Satellite P770-118 - cannot read DVD after upgrade of Windows 8

Similar Questions

• Satellite C660-125 - cannot access BIOS after upgrade to Windows 10

  Hello, I just upgraded to 10 Windows Home of Windows 7 and now HWSETUP. EXE is not running and when restart the laptop I can't enter the BIOS with F2 or F12. Can someone companion please? Kind regards

  You must install the driver from Toshiba for Windows 10 system.
  However the C660 does not seem to be in the supported list, you may need to go into BIOS instead.

  Hold SHIFT key during shutdown to shut down Windows hybrid suspension mode. Keep now SHIFT until the power goes out.
  The BIOS F2 message appears only if the laptop is a cold start.

• Portable Satellite 1800-750 cannot read DVDs that require files avi (codec)

  my laptop satellite S1800-750 cannot read DVDs that require avi (codec) files. l have updated dvd drivers and upgrades of my multimedia player of series 10, but nothing helped. I need emergency aid.

  Hello

  I suggest, that it can not ONLY play .avi files. Am I wrong?
  In this case, you need additional codecs.
  This has nothing to do with the DVD drivers or firmware.
  Check the internet for the codec. I'm sure you will find a lot of info if you want to google a bit.

  Good luck

• Cannot read DVD or CD error: "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  Original title: I CANNOT READ THE DVD OR CD ON MEDIA PLAYER, IT is A what NO NOISE 'n' INSTALLED EITHER ALL THE IDEAS THAT DO?

  I HAVE PROBLEMS WITH THE PLAYER ON MY LAPTOP, I JUST GOT ALL OF THE DELETED CONTENT SO THAT IT IS FIXED AND I AM UNABLE TO PLAY DVDS OR GET ANY SOUND MEDIA PLAYER WHEN I ENTERED A DVD THE MESSAGE READ:

  "Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer."

  ANY IDEAS PEOPLE? I THINK I NEED TO REINSTALL THE SOUND AND EVERYTHING BUT DON'T HAVE ANY IDEA OF THAT KIND OF THING OR WHERE TO GET IT FROM :( ANY HELP WOULD BE GREATLY APPRECIATED.

  Hi SARAH-82.

  The sound works fine when playing any video recorded or audio files on the computer?

  Method 1: You may need to download the audio effect plug-ins or ability of DVD in Windows Media Player, please visit the link below

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3: To the problem of audio or audio playback, you can follow the steps mentioned in the link
  Tips for solving common audio problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite P50 - B - internal error power after upgrade to Windows 10

  After the upgrade to Windows 10 and after reboot, I got Internal_Power_Error and laptop restarts automatically.
  After signing, get the same error of internal power and the repetitions of the process.

  I contacted Toshiba Support and they did NOT have a fix for this problem.

  The power driver should be updated but no ETA on when the fix will be available.

  Be wary.

  This does not resemble Toshiba problem. The issue (error message) appears due to AMD graphics card driver compatibility issue.
  This seems to be a problem with all computers with a particular AMD GPU.

  Probably the 10 Windows take the old driver (catalyst process) is not fully compatible and the solution could be:
  -graphics card ATI catalyst unisntall
  -updated the driver... (try to download the drivers Win10 for AMD driver AMD site)

  You should be able to update the drivers for the GPU in right click Device Manager the GPU.

  In case the 10 Windows will not find an AMD update, it must simply wait and use the internal Intel GPU that is part of the CPU. This occurs after the AMD/ATI driver has been uninstalled.

• Satellite L750 - WLAN does not work after upgrade to Windows 10

  After the upgrade from Windows 7 to Windows 10, internet Wifi don't work do not. Unrecognized WiFi. Seems that the driver for the wifi does not work with windows 10. Any ideas please?

  Dear Jolgas,

  It seems that the problem of driver. You should installed driver WiFi for window 10.

  Thank you
  Solène

• LaserJet pro 200 M276nw: cannot fax document after upgrade to Windows 10 with LJ Pro 200 M276nw

  After the upgrade to Windows 10, I am not able with a facsimile of a document (e.g. Word). I am able to fax directly from the printer. I get the message: unable to communicate with the device.  When I got to the printer at the beginning of last year, this same question occurred when in Windows 7, when my browser has been updated to IE 11. The solution was to go back to IE 10 because of an IE fix the origin of the problem.  I would have thought that things would have been developed for Windows 10.  How I set up so that I can fax a document and from the desktop?

  I found the patch 'Question Fax with 11 fix IE - HPLJ_M276_Fax utility' that solved the problem.

• Optiarc bd rom will not read bluray after upgrade to windows 7

  I tried a year ago to find and to address this issue and give it all up.  I'm trying again now because it really peaves me that I pay for a product a fork over the extra money just to be able to watch a bluray disc and then when I spend more money to upgrade to windows 7, my driver is no longer recognize blurays.  the pilot is optiarc 5500 s, I really hope someone has solved this problem by now, or, worst ever customer service.  Help, please.

  It is a puzzle game. According to Windows 7 compatibility for this drive, there should be no compatibility issues.

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Sony%20NEC%20Optiarc%20BC-5500S%20Blu-ray%20Drive&v=Sony%20NEC%20Optiarc&uid=BC-5500S&l=en-US&pf=9&pi=0&c=Storage%20Devices&sc=CD%2FRW%20%2F%20DVD%2FRW&os=64-bit

  I don't hold much hope that it will help but I would like to remove the device and allow the system to reinstall.

  Go to the Control Panel Device Manager. Sanicle unit on the list and uninstall. Reboot the power off. Let the system re - detect and re-install support. Reboot once again and test.

  Let us know.

  Tom Ferguson

• Satellite Pro M30: Cannot read DVD on DVD - RW disc

  I have can´t dvd´s read...
  I can burn but when I start to read, it shows me an error like this "E:\ is not accessible. The request cannot be performed because of an i/o device error."

  It s killing me, please help

  Hello

  The IO device error occurs if the drive has a problem with the disc or the configuration of your system (mainly a problem of disc).
  Peut-t DVD player play all DVD or just DVD serious?
  What burning software did you use?
  As far as I know, you should always logged out of engraving.

  Also if you need the DVD Shrink software please check this link:
  http://forums.Afterdawn.com/thread_view.cfm/192015
  http://forums.Afterdawn.com/thread_view.cfm/244972

  http://Forum.Digital-Digest.com/archive/index.php/t-45081.html

  Good bye

• Satellite L755-169 cannot read DVD + R DL

  Hay guys

  I have a problem on my Toshiba Satellite L755 - 169 (PSK2YE), my laptop can t read the DVD + R DL, but I can hear the DVD Player try to read, but it can.

  Why and how can I solve this problem?

  Can you tell us more?
  It test yourself with self created DVD + R DL discs?

  ODD can write data on blank DVD + R DL discs?

• Satellite L755 does not detect DVD after upgrade Windows 10

  I'm probably being stupid, but my dvd internal or usb Samsung drives are recognized today. The two spin up, the USB gets pling a little when I connect and disconnect. I found help topics on the removal of media creator Toshiba backup software, did this, and nothing has changed. I am now confused. He is not helped by Windows 10 hide the Panel etc...
  Anyone have any ideas?

  I managed to fix it myself. I found information about incorrect information in the registry. So with care and concern, I used regedit to remove two incorrect lines in the registry. Everything works now.

• Satellite L850 - Bluetooth does not work after upgrade to Windows 10

  After the upgrade of the W10, BT did not work so I updated the drivers Atheros AR3012 version 10.0.1.1

  It still does not work. My phone can see the laptop on BT, but says that he cannot communicate with him.

  The laptop does not tosee phone & Yes the phone is discoverable. My BT headset can not be seen now by phone.
  All this worked fine with W7

  My laptop is Satellite L850 (PSKDLE)
  Any ideas?

  Hello

  In most cases, BT does not work due to lack of BT software.
  I guess you will need to install the filter for the BT driver package.

  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10... Then try to install the Atheros Bluetooth driver filter package and check to see if you will be able to activate BT

• Satellite L300 webcam no longer works after upgrade to Windows 7

  I upgraded from Win Vista to Win 7 and my webcam no longer works.
  He said that there is an error. On the support page, it is said that this model is not intended for Win7, so I installed Win Vista drivers.
  Because the driver for Win7 is not available, the link is down. http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091013162352.zip

  Any suggestions?

  Hello

  For me, it seems that you have not installed the right webcam software and so you can't get the webcam works with installed Win 7.

  Have what version of Win7 you installed? 32-bit or 64-bit?
  European driver Toshiba page provides the software of webcam for Win 7 32 bit for Satellite L300
  It s version 1.1.1.4.

  I found this choose: laptop Satellite L300 webcam driver satellite
  In such cases you will get listed all drivers webcam L300 series

• Satellite P850-12Z: keys FN No. after upgrade to Windows 8

  Seems that the function keys, to control the volumen, the wireless and bluetooth switch, touch on/off voltage and so on seem to not work in Windows 8.

  I have installed new drivers, used the upgrade Toshiba utiliity but seems not work.

  Does anyone knoe how to solve this problem?
  It's quite annoying that, now, I can't control devices with the F keys.

  Thanks for any recommendations.

  Concerning
  Sergio

  Hello

  Added Toshiba package to win 8 installed?
  It is an essential package offering the functionality of the buttons.

• Satellite A210 - 1 4 - devices problem after upgrading to Windows 7

  I just installed Windows 7 on my Toshiba Satellite A210 - 1 4 and most of my hardware laptops works fine. However, there are 3 devices listed problem and I was wondering if you would be able to help me to identify them so that I can install the drivers.

  Base system device PCI VEN_1180 & DEV_0592 & SUBSYS_FF101179 & REV_12\4 & 1 to 5 DE67B & 0 & 33 A 4 that the drivers for this device are not installed.

  Base system device PCI VEN_1180 & DEV_0843 & SUBSYS_FF101179 & REV_12\4 & 1 to 5 DE67B & 0 & 32 A 4 that the drivers for this device are not installed.

  Not available ACPI\TOS1901\2 & DABA3FF & 1 that the drivers for this device are not installed.

  Thanks in advance!

  Check http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  If you still have any questions please let us know.