Satellite - P70 - A: BSOD VIDEO_TDR_FAILURE all in game

Similar Questions

• Satellite L850D - slow all in game

  Hello

  I have a L850D Satellite and I have a problem to play a game.
  Its so slow work as the computers in the 1990s.

  What could I do to makeit right work and without problems?

  WINDOWS 7

  Hello

  I put t know what the Satellite L850D-xxx you have exactly and what game you try to play, but all computer games require specific hardware specifications.
  In this case, you should check the specifications of portable equipment and compare these details with the requirements of game.

  You ask what you could do to improve the performance of s for laptop.
  Well, all you can do is upgrade RAM.

• Satellite P70-A01C in World of Warcraft frame rate is LOW

  Bought this laptop a few months as a game machine.

  Said he would go to more recent games with little drama, but I have problems with World of Warcraft. Even with a quad core processor, 16 GB of RAM and a 4 GB graphics card I sometimes 9-12 fps.

  This is usually when there is a lot of things, like during a raid, but, nevertheless, with these specs this computer must be able to manage. Normally I get around 80-90fps and I get similar on my desktop PC (quad core, 8 GB RAM, 2 GB graphics card).

  Suggestions as to how I might solve this problem?
  I always have the latest NVIDIA drivers installed and keep all the rest as well up-to-date.
  I wonder if I missed something!

  Thank you.

  Laptop specs page provides information about the integrated hardware laptop.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01c002/specifications

  _It sys: _
  + * Graphic * nVIDIA GeForce GT M 745 4 GB with Optimus and Intel® HD 4600 graphics card +.

  NVidia Optimus technology passes between the external graphics chip (nVidia) and including graphic internal to the CPU (Intel® HD Graphics 4600) in order to save power.

  In my opinion the slow pace could be related to the graphics chip that is used by this game. Maybe the game uses the graphics card Intel HD instead of GPU nVidia?

  If you want to know how to switch between nVidia and Intel, check this short youtube clip:
  https://www.YouTube.com/watch?v=Zh4HCadTY_A

• Satellite P50 - C - 17 M - problem with games

  I just bought a new Satelitte P50 - C - 17 M with inteL HD integrated graphics cards and also an external of 950M from Nvidia geforce gtx I guess?

  I'm really not good at this sort of thing, anyway I chose it cos it was cheap for its specifications and also 8 GB of ram, I thought it would be good for a game until I buy a desktop computer. Ive changed all things need in Nvidia Panel so all my games and applications are using the graphics card from NVIDIA and I've also clocked it form 993 GPU in 1124, which is the highest before he goes to the overclocking I think.

  First I tried to play the way of exile and I was happy to see my FPS up to 250-300 fps, but then I kept getting spikes up to 10-20 fps that was not logical. I tried to find a solution online and people were saying that the game has race problem on Win10, but even when I ran it in compatibility with 7 or 8 it continued doing the same drop in FPS.

  So last night I tried to play FFXIV and kept the same past.

  My constant fps were 59-65, but then I would have up to 10-12 points. I asked my friends and they told me that my laptop probably evolves to the internal graphics card during the game on his own so the FPS will be declining.

  Is the any landmark known for the problem :/?

  Thanks in advance.

  In Christmas 2015 buy a laptop Toshiba Satellite P50 - c - 11 k.

  It was 2 times by the technical service for various reasons and 2 the main reason was properly fixed (a failure of hard drive and another failure on the LCD)

  Recently, I got in touch with the service center for a problem, I think that I started to use the computer. The computer has a large processor and a large graphic and when used separately team offers exceptional performance.

  But I have a big problem that makes it impossible to use it normally.
  At the point where I use the computer with any of the games I bought legally and cerciorandome that the equipment meets the performance requirements of leftovers too.

  Early on the game should be noted that the team starts to heat a lot, after 5 minutes starts to slow down excessively. Monitoring the software using the following can be seen:
  -FPS (frames per second) generated by the game remains stable for the first 60 minutes, running with absolute normality
  -The temperature of the CPU starts to soar, reaching his limit of 105 ° C 5 minutes
  -At this time, the FPS success until 10/11, remaining so until the processor retrieves the temperature of 80 ° C
  -FPS return to their normal level of 60 a few minutes more, everything works perfectly during these times.
  -At the time where the processor returns to reach 105 10/11 FPS again until that process is repeated constantly.
  -This error is played every 2 or 3 minutes of play, indifferently, resolution, quality graphics and everything what you can get for configure options of the games.

  Looking for information on different websites on the problem and its solution have found different information that points to a serious problem of computer design.
  Because the CPU and GPU share the same broadcaster at a time that the graph starts to render passes to the temperature of the CPU's are not fast enough to cool the coming collapse.

  http://laptopmedia.com/review/Toshib...per-mid-range/

  I raised this issue with the service the customer of Toshiba in Spain for a couple of times. The answer is:

  «The information I have available, they indicate that the laptop has been tested and left our cumplindo Center repair factory specifications.»
  We can do nothing else in your laptop because it meets all our references and diagnostics. "

  I feel that they do not read my emails

• Drivers for Windows 10-Satellite P70-A-120

  Hello everyone.
  I have problems with my Satellite P70-A-120, I can not find drivers for Windows 10. Now I have a problem with the bluetooth connection, all devices to show me "Retribution" (unknown).
  Excuse my English...
  Thank you and greetings from Spain

  Here you will find the drivers for this model.
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Satellite P70 - A - recovery/transfer on different drive system

  Hello
  I buy a new drive SSD and Satellite P70 - A - 10 L. Operating system (Win8) is located on 1 TB of HARD drive. What should you do to transfer the system to a new disk? or how to retrieve it on SSD HARD drive instead?

  Apo86

  All about recovery image and recovery you can read in the document s user manuals. You will find information you need to create a recovery media. Need DVD or USB.
  You can't just copy recovery image to another SSD or HARD disk and later to begin installation of recovery here.

  You must create media recovery bootable utility preinstalled Toshiba Recovery Media Creator.

• Problem Bluetooth satellite P70-B-102 - upgrade to Windows 10

  Hello to all forum users.

  I have a laptop Toshiba Satellite P70-B-102 with the operating system Windows 8.1 in Portuguese.

  The problem I have is that I can not upgrade to Windows 10, since, according to the upgrade of Windows application, the computer cannot update the Bluetooth drivers, including the following: Bluetooth RFHID, RFBNEP, RFBUS and RFCOMM.

  This situation remains at least a month and a half and I can't update windows to version 10.

  Can someone help me solve this problem?

  Thanks for your valuable help!
  Pedro Moura

  It's very strange... I think it must be some kind of Windows bug... I recommend you check if all Windows updates and patches are installed.

  In addition, the unit is listed as a supported upgrade Win 10 model, so win 10 update should be possible.

  The unit is here: http://win10upgrade.toshiba.com/swup...spx?region=TEG

  Win 10 driver can be downloaded and updated from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  but in case the upgrade of Windows 10 using the automatic upgrade procedure does not work, try to improve Windows 10 using the media creation tool
  http://Windows.Microsoft.com/en-us/w...n-tool-install

• Satellite P70-A01D: change the drive letters after the 2nd SSD upgrade

  I think it's a generic UEFI / Win 8.1 question (not according to model).

  However, FWIW, I have a Satellite P70-A01D (bought locally here in Australia).

  It is a victory of 16 GB 17.3 inch Gen4 i7 4700MQ Intel HM86 8.0 64-bit RAM.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01d002/specifications

  I updated the OS to Win 8.1

  The P70 is supplied with a drive Bay HARD vacuum #2 - I bought a 250 GB Samsung 840 EVO SSD that I want to use as the main system disk / boot Win 8.1.

  I installed this SSD in bays #2 and from there I had no problem using the wizard of Samsun cloning software provided with the SSD (VCC 4.0) to clone my 1 TB on the SSD system.

  There are a lot of instructions from Samsun and around the web on how to clone and "substitute" of a HDD with a SSD - however there are much less when it comes to 'Add' the SSD - in the #2 Bay - while always keeping the original HDD fully functional as an additional drive.

  After execution of the cloning software, I tried just go into the settings of the UEFI on reboot and change the order of the boot drive placing the SSDS over HARD drive.

  It worked but there are obviously questions still as I had not renamed readers SSD worked as system but he was editing as D: and HARD drive was still C: and most of the system/application paths were always scheduled to access C:!

  It led to the crash and restart cycles of the Bureau (? & or explorer.exe?) and two consistent error messages:
  -"SkyDrive engine Sync host has stopped working".
  -"Host for the synchronization setting process has stopped working".

  I saw in the Control Panel-Administrative Tools-Computer Management-Online Storage-online-online right click on each drive disk management online online that I can access > however
  (a) I'm not sure if the solution I need is this simple;
  (b) nervous about change of letter on a disk while running the system; and
  (C) uncertain steps in order of evolution [IE. C: (non - sys) becomes M; D: (sys) becomes C:...

  At the moment via UEFI I'm back to working with the system on the HARD disk rather than on the SSD seems stable and without compromise of my screwing around!

  Apologies for the long post by train to make sure to include all relevant information. I think that my final goal is double win bootable 8.1 / Ubuntu 12.04 of the SSDS probably with Ubuntu on a 50 GB partition leaving 200 GB (enough?). I want to keep a slab of SSD space available for photo and video editing: +/-100 GB!

  I wondered simply assign new letters to readers, however the notes at the bottom of http://windows.microsoft.com/en-au/windows7/change-add-or-remove-a-drive-letter state:

  You cannot change a drive letter if the drive is a system partition or a boot partition.

  Suggestions please?

  Hello

  I think you could try to change the letter to readers as suggested in the Microsoft article.
  Where this is not possible, try to use 3rd party such as GParted software.
  http://gparted.org/LiveUSB.php

  You could try changing the drive letters might start to the top of the unit using the live USB version.
  But it might be possible that your system would not initialize correctly after this change.

  So you should not forget to mark the partition as bootable.

  Your comments would be appreciated

• Satellite P70 - A - 07 T 040 - connection to LInksys 1900AC speed

  The specification for the P70 - A indicates a transmission speed of 300bps. Have you tried some drivers, but cannot raise the speed of 144 bps to 300bps, although an old PC on our network is automatically adjusted to 300bps when the Linksys has been implemented.

  Is there a specific Toshiba driver for this?

  > Lists of the specification for the P70 - has a transmission speed of 300bps

  You mean the wireless network and WiFi card?

  First of all various satellite P70 - A portable models support different hardware specifications. This means that the different WLan modules were built in the notebooks.

  It s I knew not which module Wlan has integrated this unit but its not very difficult to verify. You will find Wlan card details in the Device Manager.

  Second, most of the modules supports various standards Wi - Fi 802.11 B/G/N
  Each standard supports different connection speed.

  802 11 B 2.4 Ghz supports 1-11Mbit/s
  802.11 G 2.4 Ghz supports 6-54 Mbps
  802.11 N 2.4 Ghz or 5 GHz supports 72-600Mbit/s

  But beware: all these values are raw values!

  You should first check out what Wlan standard is used by the Wlan module.
  This can be checked in the Device Manager-> card Wlan-> properties-> Advanced tab.

  I guess that its already set to 802.11 N standard because you've reached 144Mbit/s
  So in this case you should also read this Wikipedia article on the 802.11 standards of N:
  http://en.Wikipedia.org/wiki/IEEE_802.11

  802.11n supports two wide channels: 20 MHz and 40 MHz.
  20 MHz supports 144.4 Mbit/s
  40 MHz supports 300 Mbps

• Satellite L300-PSLB8E. Fps problem witch games.

  Hey,.
  I have Toshiba Satellite L300 on two years and play games of fps on it as counter - strike. Now I want to play a game I cant just... ;( My fps in server only 30... Earlier, my fps was up to 200. All drivers is updated. Really not in the game, all the games lag even problem... Please help ;(

  Hello

  Don t know what can cause this, but you must check the CPU and GPU performance parameters in the power management of the Windows operating system.
  In many cases the CPU and performance GPU would automatically to prevent overheating of the hardware store.
  You may need to clean the cooling modules.

  But if this produces only play online games then I would recommend controls the speed of the internet as well.

• Adding a new SSD on Satellite P70-A-107

  Hello

  Recently bought a Toshiba Satellite P70-107-A. It has a 1 t HARD drive and another empty location where I can put another SSD or HARD disk.

  I already have orderedt an SSD (840 pro) and I think puts it in slot 1 with the system and put the 1 t HARD drive in slot 2. I created a usb media recovery with Recovery Media Creator Toshiva with the recovery of the computer image.

  My question is: can I just put the SSD in slot 1 and to boot via USB and make recovery directly on the SSD? The bios will recognize the SSD?

  I need to install any drivers for bios recognize the SSD?
  Also heard that it was necessary to activate the AHCI, but I don't see this option in the bios.

  Thank you.

  If you have the original recovery media, I think that everything should be OK.
  Only put the SSD and then install original recovery image. When it's all over and the operating system is installed properly, you can add second drive.

  When you put the new SSDS go to parameters of the BIOS, check if the SSD is recognized correctly, the value of the BIOS default settings and continue with the installation of the OS (original recovery image).
  Please post comments.

• Satellite P70-A-L1M: adapter CA / CC / grounding question

  Hello.

  I have the same problem with my Toshiba Satellite P70-A-L1M described [you: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67785]

  There power adapter 2 poles with 3 pins, everything is fine already cheked with other adapter from another Toshiba laptop (with the same power and voltage).

  So, I wrote a letter to support the local customer Toshiba (in Russia, in fact), but they refused to change adapter (well, because it's the Russia ;)).

  In addition, they refused to help in any way, or just to answer, is this normal or not (in my opinion, new cell phone buzzing for $ 1500 price IS NOT normal).

  So, nobody knows, maybe there are other options to resolve this matter through any authority higher than market local support Toshiba?

  Thanks in advance.

  Hello

  (> in my opinion, new cell phone buzzing for a $ 1500 Prize IS NOT normal).

  It is completely normal and nothing unusual for each laptop with metal case that is plugged in power without grounding.

  Here you can find a detailed article on the CNET page on similar small electric shocks using Apple Mac.
  http://reviews.CNET.com/8301-13727_7...AC-shocked-me/

  In General, this is not a technical failure of the AC adapter.
  This 'shock' is the result of the flow of this alternative leakage current on the body of the user, and this causes a slight tingling.

  But as mentioned, a 3 PIN adapter would be a workaround for this problem to the ground.
  But this isn't a case of warranty since this isn't a hardware malfunction and the only option is to buy this adapter 3 AC alveoli.

• Toshiba Satellite P70 - response about the service of warranyt

  Hello
  I have a Toshiba Satellite P70. Unfortunately, it was a failure. I reported the accident on the Toshiba site two weeks ago. To date I have not received response. How long I'm going to wait for a response and repair?

  My patience is running out... Failures reported on 16/01/2016. G1G1MW0021 repair cases. The laptop is still broken in my house. Customer service is a total failure. How long I have to wait? Month and year?

• Forgotten code for girls iPad restrictions, if I restore iPad I lose all its game data?

  I forgot the restriction code for my daughters iPad mini, if I restore the iPad completely I'll lose all its game date (in particular clash of Clans)? Any help is appreciated...

  Yes. The problem you have is that restriction is part of a code backs up the iPad. So if you delete the iPad and restore so you will restore the restriction code. Not a good thing if you don't remember the password.

• Satellite P70 - how to use the second HARD drive?

  I have recently bought a satellite P70 - A - 10 d.

  I see that there is no second location on hard disk, so I can install a second disk.
  You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

  But I can't understand how screed the disc.
  Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

  Hello

  If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

  Welcome them