Satellite P200 - 17 c PSPB6E does not illuminate

Similar Questions

• Satellite P200 - 1FC - CD/DVD does not read discs

  I have a Satellite P200 - 1FC ' CD/DVGW TSSTcorp TS-L632D ATA Device will not read CDs or DVDs and do not respond. Device Manager shows that this device does not work correctly.

  Can you please help?

  Hello!

  Try to remove the drive from Device Manager CD/DVD, and then restart the laptop. It work?

  If this isn't the case, you should try to remove the upper and lower filters:
  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Satellite P200-144: Touchpad works does not after Microsoft Windows Update

  Hello

  I have a Satellite P200-144 and since I installed a new Synaptics driver provided for me through Windows Update the touchpad did not work.

  I tried to roll back the driver, re - install a new installation of a driver Alps (as suggested by a messsage on board), but this has no effect. I tried to revert to a previous state of the system, but this fails to happen.

  I am running Windows Vista Home Premium that came with the noteboos when I bought a few months ago. I also went in the settings in the control panel and none of the settings work - help!

  Someone has it has happen to them, or does anyone know of a fix for this?

  Kind regards

  Chris

  Hello

  a quick and efficient solution would be to backup your data on an external (DVD, USB - HDD, etc.) to recover your machine and then to AVOID such Windows updates, as this driver IS not native drivers from the manufacturer. Just install the drivers supplied by toshiba, since they act on your machine.

  Unfortunately I have Don t have another solution for you, then it would be best to try this method and give a quick answer if it worked.

  Welcome them

• Satellite P200-199 - Win XP: does not work Fn + F5... Keys Fn + F9

  I had to install Windows XP on Satellite P200-199. After installation, Toshiba Hotkey Utility consists only of keys Fn + F3 and Fn + F4 and I can't change the brightness of the screen. How can I solve this problem? All programs and drivers XP downloaded from the website of Toshiba and installed correctly. BIOS version is the last (1.7.0). I can't work under Vista, and I choose Toshiba only for possibility of installation of XP :). If there is a way to change the brightness of the screen without hardware key (i.e. through a program or applet control), it is acceptable too.

  Thank you.

  P.S. On the Toshiba site, there is no version of Toshiba power saver utility for XP (for Satellite P200), but I try to install 7.08.05 version - there doesn't work (CANNOT be opened because you do NOT have right to "TOSHIBA Power Saver"). I have administrator rights (Administrator installation).

  Post edited by: SweN

  Hello

  Have you installed all the drivers in the correct order?
  Installation file instruction txt on the Toshiba page shows you the step by step guide line that the order of installation is necessary!

  With regard to the issue of keys FN;
  To my knowledge, the update of the BIOS is necessary. BIOS 1.7 - winner is not designed specifically for the XP operating system and therefore, it may happen that after the installation of the operating system XP, some functions don't work properly!
  Unfortunately, I didn't find another version of BIOS for the P200-199 PSPB0E series.

  See user's last message * vjkostas *.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24798&TSTART=0

  Concerning the issue of energy saving;
  The bomber screensaver utility and the Poser saver driver are available on page. I think first of all the pilot, and after restarting again the standby electricity utility must be installed.
  But take a look at the installation instructions.

  concerning

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Satellite M100 does not illuminate unless the AC adapter is pluged

  I am also having the same problem with my Satellite M100. The computer does not illuminate unless the AC adapter is pluged and plugged into the power outlet.

  Any ideas on how to solve this problem? The battery should be fine.

  B.

  Hello

  Well, to me it sounds like a battery problem
  Why you say that the battery must be good?
  Have you checked it or because the technician?

  In most cases if the battery is faulty then the laptop would have no power until it would be connected to the power adapter.

  So I think (but that's just my personal opinion) the battery must be enabled (by technician, ASP) and if necessary should be replaced.

  See you soon

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Satellite A300D does not illuminate

  Toshiba Satellite A300D does not illuminate

  The battery light is red when it is plugged in with the light of the white plug

  When I press the power button it lights up two other fires, and one that looks like a sheet a4 fact paper.it a vibration when turning it on also.

  Any help would be greatly appreciated

  Disconnect the power adapter and remove the battery.
  Leave the laptop unplugged and then hold down power button / stop along 30 sec.
  Then reconnect the two parts and check how the unit works.

  In which case nothing would be visible on the screen, try replacing the RAM modules. Perhaps one of the modules is the troublemaker
  Otherwise if the RAM modules are OK, the problem could be linked to the motherboard.

• Satellite L500-1DT does not illuminate

  My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

  You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?

• LED light for Wi - Fi on Satellite L40 - 14F does not illuminate

  Is he someone correct the problem with LED light for Wi - Fi on L40 - 14F?

  What do you think average is by any fix for the WLan light

  Are sure you that you have enabled the WLan switch on the side of the laptop?
  Only this switch controls the WLan light!

  If the WLAN led does not illuminate after that you have activated the WLan switch there is something wrong with the hardware.

  then if there is something wrong with the hardware of notebooks is needed the help of ASP.

• Satellite P200 - 17 c PSPB6E - battery and charger delivers

  Hello

  I was wondering if anyone can help.

  I had my laptop Satellite P200 - 17 c PSPB6E for about 2 years. For the last 6 months the battery and the AC adapter have been gradually getting worse.

  The adapter is now very loose and I need to hold it with one hand while using the laptop. The same battery with the AC charger in place does not increase (it shows 0% available plugged in, load). If the AC adapter slips, the laptop is dead and I need to recharge.

  Essentially, it seems the only thing keeping the laptop on, is the adapter (which itself is very loose).

  I need to know whether a battery or a problem with the AC adapter. I had only the laptop for a short period and would not have expected problems early.

  Thank you

  Baker

  Hello

  In my opinion, that your laptop is quite old (2 years) and these things can happen, mate.

  But I think you need new batteries and AC adapter or motherboard. If the battery doesn't charge with adapter connected the case is clear: the battery is faulty because she will not be charged.

  Regarding the connection of the adapter problem AC/DC it's hard to say because theoretically, it could also be a problem with the socket on the motherboard. This is why you should ask a technician for laptop. The technician can tell you what the problem is.

  Welcome them

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?