Satellite P30 110: what power?

Similar Questions

• Satellite P30-110: power supply keeps failing

  I have a Satellite P30-110, which has a strange problem with power. S battery get now, and I mainly use it on sector. The difficulty is that food keeps dropping out. Have disconnected and reconnected in the power cable to the rear are not working.

  I have to shut down the computer, unplug and plug back the power only, and restart the computer. Frequently, power falls again by restarting it's laptop computer, and I have to repeat the whole process often several times. Worse still, the s question arising more and more frequently. It s driving me crazy. So, any help would be appreciated.

  Post edited by: johnbeasley

  Hello John

  I think this problem should be properly verified by the service partner. On this path, it is not easy to give an accurate diagnosis. To correctly power AC power adapter, power on the laptop power and power electronic housing must work well. If a place is defective, you can expect problems.

  In my opinion, the unit should be checked by technicians.

• Satellite P30-110: how to open the machine for the cleaning of the fan?

  Hello

  I'm having problems with my Satellite P30 - 110 overheating and turn off during routine tasks. I need to clean the fans and did it with compressed air. But I really want to get to the fans and clean them unobstructed. Is there a visual guide on how to open it?

  I removed the screws that are visible, but it will not always be open. Don't want to force it.

  Thanks in advance

  Hi Charlie,

  The following URL can be useful to you in your P30 dismantling: -.

  http://www.irisvista.com/tech/laptops/ToshibaP30/SatelliteP30_disassemble_laptop_1.htm

  Kind regards

• Help please: error 0x0000007e Stop when starting up on top of Satellite P30 110

  Hello

  I wonder if someone can please help me with a recurring error message I get randomly when starting up. I have a satellite P30-110, with WXP Home SP2 installed. Mobile P4 3.2Ghz processor, 512 RAM, ATI mobility Radeon 9600/9700 series.

  Turns off the computer as usual last night. He walks this morning and think that it load the bios OK and then got the black background with Win XP, and then think about this error page came. Has a blue background with the following text:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X00000000, 0XF891D384, 0XF891D080).

  I turned the computer off, then restarted when prompted chose to start windows normally, and it seems to start up fine.

  Any ideas?
  Thanks for your help.

  Hello

  If this is the first time, you've seen this error, I'm not too concerned about it. There are not too many people who have not encountered this scenario occasionally.

  The time to worry, if it happens regularly, as this may indicate a component defective that will need to be diagnosed later.

  On this occasion, I suspect that the start process has detected an anomaly any (possibly a play on hard drive control) and rather than allow Windows to continue it stopped with the error on blue screen.

  Kind regards

• Satellite P30-110: vertical lines on the screen - Virus?

  I have a 110 - p30 and emerged recently vertical on my screen I have run norton AV and nothing was found is a possible virus any help appreciated because I don't want to lose all my work.

  Hi Dave

  If you don't want to lose your work trial to save on a way you like it (data CD/DVD or copy files on the external HARD disk device).

  I don't really know if the vertical lines are the result of some viruses, but I believe some hardware malfunction can be responsible for this. Just detailed test can give more answers. In your case the best solution is to backup all important data and preinstall the device with the recovery media. On this way the unit will be own pre-installed and you can check if the lines happen.

  If so, there are certainly a hardware problem. Sorry, but in this way it is not easy to give you more answers. Please back up your data. If the problem will be much worse than what you have a big problem.

• Satellite M65-9092 - what power?

  Hello

  I have a friend who bought the M65-9092 in the United States.
  He arrived in Germany and its power supply is broken.
  For the moment there Part No. Number PA3432V-1ACA PA-1750-04 model, but we can not find it here. That is we have to buy in Germany?
  Hotline of Toshiba could not help that they have lists of foreign models.

  Thank you!

  Hello

  I think that you have entered the name of the adapter.
  It of a * PA3432U-1ACA * and not PA3432V-1ACA

  PA3432U-1ACA supports the following specifications:
  * 19V, 3. 95A, 75W *.

  You need a power adapter that provides 19V.
  The value of the intensity must be the same or a little more but not lower

  However, I think that you will find this AC if you would google for PA3432U-1ACA.

  PS: you can take a designed adapter for Sat M60 (European series) too.

• Satellite P30-128: installation power management error Code: 0x7E

  Hello, I formatted my laptop yesterday, and I could not install power management software correctly. When the installation is complete, I get "fatal error. Program will be closed. "Code: 0x7E.

  Can someone help me please?

  Hi Simone

  In this forum, you will find many topics on this energy-saving error. Try using the advanced search.
  This product usually mistake it the user does not use the Toshiba Recovery CD but only the original Microsoft OS.
  But according to other topics, there is no explicit solution.
  It is very important that you need to install the drivers of Toshiba in the right order.
  See the installation instructions on the page of the Toshiba driver.

• Satellite P30-110: this screen corresponds to my laptop?

  Hello

  I need a new LCD and I found one on ebay. Can you please tell me if it is good? I want to make sure, before I buy it. Can you please tell me if the specs of this screen correspond to my laptop?

  Thank you

  Kind regards

  Links

  9QQrdZ1QQssPageNameZWD1VQQcmdZViewItem http://CGI.eBay.com/New-17-WXGA-Glossy-LCD-Screen-for-Toshiba-P30-S6362_W0QQitemZ150063671890QQihZ005QQcategoryZ4218

  Hello

  I think that this screen will correspond with your laptop.
  The design of models P30 must be identical.

  Good bye

• Satellite P30-110: the screen is blank, after working for a few minutes

  Hello.

  Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.

  I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.

  Any adviser who can offer are welcome. If you need more information about the problem please let me know.

  Thank you very much

  Hi Paul,.

  If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.

  I suggest that you only contact your nearest ASP for further diagnosis.

  Kind regards

• Issue of satellite P30 110 memory

  My P30-100 starts to run a bit lazy now, so I thought to give him a Christmas present early and buy a couple of Modules of memory 1 GB for it.

  Will this work in my laptop?

  http://www.ebuyer.com/customer/products/index.html?RB=11831504500&action=c2hvd19wcm9kdWN0X 292ZXJ2aWV3 & product_uid = 65739

  .. as it is quite a bit cheaper, then most of the other memory, I found.

  Thanks in advance.

  Hello

  Yes, you can use this memory module. AFAIK you laptop has two slots and it loads Max 2048 MB of RAM (2x1024Mo)
  But you know. Modules of memory without name are chipper, then another, but they are not so effective as another modules of memory, for example modules from Kingston.

  Good bye

• Satellite P30-110: colored screen lines

  Hello

  I have a big problem with my laptop. There are thin lines, thickness, colors on my screen and some of them disappears when I turn it on. My warranty expired about 7 months ago and I was wondering if I still have the right to extend my warranty for this laptop? Once it is extended, if no repair is required they will do it again for free?

  Thank you for your help

  Hello

  I put t think that your can save the laptop for the extended warranty.
  In my view, the standard warranty must be valid if you want to extend the warranty.
  But I think that the service point in your country can give you more details about the warranty policy.

  But the lines also appear on the external monitor?

• Satellite P30 - 110 error

  The computer always hang when I open Web pages and sometimes even blue.
  It is said:
  Stop: 0x0000008E (0xC0000005, 0xF86791C8, 0xEEFED7E8, 0x00000000)
  SKNWF.sys address F86791C8 base at F8676000 DataStamp 3bd673a6
  Dump of physical memory Begin
  Complete physical memory dump.

  I have completed all of the updates of Windows XP and reinstall my computer several times. However, it does not always work. I wonder if it's the problem of equipment.

  Hey there,

  If you get
  "Beginning Dump of physical memory
  Message memory full dump physics. "who is to say that the hard drive has failed on the laptop. The device must be repaired by an ASP.

  See you soon

• Satellite P30 - 110 and new memory

  I just bought a 1 GB memory module to fit into my laptop, but when I put and start the laptop to a blue screen appears and tells me there is a problem with one of the graphics card drivers and then the computer restarts continually.
  I updated the BIOS and the ' display readers on the Toshiba site and changed the virtual memory settings, then tried again and now it is continually restarts as before or will start as normal and open windows but will be very, very slow and not all the graphics will be displayed on the screen, (for example the text saying 'start' in the task bar is not there some parts of windows are blacked out) (, and the boxes around these buttons under the name 'ok' and ' Cancel do not appear.)

  I've tried everything I can think of and nothing works well if I remove the new memory and just leave the old 512 MB module in weather. I checked the memory and it is of the correct type, there is someone out there who has experienced similar problems or who knows how to fix this, please?

  Hello

  If you are 100% sure that this new module memory is responsible for your problems I recommend ordering a new module of RAM from Toshiba or Kingston. The module are tested and they should work fine.

  Compatible modules for your unit are:
  512 MB (PA3312U - 1 M 51)
  1024 MB (PA3313U-1M1G)

  Good bye

• Satellite P30-110: need help assembling

  My laptop has been automatically close recently while playing games. It is not when it is new and I persume it fell to overheating.

  In reading other posts, it seems that it could do with a good cleaning and dusting. I tried opening the thing, but I meet a lot of difficulties. I remove all visible screws (including those under the hard drive) and the upper section loosens around the edges, but I get enough to get the top bit off, it's as if there is something to capture. Of course, I don't want to force it.

  I also deleted the DVD player.

  Any help is greatly appreciated!

  Hi Charlie,

  Do not disassemble your laptop, why not just suck any dust in the same way that he got through the aspiration air grills?

  It might just solve your problem and don't risk damage anything physically during the process.

  HTH

• Satellite P30-DVD Ram

  Hello I have a satellite p30-110 which has xp pro on it I am writing on DVDs and have updated the driver from your site and the dvdram software, I checked the box in the properties that allows the cdr so I can write DVDs but when I try to format a blank using dvdform dvd it says blank dvd is notsupported media.

  I use version 1.1/2 x review Spped DVD - RW 1.0 that allows from 1 x to 2 x 4.7 gb data disks for registration are the right - drive says it's one my * a dvdram uj-820 s. could you please help

  -Please email - [email protected]

  Hello

  one of my friends uses his P30 also with XP Pro and WinDVD software to bury.

  It works very well!

  Tried other burning software yet?

  Goodbye Chris