Compaq presario beep and black screen

Similar Questions

• ASUS GeForce GTX 750TI install on Pavilion P6 2010UK leads to 3 beeps and black screen

  Hello

  I recently tried to install a 750TI Asus GeForce GTX on my HP Pavilion P6 2010UK using a SATA 6-pin PCI Express power connector, but after starting I get three beeps and a black screen. Can someone help me with this please?

  As an observation, the PC was working fine before you install the new card.

  Hello

  Many of the graphics cards NVIDIA GTX 750 will not work in the HP PC that do not have a BIOS version 8.  Your PC has a BIOS version 7 and I do not expect HP to publish a version 8 BIOS for your PC.

  Return the card and try one of the models that should run on a PC equipped with a legacy BIOS.

  MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF

• Compaq Presario CQ61 - 319WM: black screen

  It's laptop from a friend so I don't know much.  When I hit the power button, I hear that the machine is turned on, but the screen remains black without any indication that it is on.  I've connected to an external monitor (work) & does not show anything on anyone.  I out the battery & did a "hard" reset... for nothing doesn't.  I checked to make sure that the hard drive & RAM were sitting safely.  Where should I go from here?

  Hello

  > could please turn off the computer

  > and keep tapping the F2 and restart the compuetr will need you screen HPSA

  > try to do a test of the system

  > If your unable to enter this screen

  > then there is a problem with the video card

  I work on behalf of HP
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.
  Click the right to say 'Thank you' for helping on Bravo 'Thumbs Up'!

• Blue and black screen problem

  I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

  Thank you

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         You are able to boot to the desktop?

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

   

  Method 2:

   

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

   

  Method 3:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

• Equium P300-16 t BSOD and black screen after the removal of GPU

  I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

  When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

  After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

  Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

  BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
  I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

  I have no other way for you to control the affected parties? How?
  I guess you need a help from a technician who would be able to analyze the material for potential problems.

• Satellite C650 - stuck with the underscore and black screen boot

  Model: satellite C650

  Operating system: windows 7 Home premium

  Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

  Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

  Any help would be appreciated.
  Thank you

  Good news.
  Thanks for the comments.

• Compaq Presario C700 CTO - blue screen drivers/events/mode RAID or AHCI?

  Hello

  I need to know if my PC Compaq Presario C700 CTO Notebook is running in RAID or AHCI mode because of problems with a driver Intel Matrix Storage Manager (IMSM).  The Read Me text file in the menu start > all programs > intel Matrix Storage Manager folder said if my system works in RAID or AHCI mode determines if my computer needs this driver.

  For the past month, my computer stops and restarts with a blue screen and message when the desktop appears as a message. (The blue screen does not last long enough to read.)  The message is always the same except one I had yesterday which is described at the end of this post.

  "Windows has stopped unexpectedly. '.  The details are:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\Mini062513-01.dmp
  C:\Users\Dawna\AppData\Local\Temp\WER-48001-0.SysData.XML
  C:\Users\Dawna\AppData\Local\Temp\WERE54F.tmp.version.txt

  A solution:

  Problem with the Intel IMSM driver.

  Intel IMSM driver has stopped working properly.

  Press or click on to download the update on the site of ASUS computer.

  I several times installed upgrading after the blue screen event ever.  The download is an application called V8.9.2.1002_logo_Win7Vista3264.exe.

  The Intel Matrix Storage Manager driver is not in the list of devices in Device Manager > show hidden devices.  I found information on the HP site indicating how do I know if my computer has the driver, because I thought that maybe it has not been installed correctly.  I found the Intel Matrix Storage Manager program folder in the start menu > new programs.  I can't know what version it is.  Reading tells Me to text file in the folder to open the Device Manager and search for specific controllers SATA RAID and SATA AHCI controllers.  If not in the list then it appears that my OS is not running in two modes.  I can't find these devices in the list, but the Read Me text file advises me to contact the manufacturer in case of doubt.  My warranty has expired, so I'm here asking for help.

  When I use the HP product detection analysis to try to automatically scan for driver updates, it reads my product incorrectly.   Running the tool has sometimes followed by a crash and blue screen.

  I do not remember the changes that I made at the time when the events of the blue screen started to happen.  There was an event yesterday blue screen and the message on the desk said a problem with the HP Recovery Manager and backup.   He advised me to install an update from the HP website.  The link did not open so I downloaded the version 4.0.100.1189sp39296.exe of HP update.  I've also updated my graphics driver.

  I would be grateful if someone could help me solve this problem.   I'm worried about damaging my computer.

  Dawna

  HP Compaq Presario C700 CTO Notebook PC
  OS 32-bit of Windows Vista Home Premium Service Pack 2
  x-86 based PC
  SM BIOS version 2.4
  Physical memory (RAM) installed 2.00 GB
  Total physical memory 1.99 GB
  866 MB available physical memory
  4.22 GB total virtual memory
  2.69 GB available virtual memory
  Page file 2.28 GB of space

  Hello:

  First of all your needs from laptop to have the hardware (CPU and chipset) Intel to run the Intel Matrix Storage Manager.

  Your C700 CTO may have either hardware Intel or an AMD/Nvidia chipset so I can't tell you what your laptop has.

  You can tell however, and you can tell what mode of the controller to your PC is currently running (AHCI or RAID).

  If you have PC, go into the Device Manager and if you have a category of an ATA/ATAPI IDE controller based on an Intel processor, click to expand that and if your laptop is running in AHCI mode, the controller will have the AHCI word in the description of the controller.

  If your mobile phone is set to RAID (which I doubt), scroll down further on the Device Manager list, and there would be a category of storage controllers if the command is set to RAID.

  Click to expand, and you would see a description of disk with the word inside RAID controller.

• Envy 17-j130ea: HP Envy 17-j130ea do not have access to the BIOS recovery and black screen

  Hi people,

  The laptop was waking up alone, so I decided to try to update the BIOS. Bis error. The tool has been run on 64 Win10

  The HP tool left me with a black screen and after that I tried to hold the low win + B and the power to access the Bios recovery, but there is no nothing. Tone flashing, nothing.

  I don't know if creating a flash drive with the bios will help as I don't have admin rights in another machine to create the flash drive using HP tool.

  Any ideas? Flash player won't work if BIOS recovery is not pulled up?

  All ideas are welcome.

  See you soon

  Well, I managed to solve the problem overnight without having to wait three days for anyone to answer that after the end of the week, with the following steps:

  1. I had to create a USB key with the bios by using the executable auto HP. It did not help that for some reason any that you have to have the administrator rights on a windows machine. Why aren't files available as well in a simple zip file? It would have helped a lot! Please stop HP right now provide only Autorun... it only compliates things. It took me an extra day just because I couldn't access a machine windows with administrator rights to install the executable file.

  2 - Insert the memory stick with the bios in the dead computer.

  3 - Press the Win + B and press the power button. The machine didn't do any beep or noise that all the guides say. I just kept pressing the key B + Win until I saw a recovery of the Bios screen, finally. Without the memory following stick this same step has not shown, nor does the computer make a noise or show any display, just died.

  4 - wait for the update at the end.

  My Advisor. Do not update windows, it all messed up. It is very reliable to get the memory stick. Too many windows things can interfere in the process, just don't do it from Windows, or at least create the memory stick first while you still can.

• my iphone 4S hanged and black screen

  I used the iPhone 4 (factory unlocked) for over a year now with only minor problems. Like a regular day, I was typing a message to my friend, but suddenly he hung then black screen follows... It was a shock suddenly! . I just put the phone to rest for a while and after about an hour, have crossed my fingers and tried again the Home button, but the black screen continued. If the backlight of the iPhone works I can say that, because I see the phone luminates but the "Slide to unlock" is cannot be seen. Since I have been using the phone for a while, I know the accurate position to "Slide to unlock" so if I slip my finger unlocks it too with the default 'Unlock (click) noise' but again once the icons of the apps is not visible, all I see is a grid and fadely. I get the SMS and calls even though I can't read nor I can see who's calling. Because the screen is blank, I can't use the phone but the phone seems to work.

  Try a hard reset by pressing Power and "home" set button until the Apple logo appears. If it is not resolved, try a restore of the phone via ITunes.

• No start tone and black screen on G5

  Kernal panic, stop G5.

  Market - no start-up tone; black screen; no answer.

  Fans have started.

  Any ideas?

  Have you tried the PRAM reset? Press and hold the Command-Option-P-R keys. Hold the keys down until the computer restarts and you hear the tone of starting for the second time.

• Equium A60-155 - no disk activity HARD and black screen

  Hello

  I reinstalled just WXP on the cell above and everything was fine until I downloaded and installed the site pc diagnostic tool. Restarting the laptop but there is no HARD drive activity and the screen was black after a few minutes it turns off.

  If I insert the Windows XP Home edition CD, and restart the CD turns upward but still a blank screen and no HARD drive, all activity ideas!

  > I reinstalled just WXP on the cell above and everything was fine until I downloaded and installed the site pc diagnostic tool. Restarting the laptop but there is no HARD drive activity and the screen was black after a few minutes it turns off.

  To me it seems very strange that the laptop is dead after the installation of the diagnostic tool. I think that it s only a setback.

  If you are not able to boot from the CD and the laptop doesn't display anything on the screen, then it looks like a serious hardware problem.

  Maybe the motherboard, CPU, or memory modules are dead.
  It's really not easy to tell what's exactly wrong

  I think it s time for an ASP.

  See you soon

• Reboot and black screen

  Three or four times a day, I get a black screen and restart my computer.  This makes it especially when I'm home, but today it also is at work on a more sophisticated network.  Any suggestions?

  What year MBP and what operating system are you running? If you were to go to newspapers system and post a screen shot of the most recent stop who could help. In the meantime, try this. http://Reinout.vanrees.org/weblog/2015/01/06/MacBook-Pro-black-screen.htm

• G62t-250 power light lights up but no noise of fan and black screen

  I bought my mother a computer laptop hp G62t-250 in 2010. When I turn on the laptop, following happens:

  1. power is turned on

  2. the CAPS button is on

  3 WiFi light is orange.

  4. NO fan or other sounds.

  5. black screen.

  What is the problem here? and suggestions to fix.

  Thank you.

  If you are not able to make your screen lights up after doing hard reset & bios restore, then this is definitely a hardware issue that must be like.
  But restore BIOS should do several times to make it successful.
  No other way that I am able to suggest other than these if the power appears on the screen.
  Since no fan or spin is heard & screen is true black, I suggest that the chances are slim to get a troubleshooting.
  
  Try and if it is not
  Give it to get it repaired. Contact HP in your area.
  
  Thank you

• Satellite A200 - 1 M 4 do not start and black screen

  I really hope that someone can help you.
  After 15 months my Toshiba A200 seems to have given up the ghost.

  I tried to put it on today and although the blue LED on hold came and the orange clear hard disk there was no other sign of life.
  I tried and tried, but it just wouldn't start and the screen did nothing but remains black.
  I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  I have no memory material inserted or additional cards as a webcam. Everything worked fine until now.

  I'm not very technical so you know how to help, then please explain as simply as possible.

  I really appreciate any help you may be able to offer!

  > I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  Why try to press F4?
  However, remove the battery, disconnect the AC adapter, wait up to an hour and then reconnect the battery and the AC adapter.

  If the laptop doesn t boot I think that the motherboard must be replaced. Ask your local ASP for help. They can order and swap the motherboard.