Satellite Pro 2100: black with Nvidia Linux driver

Hello

I'm trying to install the driver nvidia on the nvidia site
under ubuntu 6.06 and compilation was very good.

Problem, is that the resolution is not start TI 1024 x 768
with 800 x 600 and a black bar on the right side.

I hear this same problem under windows.

What I need is the right of xorg settings to get
This damend display work.

I hope someone could help even if someone knows
the solution for windows that would be great I
will try to adapt this to linux.

Thank you very much.

brain

I put t know a solution to the problem, but I can't believe that these problems appear under Windows. Some drivers for windows supports an extensible option and therefore this bar don t appear.
But generally it s not able to install the original NVIDIA driver on Toshiba laptop under windows. Graphics drivers from the Toshiba page are not the same as the original graphics drivers from Nvidia or ATI page.

I don't know about using the driver with Linux m but I found a piece of nice configuration info page:
http://newsletter.toshiba-tro.de/main/

That could be a few configuration for Linux tips.

Tags: Toshiba

Similar Questions

  • Satellite Pro 2100: Question about upgrade HARD drive

    Hello
    ICH have a Satellite Pro 2100 with a capacity of 40 GB HDD. Now I want wo upgrate with a 100 GB or 120 GB HARD drive. Is it supported? Where is the upper limit of the capacity of support? Is there something I need to look out? Are there special attributes that am I looking for?

    prior to thank you for your support

    Hello

    It is very unlikely that the 100 or 120 GB HARD drive works.
    I guess that the BIOS will not recognize these hard disks.
    I don't officials documents found on the hard drives supported, but I think that the 60 GB HARD drive is the biggest HARD drive that works on the Satellite Pro 2100.

  • Recovery on satellite Pro C660 - 2KM with new HARD drive with the restored recovery partition

    Hey people,
    I had a problem with a virus on this sat pro, so I decided to completely erase the hard drive to get rid of this virus. Before I did, I saved everything partiton D including the recovery path and after clearing course, I copied everything returns to a place (second partition).
    Now, try to recover and do not know how to do it. F11, F10 and F8 seems to not work. Do I need the recovery media created with recovery media creator or can I still use the recovery on the new partition D: path?
    Thanks for your help in advance,
    Stefan

    Unfortunately, recovery doesn't work on this path.
    What you need now is the recovery disk.
    In general the recovery image on the second partition is useless and you will not be able to start.

  • Satellite Pro 2100 and new hard drive

    Hello

    I saw on another post that L0nestar has installed a Western Digital WD2500BEVE (250 GB, 5400 RPM) in a Pro 2100.
    The question I have is what the interface is SATA or EIDE? The original drive indicates it is a SATA interface, but the WD2500BEVE is an EIDE interface?

    Hope someone can clear this up for me.

    See you soon.

    AFAIK all older models of laptops have hard drives with interface EIDE. Satellite Pro 2100 comes with disk HARD Enhanced IDE (ATA-5).

    Good bye

  • Update BIOS on Satellite Pro 2100

    Hello

    I have a Satellite Pro 2100 (model #: PS210E-0053R-EN) and recently bought two 256 sticks of RAM for it, which according to the manufacturer, are compatible. They do not work, and I have I'll return them, but before the company was asked to take certain measures, i.e. to retest them and also update the Bios. I have never updated a BIOS before and am a little worried about something bad, or choose the wrong update.

    No one knows who is right on the section of the site? I know there's a Satellite Pro 2100, but which is compatible with all the models of this laptop?

    Thank you.

    Hello

    Satellite Pro 2100 comes with two different processors (cel or PIV) but the model number is the same (PS210E). This means that you can use the update of the BIOS for both models.

    I recommend you do traditional BIOS update using the floppy drive. As described on the page of the Toshiba BIOS update, it is very important that you refer to the Description of the Toshiba BIOS update before you continue.

  • Need new driver NVIDIA for my Satellite Pro 2100

    Hello

    Anyone know if there is a newer version of the NVIDIA graphics driver that comes with the satellite pro 2100? I looked on the Toshiba downloads section and on the NVIDIA site, I have not had any look to find everything. They simply stopped updating this driver?

    Any help will be thank you very much and I do a search before posting, but haven't found anything.

    Thank you

    Hello Steve

    Satellite Pro 2100 is fairly old unit. It is about 6 years old. Graphics card is NVidia GeForce4 420Go with 16 MB of memory only. Now the question: do you really want that Toshiba should support unit of 6 years with the latest NVIDIA driver? Please don't be crazy on me, but I really don't understand what you expect.

    A more interesting question to me is: for what purpose you need new driver? You want to use with newer games, or maybe you some graphic problems watching movies DSVD?

  • Satellite Pro 2100: Yamaha its driver problem & screen is sometimes black

    Hi guys,.

    I have Toshiba Satellite Pro 2100, SP2100 model No: PS210E-005ES-EN.
    Supposed to this laptop be designed for windows XP like the manual said: ok.
    I am facing two different questions must solve individually.

    The first is the audio, after formatting install a new copy of windows XP Pro, installed all Toshiba drivers, all the sums 2008 pilots, selected according to the model No, each driver installed fine except for yamaha ac - xg wdm.

    Whenever I try to install I get only "driver not installed" at the end of the day, I tried loads of other drivers designed for ac - xg wdm. Without success, when I go to Device Manager I only see "unknown device" which is the sound card, I guess that...
    Also updated BIOS updated to the latest version...

    The other problem is that the laptop is unable to send the signal to the screen; sometimes completely dead except the green light before.
    Also, I noticed that when it is off the battery light stays on but slightly dim... have to remove the battery, Plug and unplug the unit to be able to operate... processor reinstalled, pasted with white heatsink, no obstruction stuff... etc...

    We wish you all Merry Christmas...

    I forgot to say that I also tried to point to the diver manually, Setup goes very well, then ask yacxgc.sys.
    Although this file is located in the folder downloaded with the driver of toshiba cat but not accepted, when you point to does show ' file to select t...

  • Satellite Pro 2100: TEAC CD drive problem - cannot access CDs

    Hey

    I got my Satellite Pro 2100 for another few years.
    So far it has worked well.
    However, now the cd player is always displayed the yellow light just after trying to load a cd, followed a quiet thump. This means that I can not access the content of the cd (audio or data).

    The drive is still recognized by Device Manager, and I'm told it works well - I know better however, it most certainly isn't! the drive will still appear in my computer, and I can always try and discover the contents of the cd inserted, which is always empty!

    Ant help or advice would be most appreciated, because I really want to re-preparation of the system!

    Hi Simon

    The satellite Pro 2100 is an oldie ;) and I guess that you pointed out the CD/DVD drive all the time long.
    I would not be surprised if this player is dead. For me, it looks like the end of the device.

    Until it must be said that I'm afraid you need to replace the CD/DVD drive with a new m.

    Best regards

  • Satellite Pro 2100 - what HARD drive do I need?

    Hi all,

    I just got a Toshiba Satellite Pro 2100, but the hard disk has been removed for the protection of the data. Now, I don't know what type of HARD drive, I have to get PATA/SATA?
    Can a little help if you please?

    Hello

    You can buy this store on the computer HARD drive because it has an IDE interface. You can t use a HARD drive with the new SATA interface.

    So I agree with Akuma. Already, I think that everything is written here.

  • Satellite Pro 2100 - Exchange optical drive

    Hello!

    I m a proud owner of a Toshiba Satellite Pro 2100 (1.9 GH). Already done HDD Upgrade (as already said) of 250 GB and 512 MB RAM upgrade.
    Now, I want to upgrade the DVD-ROM in a DVD burner. I heard the fact, slimline drives are jumperset by the firmware, not the real riders.

    Can someone tell me weather I need to buy a "rider" master drive or a slave - drive "rider"? Or is it possible to replace the drive with a cable-select-disk?

    Toshiba-readers are always 'closed' to enter computers laptop toshiba? All the optics of toshiba notebooks readers bridge the same?
    Would be happy to receive some answers :-)

    L0nestar

    Hello Lonestar

    AFAIK all optical disk drives cannot be used with all portable models. There must be a difference with assignment of pins. Because of this, you must use only compatible disks. I have the same info as you. All readers are already "closed."

    I checked the user s manuals document. There are several compatible with your model of laptop sides, but none of them is DVD burner. It can be really hard to find the compatible DVD burner.

  • Satellite Pro 2100 jumps down and now demand HARD drive password

    Hello world

    I have a Toshiba Satellite Pro 2100. I have some problems when you access the Internet; When I start the Internet, there is no problem, but when MSN messenger start the laptop goes down and I have to turn off manually the laptop. This would be a kind of firewall?

    Last Sunday, this problem occurred when using Skype; But now the computer has completely collapsed. The system first asked "inserting a disc system. I didn't know what they meant, so I turned off the computer a few times manually to see if it would disappear.

    When I turn on the laptop, Windows will not start upward and the system asks a black screen "the password HARD drive". Does anyone know what this means and where I can find it? And means that my laptop is dead, or am I able to fix? Can someone help me?

    Thanks in advance!

    Marjolein

    Post edited by: leiniexxx

    Hello

    I know, it's the HARD drive password cannot be deleted.
    If the HARD drive password has been activated and you don t know the password for the HARD drive, then you will not be able to use the HARD drive more. :(

  • Help identify the Satellite Pro 2100 download driver

    I have a Satellite Pro (marked below as a PS210E-00C3G-EN and a P4 2000/256/30 G, 15XT, CDW, LW). I think it's a satellite Pro 2100, whatever.

    Problem I have is that when it comes to downloading the drivers, I can't find anything approaching this model of the selection process. I've searched the forums and there's not much on this machine otherwise than in this one, so I was hoping someone could help me identify this machine especially for driver downloads... Yes, guess who has reinstalled Windows XP without checking I had all the specific stuff Toshiba tucked away first?

    For now, I have a load of things works without drivers, and it is not at all optimal...

    Thanks in advance

    J

    Toshiba European driver on this page;
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

    and choose;

    The Satellite Pro Archive Satellite Pro Satellite Pro 2100 21xx archives *.

    Then you will find all drivers available for this machine Toshiba ;)

    Good bye

  • Problem with the Satellite Pro 2100 and new modules of RAM

    Hello

    I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
    My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
    Here is the code of the modules:
    KTT3614/256 (original)
    KVR266X64SC25/256
    256 MB pc2100 both.
    Starting the PC with any of them, as well as the modules are both compatible.

    Any ideas?
    (Sorry for my English but I'm Italian: D)

    Post edited by: DaK_TaLeS

    Hello

    the second location of memory perhaps is the problem.
    Try to start with a module in the second slot, first an empty slot.

    Good bye

  • With a Satellite Pro 2100 wireless network connection

    Even though my work laptop has a switch (power) wireless and DIRECTED on the side (under the floppy drive), it does seem to pick up a wireless connection, or have wireless options on the corresponding section of the control panel.

    Is it a hardware problem (that is to say he is ready wireless, but has not installed) or a Windows problem?

    Thank you

    Hello

    The WiFi card is optional on the Satellite Pro 2100.
    In this case, it is possible that your device has all switches but no card WLan.
    I recommend you to check the Device Manager. There you should find the WiFi card network card is installed.

  • Satellite Pro 2100: Quick fix does not work with Win XP SP2

    pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
    Are there drivers for Windows XP service pack 2?

    Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

    When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

Maybe you are looking for

  • Trash no longer works after the RAID

    Title pretty much everything said. I have an old 'Tower' MacPro and I just put two internal disks in RAID 1 using the terminal in El Capitan. Whenever I put something in the trash, it gets deleted immediately (with a warning from the Finder). How can

  • SMTPEmail changes LabVIEW2013

    I used the vi SMTPEmail email a copy of Θcran in my code LabVIEW 7.1.  Does not work in 2013 of LabVIEW.  You want to know if there are changes in the way that vi works in 2013 before code I listen my IT people.  Does anyone out there use this vi?

  • What is the best video player for iconia a1 810

    I can't play a vob or iso file then, what is the best video app

  • problem with secure access

    Recently, I buy a scandisk 4 GB USB key.  It came with secure access software.  I failed and eventually remove the software.  Then I downloaded the software to access secure on my USB key.  I got the arch in place.  Then I closed it down.  Now, whene

  • Play a record of a Question NAS200

    IM thinking of moving from a NAS200 to one of the newer models with Gigabit. Can I move drives of NAS200 for newer models without having to reformat? Jorge