Satellite P200 - error code 19

Similar Questions

• disks of backup creation for a toshiba satellite receive error code error zzimages\zzimages\preinst.swm 020150-20-00000000 will help what I do

  disks of backup creation for a toshiba satellite receive error code error zzimages\zzimages\preinst.swm 020150-20-00000000 will help what I do

  Hi jaygoldstein,

  ·          What program you use to create backup discs?

  If you try to create backup discs using software created by Toshiba, I suggest that you post your question in the forums of Toshiba.

  http://forums.Toshiba.com/

• Satellite P200 - error when creating new recovery disc

  Hello

  I need to format my Satellite P200, but I have some difficulty. I lost the original disc that came with the laptop. I tried using the Recovery Disc Creator, but every time I run the application it I'm greeted by this error:

  An unexpected error has occurred.
  Exit this application and start it again.
  (Error code: 0D00F6-26-00000001)

  Have tried to reinstall, I just get the same error. What should I try next to the difficulty of the creator, or just the format differently?

  Hello

  I'm not very well if the Satellite P200 was equipped with drive recovery procedure HARD but nevertheless it s m worth a try.

  If the HDD recovery procedure is available on your P200, then you should see the Toshiba HDD recovery option in a new window as soon as you click on fix my computer.

  Otherwise, you will need to order the Toshiba Recovery disk:
  https://backupmedia.Toshiba.EU/landing.aspx

• Saver 0x47f on power satellite fatal error code

  Hello

  I have a problem with energy saving on my satellite.

  When windows starts up a box appears saying ' program error fatal toshiba power saver will end. 0x47f error code»

  I tried to use the cd tols and utilities to try to reinstall the program saving energy, but when I click on setup on the interface, a box pops up saying

  C:\WINDOWS\SYSTEM32\AUTEXEC. NT. The system file is not for windows applications running msdos and Microsoft. Choose close to terminate the application.

  I tried to install from the msdos also command prompt but no luck it has the same message.

  Can anyone help?

  Hello

  This error message can occur if one or more of the following files are missing or damaged:
  -Config.nt
  -Autoexec.nt
  -Command.com

  I found this info useful here in this Microsoft Knowledge base article
  http://support.Microsoft.com/kb/324767

  try to repair the Autoexec.nt file and after new reboot you might to reinstall the Toshiba Power saver again!

• Satellite L550 - error code 43 for USB

  I have a Satellite L550. There are sometimes problems with the recognition of USB devices. I use Windows7. In Device Manager, I found the error code 43 is displayed under the USB controllers section. I already read on the Internet; the problem might appear because of a capacitor on USB controller that stores a charge to keep certain settings. These settings can get damaged. The proposed solution is to unplug the computer and empty the load completely from the map. When the code 43 error, any device USB is not properly recognized.

  Does anyone know the problem? Is the scenario that I described the source of the problem, I don't know, but I think it could be?
  Is there a definitive solution to the problem?

  Thanks for any help.

  > I already read on the Internet. the problem might appear because of a capacitor on USB controller that stores a charge to keep certain settings

  It can also take place... Have you tried to update the chipset utility from the [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]? The driver of the usb controller is responsible for these functions, which is part of the chipset drivers. Thus, it is worthy to update

• Satellite 5100 - error code: 4 short Flash, 1 x long, 3 short films

  Hi all

  After I accidentally served Coke for my satellite 5100 503, it was totally cut off. My brother managed to clean it up, and it began. But shortly after, she turned to and just give this error message by flashing the power before conduit: 4 x SHORT 1 x LONG, 3 x SHORT

  I managed to interpret it using some web sites. This is a 10: 00 hex code and means: 'AC output voltage adapter's more than 16.5 V.

  And here's what they recommend, if the adapter is ok (and it is, I checked):

  After checking the connection, follow these steps:
  Check 1
  Replace the AC adapter with a new one. If the adapter does still not work, try 2 check.
  Check the box 2
  Use a multimeter to make sure the F8800 fuse on the motherboard is not blown. If not, the fuse is broken, go to 3 check. If the fuse is broken, go to test 6.
  Check 3
  Use a multimeter to make sure the F1000 fuse on the battery tray is not grilled. If not, the fuse is broken, go to 4 check. If the fuse is broken, replace the battery with a new one by following the instructions in Chapter 4.
  Check 4
  Make sure battery cables Council are well connected to PJ8820 and PJ8821 on the system board and PJ1000 and PJ1001 on the map of the battery. If they are firmly connected, go check 5.
  Check 5
  The battery or System Board may be damaged. Replace it with a new one by following the instructions in Chapter 4.

  Do you think I should go ahead and change the whole motherboard? I don't think it is a fuse, because sometimes the laptop starts and stays on for 10-15 minutes before turning off. In addition, it does not work with the battery! Only the sector...

  Thanks for you comments, but I really wonder how did you find the error code mean?
  The Satellite 5100 has been delivered with the Toshiba BIOS!
  Please note that different BIOS provide different error codes.
  This means that the 10 h error code mean Phoenix BIOS, something different than the Toshiba BIOS!

  I recommend to contact the ASP in your country and ask the details of error code.

  PS: One of my friends did the same. Shake the glass of coke on the keyboard, and the laptop has been cut.
  New bad dude... the motherboard has been replaced.

• Satellite L300D - error code 19 Device Manager on the CD/DVD drive

  I have a model of Satellite L300D PSLC0E and you just install Windows 7 upgrade from Vista, everything goes well outside the HL-DT-ST DVDRAM GSA-T50N ATA DEVICE and ATI. With the HL - DT - ST DVDRAM GSA - T50N ATA DEVICE this a driver problem, it is said it seems to do with NTI Backup 4, tried to update for NTI Backup now 4.5 but still no luck.

  With ATI I run updates and reinstalled the program, system check, it shows that it is installed and everything works, but I don't seem to be able to change the display settings most important is 1200 x 800, I seem to think that with ATI there should be more, but not sure because when I start to run a set of changes in the size of the screen to 1024 x 768 , and I can't change anything. Any body any ideas?

  Grommitt60

  Hello

  (1) also tried to remove the capital letters and lowerfilters in the registry? In the forum, I noticed that this does not resolve this error code. On the Microsoft Knowledge Base, you can find a solution for this:
  http://support.Microsoft.com/kb/314060

  (2) I also have Satellite L300D and the maximum screen resolution is 1200 x 800. So you can set a higher screen resolution on internal monitor, this is possible on the external monitor.
  And normally, you can change the resolution of the screen in every game. Check this box!

• Satellite P30 - error code 43 on the graphics card in Device Manager

  Windows Vista Professional Edition loaded as my new OS for the studies and course work. Now my display driver no longer works correctly.

  Device Manager displays the following message on the graphics card ATI Mobility Radeon 9600/9700: 'Windows has stopped this device because it has reported problems. (Code 43) »

  Have search everywhere on the web for solutions but limited knowledge prevents me to get a positive result. There must be someone out there who can help...

  Hi BigPappaDom,

  In my opinion to get rid of this, you need to reinstall the display driver. I have checked the site of Toshiba Satellite P30 is no Vista driver available. This means that you must find yourself to get all the drivers. :(

  I searched a bit and you should try to install the Satellite P200D display driver. She also equipped graphics card ATI and this driver must be compatible with your other oldest:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite P Series > Satellite P200D > display driver

  Check this box!

• Satellite A300 - error code 39 on CD/DVD drive

  Does not recognize my Satellite A-300 PSAJ4E DVD - RW and CD-ROM drive. He says cannot load the drivers for the device, it may damaged or lost (code 39). I didn't download the drivers of Toshiba support center.

  The exact name of the appliance: * PIONEER DVD - RW DVRKD08A ATA DEVICE *.

  What should I do? Thank you

  Hello!

  Research on Microsoft Knowledge Base takes only a few minutes and I founded this article:
  http://support.Microsoft.com/kb/314060

  Then, follow the Microsoft solution to remove upper and lower filters. After that, the player should work again.

  Good bye

• Re: Satellite P200 - error recovery

  No sound has take me the opportunity to use the Toshiba recovery disks.
  After that the 1st disk it has little at the end, the error message is displayed

  Preinst6.swm
  Type: stormwater management
  File size: 644 Meg
  Updated: 27/06/2007 20:06

  Three options are offered Try Again - Skip - Cancel.

  I tried to try again two times
  I tried to blow it twice with no result.

  When I select option (Skip) I am directed to install Recovery Disc 2.

  After it installs, I show the
  Error message:
  Boot MGR is Missing and charged with using CTRL + ALT + DELETE to restart.

  Once it's done
  : Error recovery 10-fc06-0002
  Please press (OK) to shut down the computer.

  Any assistance with this drama would be greatly appreciated

  Hello

  First of all, you should tell us what phone you use.

  Have you checked the disk for recovery if it s rough or something else?
  You can install Windows from a Microsoft installation disc?

  In your case, I would try to format the HARD drive before using the Toshiba recovery disc. To format the HARD drive, you can use a Windows XP disk for example.
  Check it!

  Good bye

• Satellite P200 - 1FC: CD/DVD player won't start - error Code 10

  My Satellite P200 - 1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD drive is listed in the device as "TSST corp CDDVDW TS - L632H ATA Device" Manager.

  Initially, the drive worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  By clicking on 'could not load driver software' product solutions but not solution.

  The search for similar issues in the forums of users suggests that use of a page of Microsoft Support Help & directed "the CD-ROM drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".

  However it is to change the registry! As a relative novice, I am reluctant to do unless I can find no easier way.

  Should I bite the bullet and and enter into this minefield, or is there a better way?

  > At first the car worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  Certainly, this error is caused by an incorrect registry entry.
  I had this error several times and I solved this disassembly of these registry keys upper and lower filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here are a few steps how it worked on my Windows system;
  -J' removed the Device Manager CD/DVD drive
  -Then edited the registry as described above
  -Restarting the laptop

  I'm sure that this will also help you.

  Good bye

• Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

  Hello

  I am trying to create the recovery disc for my new Sat P200 and it gets 1/3 of the way (1/2 way through the first disc) and displays an error message:

  "The question has occurred during the recording of the data on the disk. The current process will be stopped.

  An error occurred during the registration phase. Please check if the disc is scratched or dirty. If so, please try again with a new disc.

  (Error code: 0E01B5-26-2A030C00) »

  I tried twice on nine discs Verbatim DVD + R.

  Any suggestions as to what causes this problem?

  See you soon
  sophiajs

  I recommend you test different DVD media.
  Try DVD-R and from different manufacturers.

  From my own experience, not all CD and DVD is cared for and compatible.

  Greetings

• Webcam on the Satellite A200-175 does not work - error code 10

  Hi all

  I bought a Satellite A200-175 yesterday and I am trying to use the webcam, but it does not work. I searched the forum for possible solutions, but so far I have not found anything that solves my situation.
  The laptop came with a preinstalled Vista OS, but the software of the webcam was not preinstalled. So I downloaded the latest Toshiba download page doftware and installed.
  Subsequently, it still does not work and so I changed drivers for generic Microsoft (based on the advice of the forum).

  I tried to reinstall drivers (several times), but that did not help. Device Manager keeps giving me the error code 10 (device cannot be started).

  I'm a bit of idea, so any help would be appreciated!

  Hello Franca

  It's very strange because I installed the recovery image on notebooks P200 and U300 (both with the webcam) and I didn't notice any problem. After the first boot the cam will be recognized as new hardware and installed correctly.

  Have you installed some Messenger like Yahoo or MSN and try to use it with one of them?

• Satellite L850 - Error 0xC0000005 Win8 installing Code

  Hello, I have a Satellite L850-1v3 phone and I accidentally destroyed my hard drive

  Now, I am trying to install Windows 8 in a new hard drive but it is still stuck on 89% and this error code come '0xC0000005 '.

  I tried with different installation discs through CDROM, usb etc.

  What should I do?

  Another question that comes up is "where can I find my key series of Windows 8?

  Thanks :)

  You try to install Win8 64-bit original version you got with your machine?
  Have you bought any new HARD drive?

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning