Satellite P30-110: colored screen lines

Similar Questions

• Satellite P30-110: this screen corresponds to my laptop?

  Hello

  I need a new LCD and I found one on ebay. Can you please tell me if it is good? I want to make sure, before I buy it. Can you please tell me if the specs of this screen correspond to my laptop?

  Thank you

  Kind regards

  Links

  9QQrdZ1QQssPageNameZWD1VQQcmdZViewItem http://CGI.eBay.com/New-17-WXGA-Glossy-LCD-Screen-for-Toshiba-P30-S6362_W0QQitemZ150063671890QQihZ005QQcategoryZ4218

  Hello

  I think that this screen will correspond with your laptop.
  The design of models P30 must be identical.

  Good bye

• Satellite P30-110: the screen is blank, after working for a few minutes

  Hello.

  Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.

  I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.

  Any adviser who can offer are welcome. If you need more information about the problem please let me know.

  Thank you very much

  Hi Paul,.

  If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.

  I suggest that you only contact your nearest ASP for further diagnosis.

  Kind regards

• Help please: error 0x0000007e Stop when starting up on top of Satellite P30 110

  Hello

  I wonder if someone can please help me with a recurring error message I get randomly when starting up. I have a satellite P30-110, with WXP Home SP2 installed. Mobile P4 3.2Ghz processor, 512 RAM, ATI mobility Radeon 9600/9700 series.

  Turns off the computer as usual last night. He walks this morning and think that it load the bios OK and then got the black background with Win XP, and then think about this error page came. Has a blue background with the following text:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X00000000, 0XF891D384, 0XF891D080).

  I turned the computer off, then restarted when prompted chose to start windows normally, and it seems to start up fine.

  Any ideas?
  Thanks for your help.

  Hello

  If this is the first time, you've seen this error, I'm not too concerned about it. There are not too many people who have not encountered this scenario occasionally.

  The time to worry, if it happens regularly, as this may indicate a component defective that will need to be diagnosed later.

  On this occasion, I suspect that the start process has detected an anomaly any (possibly a play on hard drive control) and rather than allow Windows to continue it stopped with the error on blue screen.

  Kind regards

• Satellite P30 110: what power?

  I need to replace the power supply for my Satellite P30-110.

  The main web site search gives three options: PA3336E-1ACA, PA3381E-1ACA, and PA3290E-2ACA (e = 1 http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = UK & selSeries & selFamily = 2326 & SelCategorie = 2319 & family = 2326 & product = 98796 selP)

  PA3381E-1ACA seems more to be available and PA3290E-2ACA has this note: "this adapter is a DC-in smaller form than part number PA3290U-1ACA-PA3290U-2ACA and PA3290U-1ACA are not interchangeable."

  My CD original, now broken, food seems to be the model of PA3381E-1ACA unabvailable.

  Anyone know who the other two power supplies is the correct replacement?
  Or can anyone suggest a market after feeding, which will be held on the car, air and entry to provide the right output (19v 6. 3A).

  Hello

  Satellite P30-109 has PA3290U-1ACA adapter 100-240V AC 50 - 60 Hz 120W with 19V DC output. AFAIK all laptop P30 use the same adapter. Check the part number on the Toshiba page.

• Satellite P30-110: how to open the machine for the cleaning of the fan?

  Hello

  I'm having problems with my Satellite P30 - 110 overheating and turn off during routine tasks. I need to clean the fans and did it with compressed air. But I really want to get to the fans and clean them unobstructed. Is there a visual guide on how to open it?

  I removed the screws that are visible, but it will not always be open. Don't want to force it.

  Thanks in advance

  Hi Charlie,

  The following URL can be useful to you in your P30 dismantling: -.

  http://www.irisvista.com/tech/laptops/ToshibaP30/SatelliteP30_disassemble_laptop_1.htm

  Kind regards

• Satellite P30-110: power supply keeps failing

  I have a Satellite P30-110, which has a strange problem with power. S battery get now, and I mainly use it on sector. The difficulty is that food keeps dropping out. Have disconnected and reconnected in the power cable to the rear are not working.

  I have to shut down the computer, unplug and plug back the power only, and restart the computer. Frequently, power falls again by restarting it's laptop computer, and I have to repeat the whole process often several times. Worse still, the s question arising more and more frequently. It s driving me crazy. So, any help would be appreciated.

  Post edited by: johnbeasley

  Hello John

  I think this problem should be properly verified by the service partner. On this path, it is not easy to give an accurate diagnosis. To correctly power AC power adapter, power on the laptop power and power electronic housing must work well. If a place is defective, you can expect problems.

  In my opinion, the unit should be checked by technicians.

• Satellite P30 - 133 - internal screen is empty

  Hello everyone.

  I have a satellite P30-133 with a white screen, everything works fine.

  When I plug it into my computer screen but the laptop screen remains empty, any ideas?

  Thanks in advance. Steve.

  Hello!

  Press FN + F5 to switch between monitors.
  Check if you have the same problem on startup and in the BIOS.

  In the worst cases, you should go to a local ASP. Technicians must check your parts for laptop and trade if it of necessary.

  Good bye

• Satellite P30 - after cleaning screen stops working

  Hi guys,.

  I have a Satellite p30.

  I opened the computer to clean... as she held off on switching.

  I cleaned and were back together... the screen is not displayed.

  I took apart checked all connections... so good...

  the computer loads and this sound, etc...

  just no display

  I tried fn - f5 nothing... any suggestions?

  Khalid

  Hi Khalid,

  I know not just how mush disassembling do you clean your P30, but it is possible that you have dislodged the attacing of ribbon cable connector that you post for the motherboard. I suggest you check that this connection is still intact.

  Kind regards

• Satellite P30-110: vertical lines on the screen - Virus?

  I have a 110 - p30 and emerged recently vertical on my screen I have run norton AV and nothing was found is a possible virus any help appreciated because I don't want to lose all my work.

  Hi Dave

  If you don't want to lose your work trial to save on a way you like it (data CD/DVD or copy files on the external HARD disk device).

  I don't really know if the vertical lines are the result of some viruses, but I believe some hardware malfunction can be responsible for this. Just detailed test can give more answers. In your case the best solution is to backup all important data and preinstall the device with the recovery media. On this way the unit will be own pre-installed and you can check if the lines happen.

  If so, there are certainly a hardware problem. Sorry, but in this way it is not easy to give you more answers. Please back up your data. If the problem will be much worse than what you have a big problem.

• Satellite L300D-110 - white screen and continue to restart

  Hello

  I have a L300-110, this just started to happen when I turn on the laptop light power green lights then get white screen but if continue to restart the laptop starts to work again.

  Can anyone help?

  Hi thm1ele,

  You can access the BIOS or see something on an external monitor?

• Satellite P30 - 110 and new memory

  I just bought a 1 GB memory module to fit into my laptop, but when I put and start the laptop to a blue screen appears and tells me there is a problem with one of the graphics card drivers and then the computer restarts continually.
  I updated the BIOS and the ' display readers on the Toshiba site and changed the virtual memory settings, then tried again and now it is continually restarts as before or will start as normal and open windows but will be very, very slow and not all the graphics will be displayed on the screen, (for example the text saying 'start' in the task bar is not there some parts of windows are blacked out) (, and the boxes around these buttons under the name 'ok' and ' Cancel do not appear.)

  I've tried everything I can think of and nothing works well if I remove the new memory and just leave the old 512 MB module in weather. I checked the memory and it is of the correct type, there is someone out there who has experienced similar problems or who knows how to fix this, please?

  Hello

  If you are 100% sure that this new module memory is responsible for your problems I recommend ordering a new module of RAM from Toshiba or Kingston. The module are tested and they should work fine.

  Compatible modules for your unit are:
  512 MB (PA3312U - 1 M 51)
  1024 MB (PA3313U-1M1G)

  Good bye

• Issue of satellite P30 110 memory

  My P30-100 starts to run a bit lazy now, so I thought to give him a Christmas present early and buy a couple of Modules of memory 1 GB for it.

  Will this work in my laptop?

  http://www.ebuyer.com/customer/products/index.html?RB=11831504500&action=c2hvd19wcm9kdWN0X 292ZXJ2aWV3 & product_uid = 65739

  .. as it is quite a bit cheaper, then most of the other memory, I found.

  Thanks in advance.

  Hello

  Yes, you can use this memory module. AFAIK you laptop has two slots and it loads Max 2048 MB of RAM (2x1024Mo)
  But you know. Modules of memory without name are chipper, then another, but they are not so effective as another modules of memory, for example modules from Kingston.

  Good bye

• Satellite P30 - 110 error

  The computer always hang when I open Web pages and sometimes even blue.
  It is said:
  Stop: 0x0000008E (0xC0000005, 0xF86791C8, 0xEEFED7E8, 0x00000000)
  SKNWF.sys address F86791C8 base at F8676000 DataStamp 3bd673a6
  Dump of physical memory Begin
  Complete physical memory dump.

  I have completed all of the updates of Windows XP and reinstall my computer several times. However, it does not always work. I wonder if it's the problem of equipment.

  Hey there,

  If you get
  "Beginning Dump of physical memory
  Message memory full dump physics. "who is to say that the hard drive has failed on the laptop. The device must be repaired by an ASP.

  See you soon

• Satellite P30-110: need help assembling

  My laptop has been automatically close recently while playing games. It is not when it is new and I persume it fell to overheating.

  In reading other posts, it seems that it could do with a good cleaning and dusting. I tried opening the thing, but I meet a lot of difficulties. I remove all visible screws (including those under the hard drive) and the upper section loosens around the edges, but I get enough to get the top bit off, it's as if there is something to capture. Of course, I don't want to force it.

  I also deleted the DVD player.

  Any help is greatly appreciated!

  Hi Charlie,

  Do not disassemble your laptop, why not just suck any dust in the same way that he got through the aspiration air grills?

  It might just solve your problem and don't risk damage anything physically during the process.

  HTH