Satellite P300 - 1GI (PSPCCE) what happens with Vista after installing Win 7?

Similar Questions

• Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

  Hello there;

  I use for my laptop Satellite P300-219 (PSPCCE) newly bought about a week now. When you type I can't help noticing, the place where I put my left hand, I want to say the empty space to the left of the touchpad, feels much too hot. I looked for the manual and I have learned that it is where the CPU.

  Then I searched for a way to measure the heat of CPU, and after having tested some programs with too many different measures, I led to believe that the 'CPUID hardware Manager"gives the best results, after you set the correct value TJUNCTION.

  Here are the steps I get today while typing this message:

  ACPI hardware monitor
  Temperature 0 45note ° C (112 ° F) [0xC6E] (THRM)

  Intel Mobile Core 2 Duo T6400 hardware monitor
  Temperature 0 56a ° C (° F 132a) 0 x [31] (Core #0)
  Temperature 1 54a ° C (° F 129a) 0 x [33] (Core #1).

  Monitor hardware ATI Mobility Radeon HD 3650
  53A temperature 0 ° C (° F 127a) (GPU Core)

  Hardware Hitachi HTS543232L9S monitor
  Temperature 0 37â? Â ° C (98A? Â ° F) (0 x 25) (Assembly)

  From now you mind, windows taskbar indicates that I use roughly about 15 & 35% CPU. After a little use, I even though the CPU heats by a maximum of 69a ° C.

  The truth is, I don't know what to do with these readings, is my laptop which works very well, or he has problems? Could someone please tell me what should be the optimal level of heat for a P300, or where I can learn?

  Thanks in advance.

  Hello

  In my opinion, everything is ok with your laptop, buddy and the temperatures are quite good. Don t be to worry about this!
  If your laptop could overheat, it would have to close or freeze immediately. If this isn't the case, everything is ok with the temperatures.

  What you can do is to change the cooling method in Windows power management. Here, you change between performance and battery optimized cooling.

  By the way: you should also clean your laptop at any time. I clean my laptop every 3-4 months using a jet of compressed air. This blows the dust from the cooling fans.

  Welcome them

• Can satellite A300d-16W - I use HARD drive recovery after installing Win XP?

  I formatted my PC and installed XP. Can I reinstall Vista using HARD drive recovery?

  > I formatted my PC and install XP

  No, you cannot use the recovery HARD drive after installing Win XP because looks like you have formatted the HARD drive and the HARD disk partition has been erased.

  So you need to use the Toshiba Recovery disk that I hope, you created before you formatted the HARD drive.

  Greetings

• Satellite P300 - not more than internet with Vista

  Hello

  I have a big problem since a few days on my P300 with Vista. I can't connect to the internet. I have not install anything and I don't surf in dangerous sites so I don't understand what that append. I don't know if an automatic release of windows or antivir can do to this problem.

  I have antivir and firewall of the window. I unplugged everything, but it still does not. I have a disc whith linux external. I boot top and internet is ok. If the modem and network card good work.

  On vista, I have reset tcp/ip and windsock, but it's still bad. I initialize the registry with a PATCH and it's the same thing.

  So I don't know what to do now.

  If someone knows this problem please help me.

  Hello

  First of all we should talk; How you want to connect to the internet.
  Have you tried a LAN or WLan connection?

  Have you checked your router settings?

• Satellite P300 - player of the Partition with Vista

  Hello.

  I bought a P300-PSPC4C-SE308C demo, and it has installed Vista. I want to downgrade to XP. The drive is 300 GB and is distributed as a single drive. I would like to partition a drive C: and D:. I went into the BIOS and changed the AHCI on the 'compatibility' mode, if I understand correctly that he need to change than the AHCI setting, so that the laptop to 'see' XP. Now, I need to partition and format the drive. At first, I tried to install my Partition Magic 8, but it does not work with Vista. I tried to use "fdisk" to boot Windows 98 drive program, and he acknowledged only the reader as 49GB.

  I need to know how to partition and format the drive and then install my XP. Any and all help would be appreciated.

  Thank you very much... DJ

  Hello

  You can also use a free program called GParted.
  It s partitions management software that allows you to erase, to create, to shrink the partitions.

  Nice tool and free!

• Satellite P300 - 20 H - what should I do after HARD drive recovery?

  Hello

  I just picked up my Satellite P300 - 20 H, using HARD drive recovery,

  Any ideas as to what I should do now? Laptop backed up, HDD Recovery wiped and returned the laptop to factory default. What should I do now? I never wiped a laptop or a PC before. I did the restore via the HARD disk and all came back when I got the laptop almost 2 years ago but now I have 108 updates to windows, and my Toshiba Tempro does not work.
  I have to update all the drivers on the laptop and if so, how do I know what needs to be updated and how can I do this?

  I went to the Toshiba site and he gave me a list of the drivers available for my particular model but I am not sure how much of these driver updates, I need to actually download and update.

  If someone could help me it would be really appreciated.
  I would be delighted if someone could just explain to me, because I don't know anything about pc / laptop and just want my laptop back to power. So that everything works correctly. I read in the section of the conductors, on toshiba.com that not all windows service packs must be downloaded not all work along the coast Toshiba laptops. So im stuck if I have to download and install updates Windows 108 that are required to be installed also.

  Hope someone can help out me.

  Thanks in advance.

  Hey,.

  I m wondering about your question: it seems that you have made the recovery of HARD drive but you didn t know what HDD recovery not right?
  As you have noticed, it will restore your computer back to factory settings. You have the same settings that you have purchased. It is therefore useful if Windows doesn t start more or you want to reinstall Windows.

  You can use your laptop as before: there is no difference. All Windows updates should be installed, that's very important because they are security updates day and you help protect your computer. So, start Windows updates and follow the installation.

  Site Web de Toshiba driver updates aren't important, only when you notice problems. If this isn't the case, you can forget the driver updates. ;)
  ?

• Can satellite L300-29V - I roll back to Vista after installing XP?

  Simple question: assuming I made the recovery discs, is it possible to erase Vista, install XP and then re install Vista using recovery disks? The laptop is a Satellite L300-29V.

  A big thank you in advance I can see no clear answer elsewhere.
  John.

  Hello

  If you created the recovery disc, you can do what you want. Why? Very simple: the recovery disk contains an image of the factory settings. This means that the version of Vista pre-installed with all the drivers and tools. It is him you even have started the laptop, the first time.

  You can install XP, Linux or whatever you want. Demarrer start from the recovery disk, follow the instructions on the screen and you go back to Vista.

  I hope this information is useful for you.

  Welcome them

• Satellite L670-12J - Chicony camera does not not after installing Win 10

  Hi I have just upgraded to Windows 10 on my L670-12J and the camera not working anymore. I tried to search for a driver Win 10, but I have found none.
  Also some of the function keys don't work anymore and of course the tab that opens at the top of the screen has disappeared also.
  I install a software to check for driver updates associated with win 10, but he has not identified a problem or a driver for the camera.
  Can anyone help please.

  I also had same problem with cam,

  finally found the solution-

  go to the devices-> update driver software Manager (on cammera, eventually showed as unknown device, to actually figure on which we're cammera)-> browse my computer for driver-> let me pick from a list of device drivers on my computer-> pick chicony usb 2.0 cammera, he'll give warning that this driver might not be compatible ignore the warning, the camera work...
  (Not sure if the camera was on the list before I installed win 7 driver that I got
  http://forums.Toshiba.com/T5/Windows...de/TD-p/658807

  However, I recommend that you are looking for is this option in the available devices first)

• What happens with applications pre-installed you root your phone?

  I look at (yet) to root my phone, so I can return my xperia pro a bit 'faster' or go to GB, anyway, because my phone had mcaffe security and antivirus preinstalled, I wonder if I'll lose those if I root the phone?

  There are 2 ways to root

  (1) to unlock the bootloader

  and

  (2) w / lock a bootloader

  If you root 1) then you will get more updates you will need to manually update your phone

  If you root 2) then you can use CCP, SUS or OTA for update your phone

  Don't forget to mark the correct answers & useful answers

  Another issue, if you have time please check this thread

  http://talk.sonymobile.com/thread/44888

• Satellite L300 - no start menu of Vista after installing Win 2003 Server

  Hi friends

  Recently, I brought Toshiba L300 (pre loaded vista). I want to install Sql server 2005 enterprise edition.
  So I installed Windows 2003, enterprise edition.
  After that I installed when I start laptop, it won't for the menu of the OS.
  Its loading only Windows 2003.

  I want vista also.
  Please help me

  And I need driver sound and video drivers for windows 2003...

  Please help me

  It is very simply;
  Your operating system server Win 2003 a damage and crushed to the Vista Boot Manager menu and therefore you don't get the Vista Boot Manager.

  You just lucky to get this Vista Manager startup is again to boot from the ORIGINAL Vista MS DVD. He undertakes to repair the boot loader, and you will be able to start in Vista.

  Then, you need to install the EasyBCD tool. It of free and this tool helps you to understand the additional operating systems in the Vista Boot Manager.

  PS: Win 2003 Server drivers are not available. You could check if some drivers Win XP would work on this laptop.

• Satellite L755D - 14 c does not detect Bluetooth after installing Win 7

  I have laptop Toshiba Satellite L755D - 14 c and I used to use my internal Bluetooth in my old system of operating Windows 7 64 bit, then I reinstalled Windows 7 and all of a sudden the Bluetooth went

  I tried to installed the driver but nothing happened, as the device was not there at all.
  Now I have Windows 8 64-bit on my laptop.

  Can you help me with my problem?

  Hello

  Satellite L755D - 14 c belongs to the PSK36E which was equipped with the Atheros WLan card series. This wireless network card supports BT as well.
  Because of this, you need to install additional software called Atheros Bluetooth Filter Driver Package. But this step is necessary only running Windows 7!

  If you what to know how the product?
  Install first the Atheros WLan card driver, then the Atheros Bluetooth Filter Driver Package and, finally, the battery Toshiba BT.

• Satellite S50-B-15N - HDMI does not work after installing Win 8.1

  I just bought a new S50-B-15N.

  When I connect a monitor to the undetected HDMI port.

  I'm under Win 8.1, but cannot find a driver listed there to the poster as missing in Device Manager.

  If you are using the original operating system preinstalled that you got with your machine all the necessary drivers are already preinstalled.
  I don't know what the problem is here. Make sure that the HDMI cable is connected properly and turned on your external display.

  Test it please with your TV too. He has to work.
  I have S50-B-12 q and it works perfectly with my Panasonic TV.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• What should I do when my computer is to do the diagnostic test, what happens with missing \windows\system,32\winload,exe?

  Please help my friend

  When my computer is to do the diagnostic test, what happens with \windows\system,32\winload,exe lack what should I do now, it's for a friends computer

  Please see: Missing file \Windows\system32\winload.exe

• What happens with the app that I do not install now?

  What happens with the app that I do not install now? It will be available 1 year from the moment I am installing? Because I only need to photoshop and Illustrator now, but next year, I will work with inDesing. I have not yet installed inDesign and wish that, when I install it the next year it will be available 1 year. I bought the cloud creative adobe and I only install Photoshop and Illustrator now.

  Thank you

  In addition:

  Membership begins when you buy instead during installation. All applications are on the same schedule and will expire and renew at the same time.