a code like for example PCI/VEN_8086 & DEV_27D8 & SUBSYS...

  or http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm

• Satellite P200 - Power Saver in XP does not

  Hello

  I decided to make another thread so that questions can be answered. Right, so I installed Power Saver Driver, then reboot and then I install Power Saver, but when I try to access it from Control Panel I get a message saying 'CANNOT be opened because you do not access right to use 'TOSHIBA Power Saver'. Now, when I go in the SYs32 directory and search for Toshiba Power Saver related files I find a file named TPSBattM and when I try to run I get a "a fatal error has occurred, Code: 0 x 2.

  I tried to reinstall and withdrawal, but it still isn't working. No one has a fix for this because this problem has been so annoying on plu laptop since then and TOSHIBA still have not resolved it.
  I can't find the common Modules for Satellite P200-144. If someone could find them then it should start working again.

  Thank you and please someone try to help me.
  Neo-tech

  Why do you start different threads on the same topic?
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=114278#114278

  You must follow the premiera!

• Native for Satellite P200 MTP driver

  Since January, I have a Satellite P200.

  Tried to connect my Creative Zen Sleek MP3 player using native drivers. The pilot is yellow exclamation mark in Device Manager. The Office for Creative is a total waste of time that all five exchanges of e-mail contained virtually the same instructions that I followed without success.

  Can everything / body help? Finally, I may have missed it but y at - it a phone number or by e-mail to technical assistance from Toshiba?
  If so can someone post it please. I'm in the United Kingdom.

  Hello

  Support for Toshiba UK hotline phone number verification page.

  In any case, I think that they can not help you much. Toshiba doesn't supports the use of a third party hardware or software. What they will say, it is to contact the creative support. They have best experience with own product and know how it should work on Windows XP Home or Vista edition.