Satellite P205-S6267: error: 10-FC06-0002 and preinst3.swm and black screen

Similar Questions

• Output suitable for Satellite P205-S6267 cable available to connect to an HD Plasma TV?

  This is my first post. I'm not very well informed about computers.
  I have a laptop Toshiba Satellite P205-S6267 which according to the manual, is supposed to be able to read any DVD HD. I just bought a Samsung 50 "plasma TV model #PN50A400C2DXZA from Sears and it notes that a PC can be connected via a cable, but does not exactly what type of cable is needed.

  My question is: the Toshiba has a port "S-video (TV-out)", but the manual Samsung TV shows only two ports of entry that can be used to connect a PC: 1. a D - Sub cable with Audio output of the PC cable and 2. a HDMI/DVI cable with 3.5 mm stereo/2RCA cable.

  Can anyone suggest exactly what kind of cable I need to buy to connect the Toshiba PC to the Samsung TV to use the TV works like a PC monitor?

  If there is a cable that works, the TV shows PC output in high definition?
  Thank you
  Jim

  Hello Jim

  I tried searching in Google which TV you have exactly, but I didn't have success.
  Can you please post exact description of the TV model?

  In any case, all new TVs have several different ports on the back. In General, you can use most of them. The question is which ports on your laptop TV output.
  According to the specifications of the laptop, your laptop has an S-video output port. The same port should be available on TV also. If this isn't the case, you can use the S-Video/RCA cable. RCA yellow port must be available on your TV.

  With this single image of cable can be sent to the TV but no sound.
  High definition signal can be sent by HDMI cable only but your laptop hasn t this port.

  If you have any other questions please post again, or ask in the nearest electronic store. I don't know that they can show you all the cables and adapters, you can use to connect your Satellite to the new TV.

  Good luck!

• Satellite P205-S6267 - automatically stops down

  I'm on a Toshiba Satellite P205-S6267

  Recently, my laptop started trolling and then it just stops himself. I turned it on and it stops again after loading windows. After leaving my laptop alone for an hour, I turned it on and it makes works perfectly except that the laptop is quiet (no fan or whirring noise, usually my fan works from the outset it on). After half an hour, he stops again! I guess it has something to do with overheating now.

  After searching for similar problems, I've heard users get the radiator plug. Now I don't know if this is the problem, but I don't know my laptop is rather dusty and I have never cleaned the inside. Also, I have used for over a year. Do I get my laptop cleaned or is this something else. Also how much it should cost to clean/repair the radiator and the fan and dust?

  Hello

  I think that it s time to clean the laptop because you use over a year and I clean up my laptop every 2-3 months. I m always asked how much dust came out.

  But to clean the laptop you don t need a professional help. You can do it yourself using the jet of compressed air. This could blow out the dust from the cooling fans. So you don't have to disassemble the laptop and it only takes a few minutes. You can buy the jet of compressed air from each store to the computer normally.

• Chicony USB 2.0 camera does not work on Satellite P205-s6267

  Please help me!
  I bought a toshiba satellite p205-s6267
  everything works but the built-in webcam does not work, I tried many links and read many forums and have not found a solution.
  I tried to install all the drivers and it does not work
  If someone can give me a good driver or software for this, please help
  Thank you

  Hello

  give me your hand, I'll help you ;)

  Here, my friend, the link of all links that will guide you to the resolution (I hope so :))):

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  If it does then I really Don t know what...

  Welcome them

• Blue and black screen problem

  I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

  Thank you

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         You are able to boot to the desktop?

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

   

  Method 2:

   

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

   

  Method 3:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• Compaq presario beep and black screen

  Compaq presario sr5450 desktop stop with beep .the beepis on 17 seconds and off for 10 seconds. Ichanged power supplys but still the same beep and black screen

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  Here are the Codes of BIOS "beep" for an HP machine and the reasons why:

  "BIOS Beep Codes.

  http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c02222922&cc=us&destPage=document&LC=en&tmp_docname=c02222922

  See you soon.

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

• Disk error and black screen on Satellite c660-21z

  Hello

  MY SON HAS HAD HIS LAPTOP FOR 3 WEEKS.
  USED THIS MORNING, SHUT IT DOWN IN A NORMAL MANNER, WENT TO START TONIGHT AND GETS A BLACK SCREEN WITH "A DISK READ ERROR OCCURRED. PRESS CTRL + ALT + DELETE TO RESTART»

  I TRIED TO RESTART, TRIED BOOTING IN SAFE MODE, AND THEN RETURNED.

  SOMEONE HAS SUGGESTED EVEN TAKE OUT THE BATTERY AND PUT IT BACK BUT NOTHING SEEMS TO WORK.

  CAN ANY ONE HELP?

  Thank you

  Hello

  It looks like a problem with the HARD drive.
  Please check if the HARD drive is recognized in the BIOS. Switch on and press F2.
  Usually, this will help you access the BIOS.
  In the BIOS on the front page that the HARD drive should be mentioned is that?
  Otherwise, this means that the HARD drive is dead and must be replaced

  By the way: you did not post the laptop model but if it s 3 weeks old, then you must get in touch with Toshiba service, if the HARD disk is defective you should get a new one for free because the warranty to be valid.

• Satellite L775D-107 is not starting and black screen

  Hey
  I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
  Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

  I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
  .
  Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

  I've got very important documents in United on this laptop, so I hope you can help me.

  Thank you in advance.

  Hey

  My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

  Sombody bnows so this can't be helped?

  Mike

• Satellite C650 - stuck with the underscore and black screen boot

  Model: satellite C650

  Operating system: windows 7 Home premium

  Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

  Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

  Any help would be appreciated.
  Thank you

  Good news.
  Thanks for the comments.

• Satellite L500 - flicker and black screen turns green

  Toshiba Satellite L500-screen color problem; White and black green turn turn pink. When the laptop is turned on after a while, the screen back to normal, but just for a second. Then he turns his back to the Green and Pink for black and white color again. The display also flashes.

  Anyone, please help me.

  Hello

  Theoretically the two parties may be affected: Notebok display or graphic card itself.

  Way simpler to check that connects to an external monitor. If the external monitor is ok, the graphics card is affected. Otherwise, the screen of the laptop must be exchanged.

  Is your laptop still under warranty?

• HP elite e9160f had compatible windows error/process stop notice and blue screen freezes.

  HP e9160f Vista Home Premium running is compatible notice of error switch Windows and blue screen freezes.  Any suggestions?

  I went ahead and ran the HP disks to reset to the factory settings and loaded Windows 7.  No problems now!  Thank you for your help and persistence.

• Satellite A200 - 1 M 4 do not start and black screen

  I really hope that someone can help you.
  After 15 months my Toshiba A200 seems to have given up the ghost.

  I tried to put it on today and although the blue LED on hold came and the orange clear hard disk there was no other sign of life.
  I tried and tried, but it just wouldn't start and the screen did nothing but remains black.
  I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  I have no memory material inserted or additional cards as a webcam. Everything worked fine until now.

  I'm not very technical so you know how to help, then please explain as simply as possible.

  I really appreciate any help you may be able to offer!

  > I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  Why try to press F4?
  However, remove the battery, disconnect the AC adapter, wait up to an hour and then reconnect the battery and the AC adapter.

  If the laptop doesn t boot I think that the motherboard must be replaced. Ask your local ASP for help. They can order and swap the motherboard.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Satellite L30-101 - Vista will not start all I get a black screen

  Hey can any help me please I have a toshiba satellite l30-101 (PSL33E) with windows vista basic hoe

  I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

  Ive triyed al the keys F and all the FN keys to bu that nothing would happen that also, I tried an external monitor and the same thing I got nothing on the monitor is a black screen then when I disconnected the mnitor a blue box would come on the screen saying no video input please attatch cable

  allsoo ive tried running the recovery disc, I put the cd in the CD-ROM drive would begins to spin, but nothing would happen that I tried all the F keys while the disc was running, but still nothing would happen

  could sumone if you please help me

  Post edited by: garethg83

  > I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

  I m afraid the BIOS update has no procedure and therefore the ROM chip has not updated as it should. This is the reason why the laptop can not start correctly.

  I think that it of necessary to reflash the ROM BIOS module Once again, but this can be done only using a procedure of BIOS of crisis.
  As far as I know this can be done only through ASP because there is no traditional BIOS version by download.