Satellite P750 / 02Q - can I know what speed to Atheros AR9002WB-1NG

Similar Questions

• Re: Question of HDD SATA of Satellite P750 - 02Q (type and number)

  Hi, I think to upgrade the hard drive of my Satellite P750 - 02Q, but I know not what SATA type it is (SATA I or SATA II and SATA III), and how disc can support? I think to slot in a SSD drive in there, but if she can support the SATA 2 drives, I can use the 750 GB drive at 5400 RPM existing as the second storage device.

  Appreciate your thoughts/responses.

  Thanks in advance!

  Remove the HARD drive and built-in HARD drive. On the disk label, you can find all the info. Buy the HARD drive, but with more capacity.
  I more older P500 and cannot say with certainty whether your P750 can be improved with the second HARD drive. If so there must be coverage of HARD drive to the second HARD drive. Remove it and check if the HARD drive connector is available.

• How can I know what ram slot ram in there on my G4 imac

  OK so I have an imac G4 1 GHz version and I don't have any tools to open it to see what ram slots are empty for a ram upgrade how can I know what ram slot is free and opening the mac

  There is a user accessible memory slot. You can install a maximum of 2GBs. The memory of the plant is pre-installed.

• Should I delete the programs of 2004? How can you know what is safe to delete?

  Original title: remove programs

  I think I have a virus.  I see on my computer a few applications with and installed as of 2004.  The computer was purchased in 2007.  When I run it in safe mode, it works fine and all applications have a date of 2007 or newer.  Should I delete the programs of 2004? How can you know what is safe to delete?

  Hello

  This is not an indication of malware. Could be those are placed on the
  computer by the manufacturer of the system and that was the date that firstly, they prepared their
  for massive installation, or if they did not set a date and be used arbitrarily.

  =============================================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• How can you know what drivers and programs are essential and those that can be deleted without harming my computer?

  Original title: completely clueless

  I'm totally clueless when it comes to computers, but I try very hard to learn. I am using the help section a LOT, but I can't seem to find an answer to the only thing that makes me crazy. How can you know what drivers and programs are essential and those that can be deleted without harming my computer? I have a very basic net accountant I learn on before I screw up a portable more expensive and I do a cleaning on my C and D drives to improve performance because it runs so slow but it tells me I have the drivers who slow down Windows. I would greatky appreciate any assistance from someone who has the patience of a saint and is willing to take the time to explain it to me, in terms laymans. Thanks in advance

  Drivers: you should know what you bought (in your machine) and what * you * want out of it.  If you want stability and things work properly - let alone the drivers.  If you want more performance check (and other games) in the drivers of motherboard chipset and video network from the manufacturers Web site... For more stability stick with the OEM website (HP, Dell, Lenovo - the assembler of the whole machine) and slightly more performance/push the limits (even if they want to work too - so still some stability) - access to websites of its components manufacturer.

  With regard to the programs: you can decide what you use and do not use.  If you are not sure, look it up (Google) or ask.

• Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?

  Is it possible to change sequence settings after you start a project? Also, how can I know what sequence of parameters are best for clips that I have?
  The clips I have are HD and .mp3. MTS files.

  In the latest version of Premiere Pro, it is possible to change the settings for the sequence.

  You know what settings are best knowing what you are doing.  (Personally I'm fan of formal education for this.)  I know that sounds sarcastic, but, there is no right answer to the question whose parameters are the best.  There are many variables here, then... you really need to know what you're doing.

• How can I know what my redemption code is for photoshop elements?

  How can I know what my redemption code is for photoshop elements?

  Using redemption code

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

• Satellite L750/052: Atheros AR9002WB-1NG supports only WPA?

  I seem to have a problem with a L750/052.
  I have the latest version of the driver for the Atheros AR9002WB-1NG, which is 9.2.0.316.0.
  I'm trying to connect to the modem/router is a Netgear DGND3700.

  When buying at the origin it would not connect to the wireless network it just kept rejecting the key wireless WPA2 (AES).
  I've set up a WPA (TKIP) network and it recognizes the key but it will just keep stalling even if in the same room to the modem/router.

  To further reading, I discovered a lot of Atheros cards Wireless will not support encryption WPA/WPA2 and WEP, which is much less secure support and wireless manufacturers stopped including it products out there.

  Y at - it a newer firmware that could solve the problem of the WPA or includes support for WPA2 (AES)?

  My other Toshiba has a Realtek Wireless card and no questions.

  Hello

  I found this PDF on AR9002WB-1NG specifications:
  http://www.QCA.Qualcomm.com/media/product/product_75_file1.PDF

  It s mentioned here that the Atheros card support AES, TKIP, WEP security.
  Then you should be able to use AES (WPA) encryption.
  But this map is only 2.4 Ghz

  If you need to make sure that your router is also 2.4 Ghz; This means that you must use the standard 802.11 WiFi B or G (802.11 N runs at 2.4 Ghz and 5 GHz)

  By the way; Frequency 2.4 Ghz is used by other different devices such as microwave, baby monitor, or Bluetooth, so it could be possible that these devices are thus the signal of your Wlan.

  By the way; the latest Atheros divers can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• How can you know what remains during a restore?

  I just got a new iphone more than 6 s and its been 2 days and is always restore things. is it possible to know what remains to restore or if its stuck? I was going to upgrade the software on it but can not until its finished. TIA

  Hello SCB1021,

  Congratulations on your new iPhone 6 s more! I know how you want to finish the installation process and start to use your new iPhone. Let us ensure that we discussed a few steps that can help your situation.

  Restore my device from a backup to iCloud takes a long time

  Restoring a backup can take time because of the size of the backup or the speed of Wi - Fi network. For example, iCloud may take about 1 to 4 hours per gigabyte during a restore process.

  There are several steps that follow:

  • In iOS 8 or later, check the status of the transfer on your device under settings > iCloud > Backup. If the restore process is in progress, the backup setting is gray.
  • Make sure that your device is connected to the Internet with reliable WiFi.
  • Make sure that your device is plugged into a power outlet.
  • Check the Apple progress bar that is displayed during the transfer of a backup.

  If you need help, restore your device from a backup to iCloud

  Thank you for using communities Support from Apple.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite L755D-S5104 - does not know what the problem

  Hello
  I keep a L755D-S5104.
  AMD A6 3420 M with Radeon 6520G
  4 GB of Ram
  500 GB hard drive.

  The problem with my laptop recently is that I am getting i/o device error (WriteToDisk) errors thus the laptop hangs / crashes with a screen of jibberish/sand-of looking.

  So far, I got error screen with my PC as well before and I'm pretty sure it's because of the unstable driver for video/chipset. I solved as before with the installation of older drivers (but for my laptop, I can't find a choice of versions)

  I don't know if my hard drive is the cause which as well (due to the error WriteToDisk) since mainly these two errors occur at the same time. Maybe my drive is in good health, but the video/chipset driver is causing the problem?

  My laptop temperatures are normal and there is no noisy fan noise etc.

  HDTune bad block scan displays the status of my drive HARD 100% OK but the chkdsk /r utility accidents near about 45000/67000 (screen white/jibberish causes), also, I have attached my laptop HARD drive to my computer and run the chkdsk utility it without error.

  I don't know what to do? Given that I've hardly know his choice of drivers for S5104. The error started to appear since the last two days and before that my laptop was perfectly fine.

  Post edited by: zeineb

  On this virtual path, it is not easy to say what the problem is. What you can try is to do some tests and, as I see you do this very well.
  Try to get the new HARD drive and install original recovery image on it and to experiment with the settings and clean the preinstalled OS. If you do this thanks for posting comments.

  By the way: all the drivers, you should be able to find on http://support.toshiba.com/drivers
  Just put Satellite L755D-S5104 from here and you will get the list of all available drivers.

• Toshiba Satellite laptop - how can I tell what programs I should be running at startup

  Original title: How can I tell what programs I should be running at startup

  I have a toshiba laptop satellite, since 2008, I don't know what programs should run at startup and those who should not

  See if you can make head or tail of these items.
  I admit that I was never able to know that disable and what to keep, and I had read a few articles on this topic. I'm not too smart, I can say.

  Starting programs database
  http://www.bleepingcomputer.com/startups/

  Startup programs, enable disable ot:
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Startup applications. Do you really need all of them.
  http://www.PACS-portal.co.UK/startup_content.php

• How can I know what is a plugins and if I really need it?

  I didn't even know I had 'plugins '. After seeing just a list, I want to know what they are doing and if I need them (so I can clean my system if I don't). For the most part they say technically that they are. It does not help... :))

  You can always google the name of the plugin and you're sure to get an explanation somewhere in the top 10 hits. If you are sure you don't need a pug you can always uninstall it. If you come across a site that uses it, it will ask you to install again.

  If you use several browsers always transfer your settings from one to the other may have collected plugins you no longer need.

• Problem reading with film in Blu - ray 3D on Satellite P750 / 02Q

  Hi all, I recently bought the laptop Toshiba 3D (P750 / 02Q). In my attempt to watch a movie on Blu - ray 3D, he failed twice. I received a message 'is not capable of reading 3D screen connected to your player. On the other title 3D Blu - ray, they say somethng in the lineage of I don't have a 3D player.

  I use the WinDVD pre-installed for Toshiba, version 10.0.5.822
  On the NVIDIA site, in the section "Download the Drivers", the current version of the driver installed in my computer after completing a sweep, is 267.44. There is a new driver available for NVIDIA GeForce GT 540 M 275.33.

  I'm not sure if this wil solve my problem. I also hesitate if I need to contact support for drivers certified for my laptop Toshiba. The P750 / 02Q is a recent model of liberation and I find very little support on the mytoshiba site.

  Hello

  I found a few Toshiba FAQ s on 3D technology:

  3D videos on your internal LCD or external 3D via HDMI port TV
  http://APS2.toshiba-tro.de/KB0/TSB0B032B0000R01.htm

  Since it is an Australian model of Toshiba, I suggest check this Toshiba driver page:
  http://www.MyToshiba.com.au/support/computers/satellite/P750/psay3a-02q001/download?OS=25

  Here you must update the driver display and Toshiba Video Player

  Take a look here also:
  Impossible to play 3D BD movies
  http://www.MyToshiba.com.au/support/item/436

• Satellite Pro 4200: need to know what software is running the Cd/DVD burner?

  I recently bought a laptop satellite pro 4200 (new to me) and can't understand what program will run the burner.

  Anone help?

  If I understand correctly you are looking for the application software / who could burn CDs. Am I right?

  Well, I use the Nero burning rom software. It s really great program with different characteristics.