Satellite P750 - lost keys FN / hot keys and Toshiba Assist

Similar Questions

• Satellite P750-135 - key FN and Blu - Ray player does not

  OK so recently I've noticed a few problems with my Satellite P750-135 with PSAY3E-059002EN part number.

  Not words, the button FN done any work, however when the Toshiba flash card settings are configured to enable the mouse above, the functions that I would normally use, for example FN + ESC to mute or FN + F6 to turn down the brightness, etc., the works of service.

  The problem has occurred since the drivers updated by a program on my PC but I can not restore the system to a point where the driver has been updated. I uninstalled the driver and installed the driver from Toshiba Web site and tried countless other things without success. Any help would be appreciated.

  As for my second question, a while back I tried to play a Blu - Ray movie on my laptop and it works as it is. The drive plays DVD but when a Blu - Ray drive is inserted, the drive whirs, the AutoPlay window opens with no program to read it.

  I have tried opening the Corel to play it, but it does not work.
  The drive in question works on my One Xbox and Playstation 3, and I've tried other discs that don't work.

  Any suggestions?

  ccYou know that's not easy to say what the problem is here. When you get new notebook with the settings everything works and all the pre-installed drivers, tools and utilities work well together.
  Many people install some updates which are not so important, and then something can go in the wrong direction.
  > The problem has occurred for a program on my PC updated drivers...
  To be honest I don't know what program do you have average and exactly what has been updated.
  In any case you can try to solve this problem of FN keys is to remove preinstalled Toshiba value added package, restart your computer and install the latest version of the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Utility of flash cards is part of this package and I hope after installation of VAP own this will work properly again.

  Blu - Ray movie question:
  BD BD to play drive before graphic driver will change color and switch to Win7 basic running drive Toshiba BD is not compatible with certain Visual elements. Have you noticed this in the past, this automatic switching between the color schemes?
  Did you perhaps updated original display driver Toshiba?
  > I have tried opening the Corel to play it, but it does not work.
  The very fact of start or not?
  This is a bit complicated.

• Re: Satellite P750 - function keys do not work

  I use a Satellite P750. There is a row of 'Function buttons' between my keyboard and display. These buttons no longer work.

  The biggest problem is that I can't activate my wireless. When my net cable is not plugged into the ether, it usually detects wireless network that I can connect to. now it does not detect a network. I know that it is not a problem with the wireless router. When troubleshooting the connection problem, he advises me to use the function key to activate wireless communication.

  I tried to remove and reinstall the system driver added value, the cards flash utility support pilot, as well as my wireless network card driver. and the problem persists.

  I also tried a system restore to a date where I know that these problems were not present. and this does not work either.

  I would greatly appreciate help on this.

  Jason

  Hello Jason

  In General, resettlement of VAP should help with this.
  If this isn't the case, you can reinstall the OS using HARD drive recovery option. After doing this, you will have factory again and everything should work again.

  This option isn't for you or you don t want to reinstall OS?
  By the way: what operating system do you use?

• Satellite P750-13N - problem switching between nVidia and Intel GPU

  Hello

  I used my laptop Satellite P750 on its default settings because I brought and until now that has been very well.

  I use it mainly for games and now some of the more recent games have a hard run Shading.
  I used * www.systemrequirementslab.com/cyri * and he told me that I should be able to run most of these games without any problem.

  I checked my specs in dxdiag and noticed that it seems to be using the integrated graphics card Intel rather than the Nvidia Geforce GT540M map. I tried which helps the card in the Device Manager and disable the Intel graphics card, but the resolution has dropped drastically and dxdiag says there is now no graphics support found.

  I did something wrong or do you think that there is a problem with the laptop?
  Any help would be most welcome.

  Thank you

  This can be done in the nvidia Control Panel.

  + 1. Click Start, then Control Panel. Select Classic view in the left side of the window. +

  + 2. Double-click NVIDIA Control Panel. +

  + 3. Click view, and then add the "Run with graphic processor" Option to the context Menu. Close the NVIDIA Control Panel. +

  + 4. Right click on the title of the application and select run with GPU. Then, click processor high-performance NVIDIA. +

  Found this in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67755

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Satellite Pro A120 - where the guard & easy to Toshiba Assist button

  When I bought my Satellite Pro A120 he had on his keyboard a large circular red label - ' test it! Toshiba Easy Guard "and"Button to help Toshiba"but I can't find the Toshiba Assist button on my laptop."

  Someone has found the way to get to this?

  Hello

  Toshiba Easy Guard is not a simple also, but a collection of properties of different portable computer that secures your notebook.
  Check out this page of Toshiba Easy Guard:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/TOSHIBA_EASYGUARD_08/

  Toshiba Assist button would start the Toshiba Assist tool:

  You can optimize the button in this way:
  1. start the Toshiba Assist utility using one of the methods described above.
  2. in the left side of the Toshiba help window, click the OPTIMIZE.
  3. in the window to optimize it, click the icon of the TOSHIBA button controls.
  4. in the properties of controls on Toshiba window, ensure that TOSHIBA help is selected in the drop-down list in and then click OK.
  5. close the TOSHIBA help window.

  Check this box:
  http://IE.computers.Toshiba-Europe.com/innovation/FAQ.jsp?service=IE&FID=TIU0000003562

• Satellite A300D - FN keys and fan not detected

  Hello

  Crashed my HDD (winlogon, MBR, boot,... deleted. Just a disaster), so I have to format the drive and make new instalation of Windows. And it happened Toshiba utility installation. And I can not find the drivers for the FN key. I googled to be called "Utility Flash Cards", but only what I founded is pdf of it. And also my Everest or Notebook hardware control is none of my fans.

  So I ask, where can I find it? Or better... is a place of grand ' ol pack after the new installation of the operating system? Why my fans are not detected by the system? Maybe I just forgot to install a driver. It is quite possible. So, where is a problem?
  And... I'm just curious, y at - there a programe, utillity... etc. which can control the fans?

  I have the Satellite A300D, Windows Vista 32-bit

  Thank you very much!

  Hello

  Can on mate, you can find all the drivers and utilities on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You must install Toshiba Value added Package. That's all that you need for the FN keys. ;)

  But I m wondering about your question about the fan. Why do you think the fan isn't recognized? Everything about the fan will be controlled automatically. You can change only the method of cooling between performance and battery optimized in Windows power management.

• Re: Satellite A500 - need help with the FN key and Toshiba programs

  Hello

  The fn key Eco and other buttons specialized such as the one that opens Windows Media Player have stopped responding on my PSAM3A-03P00E A500 running Windows Vista. I can always change the brightness of the screen with the FN key, but no menu appears at the top of the screen.

  Also Toshiba programs that are intended to be run at the start as PC Health Monitor are not auto start, even if they are enabled in the Configuration (msconfig) system.
  The Bluetooth Manager however initially runs upward.

  I have blue screen errors, but they are not a problem since I have updated the BIOS to 1.5 and uninstalled Zonealarms.

  See you soon

  Hello

  Try reinstalling the additional package of Toshiba. AFAIK, this utility is responsible for these functions.

• Issue of license with Windows XP, a lost key and lost disk.

  I work in a church in trying to ensure that all of our licenses are legal. A few years back our Windows XP Professional and our key to Windows XP install disk have disappeared. People at that time here downloaded a copy of the internet and used a key found on the internet. Not a key that we purchased. There is always an invoice for this computer. He wasn't able to pass Windows Genuine tests. My question is, is it legal to install like this. After all, we had a license appropriate at a given time. What problems of license failed us by doing this?

  Assuming that the company that made this PC for the Church still exists and keep good records, and did not use a version without Windows license in the first place (you say you had "a good license" at the same time), you can contact the company for the correct XP Pro installation media and the right corresponding to the product key.

  If this isn't the case, you will need to purchase a legitimate copy of Windows XP Pro, which can be difficult or expensive since it is no longer available for sale through traditional channels.

  If the PC is not old and is able to run Windows 7, it is an option, too.

• Satellite 5205-S703 (Windows XP Pro SP2) and TOSHIBA common modules

  I have a laptop:
  Toshiba Satellite 5205-S703.
  After you have installed Windows XP Pro Service Pack 2, I can't install TOSHIBA common Modules (file: s140acpx.exe).
  During the installation of this program gives the message:
  "The installation is failure. Please make sure that reason then try the install again.

  Hello

  As far as I know your laptop is an American model. Please visit this page
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp. Please go to download and select your model of laptop. All the drivers, tools and utilities appears.

  Good bye

• Satellite L300D - how to restore factory default and USB key?

  Hello

  I need urgent help. I got an error on my laptop and I lost my recovery disc, so I borrowed a friends disk by mistake. I deleted the partion that everything has been installed on.
  Can someone please help urgently? I have all my files on a USB key and really need to give a presentation on my laptop by Thursday September 23. Can someone please? I read about a secret partion on laptops to default factory default

  concerning Ross

  Hi elrossco22,

  What Satellite L300D, you have exactly and are - this a European model?
  If yes try to access the Windows Advanced Boot menu and choose fix my computer. Then, you can start the recovery of HARD drive feature.

  If this isn't the case, you need a new Toshiba Recovery disk to restore to factory settings. You can order such a drive here but it s for European models only:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite P750-10 t - (Eco, WLAN, Volume, etc.) function keys not working not

  Hello world

  I have a problem with my Satellite P750-10 t (PSAY3E-02000KGR, Windows 7 64 bit, German-language edition).

  The "Function keys" top line, naming Eco Mode button, WLAN button, program Start button, Play/Pause button, Mute button and Volume-/ + buttons stopped working a week ago. They light up correctly when starting the corresponding modes (e.g. Eco Mode lights up green when the Eco utility is in Eco mode by mouse) or when turning on keyboard backlight, but they do not react on the touch of the finger.
  As a result, I am unable to use WLAN because I can't turn on the WIFI laptop feature.

  I already reinstalled Toshiba Flash Cards and value-added package of programs without success.

  You have any suggestions to solve the problem? Thank you very much.

  Best regards from Germany,
  Jan

  Hello Jan

  Open it please help Toshiba > Optimize > parameter HW Toshiba > settings button > is option function active button it?

• Satellite P750 keyboard won't let me enter the key 1 or 6

  Hi people,
  Hope someone can help me.

  My keyboard has developed a problem and won't let me enter the key 1 or 6.
  All the others work fine. This random enjoy error at first, but now seems to be like that all the time. I did a system restore, but that did not help. I am running Windows 7.

  Any suggestions, help will be appreciated.
  See you soon
  Rob
  It's a PSAY3A - 02J001 Satellite P750

  I guess that your keyboard is faulty. That would explain the problem. Only for test purposes, connect an external USB keyboard and check how it works.
  If everything works correctly, the keyboard controller is OK and it is certainly a problem of internal keyboard.
  In this case only the replacement keyboard help.
  Where the guarantee is valid, I would recommend contacting a sine of Toshiba ASP this would be fixed for free.

  Dude good luck.

• Satellite C650-17Z - keys FN and Ctrl-Alt-Del does not work

  I recently bought a Satellite C650-17Z and the function key and the Ctrl-Alt-Del key combination ceased to operate. Is there a solution to this all - I got older laptops from Toshiba is a driver issue, but I can't find the drivers for specific keyboard on the Toshiba site.

  Could someone enlighten me, please?

  Hello

  Regards the FN keys will find it many other topics in the forum.
  Did you find them? Is there a solution for you?

  In any case, you must reinstall the package of added value and utility to Support Flash Cards because both controls the FN keys. You can download all the tools on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But for the Al-Ctrl-Del combination, there is no special driver but maybe it can be solved with these tools...

• Satellite A100 - by pressing the Enter key and BACKSPACE insert a backslash

  The keyboard on my Satellite A100 has a perculiar behavior.
  The Enter key and BACKSPACE times return the insertion point to the beginning of the next line, and then insert a backslash.

  The behavior is similar in various products such as MS Word, internet Explorer, Notepad, WordPad, to name a few.
  The BACKSPACE key returns to the top of the page in MS Word and Notepad.

  This behavior is very frustrating and makes every day very difficult calculation.

  Does anyone have a solution to this problem

  Hello

  First I thought that this could be a result keyboard or Ms Word, Notepad setting language setting
  But while reading the story one more time, I think that this problem could be linked to the failure of hardware.
  But this is just a suggestion.

  I put t know if this problem would appear on new recovered BONES.
  Have you tried to restore the operating system using the Toshiba Recovery CD?
  Maybe you should do to see if it's really a hardware problem

  Good luck