Satellite P300 - screen is broken - how activate the external monitor

Similar Questions

• Black screen after on native screen only hp logo, but the external monitor is ok

  Hello everyone. HP Pavilion dv9700.

  The graphics card has been burned, and I ordered the new motherboard of eBay and replaced it.

  The problem is:

  When I turn on the unit, the native screen flashes once the HP logo then it becomes black. If I unplug the video cable and connect the external monitor, it works perfectly. The same thing with remote access. I start with a blank screen, and I can connect remotely to the laptop.

  What did I miss? where to look for potential problems?

  the problem has a link between motherboars and display.  I could see the screen by moving the display cable. Maybe it's because the poor quality of the motherboard, I bought

• Not possible to activate the external monitor on Satellite M40X-159

  Hallo, I have to drive a VGA monitor external in a notebook of SM40X-159, but without losing the display on built-in LCD.
  I am not able to do that!
  When I select external monitor LCD turn black!
  How can I solve this problem?

  Thank you for the answers.

  Hello Fabio

  With the combination FN + F5 keyboard shortcut, you can change views. As far as I know, you have the icon with two screens.

  Good bye

• Satellite U305: can't watch video on the external monitor on Vista with Dynadock

  Hi mates,

  I have a Satellite U305 running Windows Vista, I also bought a VGA Dynadock with HP 20 "external monitor.

  I have uppdated all Dynadock readers (Audio, video, etc.) to the latest version, but DVD-video or MPEG video recorded with my camera is not possible to look at the monitor extended that in the main screen (laptop computer monitor).

  For example, my DVD Toshiba drive works normally on the laptop monitor but when I transfer window extended monitor, Toshiba DVD Player stops to work.
  Video does not work on the extended screen.

  Is this OK or I did something wrong configuration? Is this a bug? If this is a bug, how to fix this bug?

  I'm you worry because I plug a large external monitor to watch a few movies that I can't watch it.

  Thanks in advance for your help.

  Nilton

  I agree with the snipe of the user. The dynadock is simply not designed to transfer the enormous amount of data that accumulate to watch movies on DVD.
  The USB ports are simply not designed for this

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• HP Envy X 2 (15-C001dx): HP Envy X 2 (15-C001dx): question seeks to use the external monitor

  I have a brand new HP Envy X 2 (15-C001dx) with Windows 8.1. So far, it works fine by itself. I tried to connect an external monitor to the laptop using an HDMI cable from the laptop to a LG L246WPQ screen. The problem is that 10-15% of the left side of the content portable screen does not appear on the external monitor. Missing from the external display is the word "Start" in the upper left with roughly 2 columns to tiles. This occurs in the two "dual display" or "show only the screen 2" modes.  It's using a resolution of 1680 x 1050 times the cell phone and the LG appearing in support. Using the touch screen on the laptop I can scroll tiles to the right and see the missing columns at the far left. The information displayed on the external monitor begins as far left this screen will be displayed. In other words, there is no black and white on the left box. Except for the missing information on the left side, from the rest of the external display content seems fine. I have updated video driver of the laptop at the latest on HP.COM.  No change in behavior. I tried all the options I could find on the LG OnScreenDisplay, but nothing does the display not better. I've seen complaints on some forums that some "DPI" support added in Windows 8.1is causing many grief monitor for some people. Who would have something to do with it?

  This sounds like a video driver problem?  Something incorrect or incompatible with this LG monitor? Suggestions on other things to try?

  Thank you

  @outback ,

  Hello and thanks for the display on the HP support forums,

  The first thing I would try this question takes the hdmi cable and plug it on another monitor or a TV.

  If the same problem exists then LG issue.  If the same problem occurs on other screens or TV then looking at a resolution problem on the output of the system.

  Even if you can be able to higher resolutions sometimes native resolution will eventually force you to lower it.

  I have two screens at home who can manage resolution 1680 x 1050, however the native resolution is less than that.  and according to what I connect to the screen will depend on what I can get away with.

  Here are some links that you can see and which can be useful.

  Troubleshooting screen HDMI and sound problems

  I checked on the model of monitor you are using, and it seems to have this problem on many different systems.

  LG L246WPQ

  L246WP 24 '' LG display moved to the left driver Nvidia 8.15.11 - EVGA GTX 260

  Here is a list of the problems of google I found.

  The screen shifted to the left.

  I would like to know how this happens.

  Thanks again for posting and have a great day.

• W530 need to use the external monitor as the main

  I have a training environment with the help of portable computers W530, who are locked in a box in front of the offices. It is not practical to reach the computer as it's hidden and so I need to use the dvi cable external monitor for the configuration of the bios, boot order, etc..

  Currently, boot options are hidden from the external screen until windows loads. The external monitor would then become active. A way around the monitor to the laptop altogether?

  Thank you

  Russ

  VGA is driven by Nvidia, so apply the same parameters. Comes to the boot monitor in VGA BIOS (I forgot what we call this specific setting, as my W530 is at home). You should always pass nvidia Optimus only.

• Screen saver does not not on external monitor

  I recently bought an Acer Aspire 5742Z under Windows 7 Home Premium (Service Pack 1).

  The screen saver (one of the pre-loaded Windows screensavers) works fine on the computer screen, but he did not come if I connect an external LCD display.

  I read that this kind of problem may be related to devices such as the mouse/keyboard wireless. However, in my case I have that keyboard/mouse USB connected to the laptop via a USB HUB. No wireless device.

  Any suggestions?

  Thank you in advance.

  Hello

  I did work on the external display.

  All I had to do was re - run the performance index test. I don't know why, but after having done this integrated screen saver released normally on the external monitor.

  Concerning

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• How the external monitor, my main screen and not the laptop?

  I went to devices-> project->, extend, but the only option seems to be the laptop as main screen and the secondary monitor. I would like to the external monitor to the main screen. I did it on other computers, probably, it is possible with the updated technology?

  Any help would be appreciated.

  Thank you

  Hi tide,

  I suggest you follow these steps on an external monitor as the primary display.

  a. drag from the right edge of the screen, tap settings, and then click change PC settings.
  (If you use a mouse, point to the corner bottom right of the screen, move the mouse to the top, click settings and then click Change PC settings).

  b. press or click on PCs and devices, and then tap or click on display.

  c. in the image preview, tap or click the monitor you want to use as the main screen for the select.

  d. Select the checkbox make of this my main screen .

  See the article for more information.

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Note: applies to Windows 8.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.