Satellite P200 - cannot install the Atheros drivers

Similar Questions

• Satellite P100-429 - cannot install the display drivers for Win XP SP3

  Hello

  I have Toshiba p100 429 portable, installed with win xp professional sp3. I am unable to change the screen resolution of 640 by 480.

  In fact, I tried to download the toshiba site display driver but after installing the driver, it gives a blue screen with error error NV4_mini.sys.

  After that I can't yet run my laptop.
  I currently use the external monitor (master B2230 synchronization). I also tried to download the drivers from the Nvidia site, but that does not work either.
  Low resolution on my screen. Thanks for your help

  Have you tried to install THIS driver?

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Satellite L500 - cannot install the Intel video driver

  Ok
  complete failure of the hard drive, no recovery cd was created, reloaded windows 7, looked up and downloaded the drivers from Toshiba, BUT there are only two video drivers listed, amd and Intel, both marked "for model only supported" its an Intel machine so I tried the Intel driver but it doesn't install, it just closes which I believe if the corresponding material is not found is the default action for these drivers.

  But I'm stuck with 'standard VGA graphics adapt' all other drivers loaded perfectly, (I installed the driver from chipset Intel first and rebooted, so it should be ok but it s not)

  Any ideas?

  Rgds
  SYB

  What Satellite L500 you exactly (L500-xxx)?
  Do you use 32 or 64 bit OS?

• Satellite Z830 - cannot install the Eco utility because of the wrong version of the OS

  I installed Windows 8 from the original CD (not an update) and installed many pilots. When I try to install the Eco utility, it goes all the way to the end but then tell me that the operating system is not supported with load (translated) and cancel the installation.

  What can I do?

  Concerning
  Benny

  NB: Satellite Z830 and this is the version Win8 Eco Util (eco-20121126101818)

  Can you please post exact model laptop (Z830-xxx)?
  I just want to check if Win8 drivers are available for your laptop satellite.

  http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp

• Satellite M30x: Cannot install the VAP - ID-ERR-NOTINSTALLTVALTZ

  Hello

  I have a little problem with my satellite M30x and Vista system. I need to change the cooling method to slow down the CPU fan, like I did in WinXP using Toshiba Power Saver.
  Unfortunately, the utility seems to be available for Vista.

  I tried to look for a solution that might be Toshiba precious package added. It is supposed to add the change of method option in Vista power settings, but I can't install the program - ends with an error "ID-ERR-NOTINSTALLTVALTZ-MESSAGE."

  General Council is an update of the bios, but the latest version I found - 1.90, video ATI - is already installed.

  Please, is it possible to get rid of the noisy fan without downgrading the OS?

  Thank you very much.

  I wonder where you found the VAP (value added Package) for this model of laptop.

  I checked the page European driver of Toshiba and found some drivers for 32 bit in archiving Visa
  But no. VAP!

  That's why I have only one explanation why this error occurs; you have tried to install this software that is NOT compatible with satellite M30X!

• Satellite M200 - cannot install the WiFi XP driver

  Hello

  I recently acquired a Satellite M200 (PSMC0A-02G00M) a friend off the coast and decided this downgrade to XP. This model also has bluetooth. All the drivers work well, with the exception of a Wi - Fi connection - I install bluetooth, which works quite well. When I flick the Wi - Fi switch, this also seems to turn on Bluetooth power.

  Windows XP does not detect the integrated Wi - Fi. If you have any ideas, it would be much appreciated.

  Thanks in advance,

  Sam

  Hi sam.mul,

  I think that you need to install the WLAN driver before you can use the internal WIFI card. Have you already installed it?

  You can download it on the Toshiba site. After that, it should be possible to use the WLAN card.

  Check this box!

• Satellite C855 cannot install the driver

  Hello

  I have problems with the installation of the WLAN drivers on a new Satellite 12W c855.
  In information system (problem devices), I get a message

  PCI\VEN_10EC controller network & DEV_8723 & SUBSYS_072410EC & REV_00\4 & 13F D83EA & 0 & 00E1
  Not available ACPI\TOS1900\2 & DABA3FF & 2

  None of the drivers of Toshiba wlan download site.
  With VEN code that you can see it is Realtek, but it does not work

  Operating system is Windows 7 x 64

  Help please

  Thank you

  Hello

  What happen exactly when you try to install the Realtek WLAN driver?
  Is there an error message?

  You have installed all the other stuff like driver chipset display driver, driver sound, Toshiba addd package before installing the WLAN driver?

• Satellite P200 - cannot install XP due to lack of HARD drive

  Hello...

  I have the Toshiba Satellite P200, with Windows Vista home edition.
  I want to remove and install win XP but I have the problem;
  I can t install windows xp. I have this message: Setup doesn't detect any hard disk...

  A friend tell me what s due to the update of the Bios, but I can t solve the problem

  Please help me

  Thank you

  Hello

  First of all you shouldn't t believe everything say this as some computer beginners.
  It s NOT a BIOS issue.

  Your HARD drive is not visible during the installation of Win XP because the SATA driver was not included!
  The laptop supports the SATA controller and a SATA driver must be included in Win XP to recognize the HARD drive!

  But I don t want to write the whole story again that this issue has been addressed 1000 times here in the forum. I recommend this forum a little bit and search for similar topics regarding the installation of Win XP.

  A hint; Intel Storage Manager contains the SATA driver ;)

• Satellite L300 - cannot install the display driver and chipset

  I downloaded the site Web of Toshiba XP drivers.

  Now I'm getting errors when I try to install. Display drivers and Intel chipset gives me the error:
  "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

  What can I do?

  Hello!

  Are you sure that you downloaded the correct drivers?
  For Satellite L300 are different numbers of models available to check if you have chosen the right way.

  You can also install the drivers manually. Go to Device Manager > right click on the graphics card (or other device) > Update driver

  Good bye

• Cannot install the downloaded drivers on the desktop Dell XPS HP Support Assistant

  HP Photosmart C4795

  Windows 7 64 bit

  Error message "the system cannot find the file specified" when you try to install the software with window entitled "C:\Users\Mitch\AppData\Local\Temp\7zS0D90\Setup\... \Setup\hpzpnp40.exe".

  Had a virus in AppData that needed to be removed with the antivirus program, followed by the printer does not.  When tried to download drivers & software HP Web site install has been abandoned with the above error message.

  Would appreciate assistance.  Thank you.

  Looks like Windows is confused and looking for a file that is no longer there. Try using the brush included in the CD or download.

  Of the original printer installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4.bat uninstall_ for computers not HP. For HP computers, run the Uninstall_L3.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  9. use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  10 download the drivers and full software features
  http://goo.GL/xsREL
  11 start the download to reinstall the printer

  Starting a download:
  1. run the disk cleanup on your computer
  2. download and run the software and the drivers below.
  http://goo.GL/xsREL
  3. once the download is done retrieve, cancel the download.
  4. click on the start menu.
  5. click on run.
  6. type %temp% enforcement
  7. Locate and open the folder starting with 7z (example: 7zS2356)
  8 open the Util folder
  9 open the CCC folder
  10. run the L4.bat uninstall_ for computers not HP. For HP computers, run the Uninstall_L3.bat
  11. once the uninstall is complete, restart the computer
  12 run the Accessories\ System Tools Disk Cleanup
  13. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  14 use this tool to clean the system and the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  15 download the drivers and full software features
  http://goo.GL/xsREL
  16. run the download to reinstall the printer

• Satellite A500 - cannot find the display drivers for Windows 7

  I can't find the video drivers for Satellite A500 - 1 c 0, P/N: PSAR3E for Windows 7 x 86.

  I tried on the Nvidia site, they recommended the manufacturer's website...

  Hello

  Normally, you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I checked this and it seems that for the moment no are no 32 bit Windows 7 drivers available.

  What you can do now is looking for other display drivers. Maybe an another Toshiba laptop has the same graphics card and it has Windows 7 drivers released.
  Otherwise, you can try the 32-bit drivers for Vista. Normally, they also work on Windows 7.

• Satellite A300 - cannot install the Win XP SP1

  I tried to install my MS Windows XP existing operating system - original disc, has worked several times before - a model A300 - 29K, and it has not worked. (blue screen, error)

  (Vista can be installed - if the machine is OK)

  The question is: is it possible, that this model is not compatible with XP?
  (this version of XP is old enough, only SP1 - I usually improve with SP3 after installation)
  No idea how to install my version of XP on it?
  (the machine is sold without an operating system - so not any disk with it)

  Thank you

  Hello

  Of course, you can install Win XP. It s no matter what version is XP Pro, Home, MCE, etc..
  The problem may be the lack of SP2 and SATA drivers!

  First, you must create a disk for Win XP SP2 and SP3.
  For this, you can use the nLite tool

  Google for the nLite for more information

  Secondly, you use nLite to include the SATA drivers for Win XP disk.
  The SATA drivers are part of the Intel Storage Manager

  There is a lot of discussion on the installation of the driver SATA I recommend to use the advanced search option and read the content.

• Satellite P200: Cannot open the Power Saver - fatal error in Windows XP Home edition

  Hello

  I just installed XP and I came across a problem that is boring. When I finished to install Power Saver and the driver, I got a message saying fatal error and I thought it was because I haven't restarted. Then, after only a day or 2 later I went to the energy saver and he said cannot open because you don't have access rights to "Toshiba Power Saver.

  Is there a solution to this
  Neo-Tech

  Hello

  I put t know if this is a solution but try my proposal:
  First of all, remember that you are registered as an administrator or make sure that you have administrator rights.

  Remove your old system energy saving. You must remove the driver and utility.
  Then reinstall the computer and clean the registry using the freeware like CCleaner.

  Then install the driver of saver of power and after reboot the new install standby power plant.

  I hope it helps

• Updated satellite L40 - cannot install the VAP 1.2.40

  I have a Satellite L40 running Windows 7 32 bit.

  Just got an alert on Tempro (yet) asking me to install a new version of the * value added package * (PPV)

  Version 1.2.40 apparently published on 21/09/2010.

  Unzipped the download and again error _ * 0x8146045B * _ when I try to install.

  Help! Someone at - he managed to install the package VAP with WIN 7?

  Hello

  Have you had problems with the previous version?
  Isn't it? So why you want to update? Just because Tempro says there's a new update?

  In any case try to manually download the VAP.
  means that you should visit Toshiba Europe page.
  Save the PPV on the HARD drive and unzip it.
  Uninstall the VAP old everything first, clean the registry with CCleaner.
  Then try again to install VAP