Satellite P200 - failed to connect to the Windows Services

Similar Questions

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• FAILED TO CONNECT TO THE WINDOWS SERVICE (GROUP POLICY CUSTOMER SERVICE)

  Hi I have the same problem is started when I was looking for a driver for a usb camara the problem may be caused by a bad driver who does not belong...

  I am currently running my laptop on safe mode, so I can solve the problem. I use system restore and tried to solve some problems in the registry but still keep getting the pop up C:Windows\system32\Config\systemprofile\Desktop is not accessible
  I do not know completely what is the problem.
  I also have another pop up on the side saying "FAILED to CONNECT TO WINDOWS SERVICE (SERVICE to CUSTOMER GROUP POLICY)...".
  HELP PLZ

  Hi Jesse310,

   

  Welcome to Microsoft Answers Forums.

  • When you get this error message?
  • You are able to boot to the desktop?
  • What is the version of Windows installed on the computer?

  This can happen more often if the user account is corrupted or some missing files.

  First of all, I would say that run you a virus scan online on the computer to scan and remove infections of viruses or malware on the computer and check if it works.

  See the link below for the on-line virus scan and perform a full scan of service on the computer.

  http://OneCare.live.com/site/en-us/default.htm

  If you are unable to boot to the desktop in normal mode, I would say that you start the computer in safe mode with network and try the online scan.

  Steps to start in safe mode with networking

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

   

  Start your computer in safe mode

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If the step above does not resolve the question suggests that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to connect to the JMX service (209,1046) when you try to view the logs in PeopleTools 8.55

  I am trying to use the new functionality of Log Viewer PeopleTools 8.55.

  It is a great improvement that allows developers/testers/support team members to display the application server logs, process scheduler logs and newspapers PIA; with a regular account of the PeopleSoft Application.

  You have no need to create a system account on the server (Linux or Windows) for users to view the logs.

  I managed to configure the Web server log viewer, but when I try to Application I can see message failed to connect to the JMX service (209,1046).

  
  

  When I configure the JMX for APPDOM user, I tried PTADMIN with no success.

  
  

  Could someone describe the process to change the JMX user for Tuxedo domain?

  
  

  Thank you

  Stéphane.

  the default installation of DPK password is password.

  Kind regards

  / Stéphane.

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• When I start my computer I have the error message: "failed to connect to A Windows Service.

  A few days ago, I received this message by turning on my laptop:

  "Could not connect to a Windows Service - Windows cannot connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  However, when I go in the view of the event log, the "Event Viewer" window opens and I get this error message:

  "The event log Service is unavailable. Check that the service is running. »

  There are several other programs that will not open not because the message "failed to connect...". "appeared.

  I received help with back - light to the Windows event log. Everything was going well until I arrived at the end status section, instead of saying "started" it said "stopped". I've changed the status in the direction of "on the road" and then received the following message is displayed:

  "Windows could not start the multipoint Windows event log on the Local computer. Error 1747 - the Authentication Service is unknown. »

  What should I do now?

  Hello

  I suggest you follow under method that can help you solve your problem:

  Method 1: try to make the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Failed to connect to the Windows and WLM service does not

  Hi, I hope someone can help me.  When I turn on my laptop the message "unable to connect to a Windows service.  Windows could not connect to the Group Policy Client Service... "That would be the reason I can access is no longer my Windows Live Mail 2011?  I hope you can help, I did no progress so far with someone or something...  Thank you I have upgraded from Windows 7 to Windows 10 a few weeks ago.

  Hello Richard,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  For the Customer Service of Group Policy error, please refer to the suggestions of P.L.X. responded on February 2, 2013 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-wont-Windows-connect-to-the-Group-Policy/b73107f8-8447-4599-87a5-65ecc6a63aa0

  For cause of Windows live mail , I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows Live Mail stops responding or does not start after the installation of KB2454826
  https://support.Microsoft.com/en-us/KB/2505524

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite P200 - unable to connect to the WLAN router

  I have a Satellite P200 and that you have upgraded from Vista to Windows 7.

  The wireless is working and to see available networks, but trying to connect it does not ask the WEP key, it just says: he has a connection problem and (possibly) says that it cannot connect.

  Someone at - it clues on this?

  Thank you.

  Hello!

  It's really strange Mavourneen. I also have Windows 7 on my Toshiba laptop, but I put t have problems to connect to my router WLAN. Everything works fine on it.

  Can I ask you if you tried to update the driver WLAN? You can download the latest version here:
  http://APS2.toshiba-tro.de/WLAN/

  Have you tried to update the BIOS?

• Unable to connect to the windows service

  I get an error "failed to connect to windows service" started reading the forums, I see this is a relatively common mistake.  I tried several suggestions without success.  I ran SFC who has corrected a mistake.  My computer does not connect to Internet "State of the unknown connection, the dependency service or group was able to start" by other threads, I tried to look at the event log, but it will be does not seem to be running.  Looking at the services I see that the DHCP client is starts but never fill in start mode.  I checked this service dependencies; AFD for Winsock, TCP/IP, the NSI proxy service protocol driver.  None of these three shows in respect of the services, so I don't know how to check if these services are running.

  I also went on the Lenovo website and downloaded and installed the Intel chipset driver and driver Intel LAN Nineveh.

  Any suggestions?

  Hello

  1 redefine ALL services on their default values.

  Logon as ADMINISTRATOR

  BlackViper - Vista Services
  http://www.blackviper.com/WinVista/servicecfg.htm

  Start - type in the search box-> find Services at top - right CLICK top - RUN AS ADMIN

  2. switch to update or re - install the NIC (network card) and WiFi (wireless) drivers from the Lenovo site.
  Check with Lenovo support, their drivers and documentation online and ask in their forums for
  known issues.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP ENVY 4-1200 ultrabook: unable to connect to the windows service

  I got this notebook for a week, it has started to come on the screen at startup * unable to connect to windows. Windows could not connect to the group. Political Clent. This problem prevents standard users connect * did anyone know what I can do about it at the start. Thank you

  Please try the fix described below:

  

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Failed to connect to the shared services provider

  Hai,

  I got question about Smartview.

  I use hyperion 11.1.2.3.500 and smartview a workspace-> Tools download

  I can not connect with a connection shared with the URL ' http:// (Server): 19000/area of work/smartviewproviders '

  It happened when I connect with the VM or not VM

  When I connect with no VM, my friend can see this URL, but not me.

  Can do some assistance?

  I have this problem, I have problem with Adds on in Excel, PDF My suite blok the smartview

  Thanks for your Attention

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• 8 win fails to connect to the Agent to install all the Windows user

  Hello

  When I start Windows 8 I get a box saying cannot connect to a windows service. Windows all users install the agent service. Event ID 7000. If I'm on online help link I get "page not found". The result from my point of view is that I don't seem to be able to install updates for all programs. Windows updates crashes and PSI download updates but hangs when it comes to installation. I don't really want to reload Windows I'll lose all my 3rd party software and it takes an age to recharge. I had to do it about eight times since I got Windows 8 (7 months). Can anyone suggest a solution please. I'm reasonably computer literate, but I do not understand about the permissions etc. Ive tried to attach a copy of the event log details.

  Thank you

  Save the details below.

  +

  System

  -

  Provider of

  [Name]

  Service Control Manager

  [Guid]

  {555908d1-a6d7-4695-8e1e-26931d2012f4}

  [EventSourceName]

  Service Control Manager

  -

  Event ID

  7000

  [Qualification]

  49152

  Version

  0

  Level

  2

  Task

  0

  OpCode

  0

  Keywords

  0 x 8080000000000000

  -

  TimeCreated

  [SystemTime]

  2013 06-21 T 16: 35:28.673941600Z

  EventRecordID

  33066

  Correlation

  -

  Execution of

  [ProcessID]

  812

  [ThreadID]

  6004

  Channel

  System

  Computer

  SatP850

  Security

  -

  EventData

  param1

  Application experience

  param2

  % 1053

  410065004C006F006F006B00750070005300760063000000

  Binary data:

  In the words

  0000: 00650041 006F004C 006B006F 00700075

  0008: 00760053 00000063

  In bytes

  0000: 41 00 65 00 4 00 6F 00 A.e.L.o.

  0008: 6F 00 6 b 00 75 00 70 00 o.k.u.p.

  0010: 53 00 76 00 63 00 00 00 S.v.c....

  I do not know...

  I've seen some say that they did not have this file, and simply adding the folder fixed their problems.   Look and see if the following folder exists, otherwise create a new folder;

  AUInstallAgent C:\Windows\

  May be also here;

  http://batcmd.com/Windows/8/services/alluserinstallagent/

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.

• Utility of fingerprinting Toshiba - "Failed to connect to the sensor.

  Having a problem with the Toshiba fingerprint utility. The program works fine until I try to use any sort of firewall/antivirus program, even the built-in Windows Firewall: S the scanner still works fine for the boot time scanning, as well as for windows logonm but as soon as any kind of firewall/antivurus software loads up, it fails to connect on the sensor. I added the program to the lists allow but still nothing... So far I tried with AVG Internet Security, Outpost Security Suite and by default, the Windows Firewall. Windows Firewall turned on for awhile, I got when I bought the laptop and there was no problem.

  It's a Qosmio X 500 - 00 X, it uses the same installation of windows when I bought...

  See you soon!

  Hello

  Please update the software of fingerprint. You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try a different firewall and AntiVirus. I have good experiences with AntiVir and Kaspersky Security Suite.