Satellite pro 2100 only works on battery.

Similar Questions

• Can I get my satellite Pro 2100 high-speed USB 2.0?

  I have a new MP3 Jukebox that can operate at USB 2.0. Do anything to get my Satellite Pro 2100 to work at speed 2.0 that it currently only works with USB 1.1? Sorry, but I'm not very technical.
  Hope someone can advise me
  See you soon
  Bob

  Hi Bob

  The best solution for you is to buy a PCMCIA USB 2.0 card. As far as I know there are cards with two or four USB ports. This card is not expensive and the installation is not complicated.

• Toshiba Satellite Pro 2100; battery (probably) problem

  About a year ago and a half year I bought the Toshiba Satellite Pro 2100. Every thing worked perfect up what a month ago, and then my adapter not workt more. With a multimeter I discovered it was broken, so I bought a new (from you guys)

  But 2 weeks later a new was also broken. Then I used my father's map (it has the same specifications) which merged in 1 week.

  What is going on? Where is the problem. I think it's my battery.

  Hello

  It seems that your adapter is damaged by the oscillation of voltage.

  I can't image the laptop that has the same voltage as the AC damaged HQ with a swing of voltage!

  IF you wish, you can contact a Toshiba Service partner. They can check the power supply, I have the laptop and HQ.

  Bye Bob

• Satellite pro 2100: System can not recognize battery

  Hello!

  I have a problem with my Toshiba Satellite pro 2100, after the upgrade to Windows XP Pro with Service pack 2, my computer is anable to recognize the battery. I also reinstalled Toshiba powersaver drivers on the CD and nothing is better.

  I can work on my computer normally, but it's awful when it sudddenly shot without saving anything when the battery is completed.

  What can I do? Thank you all.

  Blaz

  Hello

  Can you please check under Control Panel Power Options Properties power meter is an indication of the capacity of the battery.

  Also check the settings in Toshiba Power Saver. Under energy-saving Modes, it is running on batteries go Normal, and then click details. Check all the settings in power saving Mode.

  If your problem persists, please write again.

• Need to find the cmos on Satellite Pro 2100 battery

  I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  The brand is a Satellite Pro SP2100, model PS210E006P9-EN number, but I can't find this brand/model on the Toshiba site. The closest I can find is Satellite 2400-103, part number: PS240 - T 014, 1, that seems identical.

  I tried to use the identify tool of Toshiba to detect what is the laptop, but that fails to provide results.

  I also need to find out what food is for this unit as the current is defective and exposed wires.

  The adapter of current with her is PA3201U-1ACA, the problem is that this card has another card on the end to fit the power plug to the back of the laptop. The connector at the end of PA3201U is too thin to fit.

  Hello

  This laptop is very old and the name of this machine is: Satellite Pro 2100 PS210E

  > I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  Usually the CMOS battery can be charged. You must connect the power adapter and the laptop must be powered for about 12-14 hours.

• Media buttons do not work on my Satellite Pro 2100

  On my laptop Satellite Pro 2100, there are 6 buttons of media on the edge of it. I can't make them work. Any ideas? I have wmp11 when I press on them, nothing happens no break or anything cud anyone help me please.
  Thanks in advance.

  Jamie Holmes

  Hello

  Reinstall Toshiba common modules first and then the Toshiba utility controls!
  The necessary drivers and tools that you can find on the page of the Toshiba driver.

  Please return after installation and report your results.

  Good luck and see you later

• Damaged on Satellite Pro 2100 battery cover

  Hello

  My battery of Rabat (outside) is damaged, then, my battery is not stuck.
  Anyone know where I can find a new?
  The laptop that I use is a Satellite Pro 2100.

  Thank you

  Hello

  I guess I mean the plastic cover at the bottom of the unit.
  Well, I agree with Flo.
  You must contact the ASP in your country. Here, you can order the necessary part.

• Satellite Pro 2100: booting from a CD are works not

  Hello

  In our company, we use BartPE boot disk to get on the network of the company, from which we can then use Norton Ghost to the image of our PCs and laptops. It works really well. However, I have a Toshiba Satellite Pro 2100 who refuses to read any bootable CD. Will TRY to read the disc, it simply cannot.

  I can hear it try over and over again, but it just doesn't work. I tried to write by using different media and different CD burners, ranging down to write at a speed of 8 x, but nothing helped. Is there a problem known with the reading of the CD - Rs on this beach or model?

  Tim.

  Hello

  To boot from the CD, you can press the C key immediately after starting the laptop.
  In addition, it would be very interesting to know if it is also not possible to boot from the Toshiba Recovery CD.

• Satellite Pro 2100: Quick fix does not work with Win XP SP2

  pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
  Are there drivers for Windows XP service pack 2?

  Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

  When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

• Satellite Pro 2100: media control buttons do not work

  Hello friends,

  I have a Satellite Pro 2100 on EBay and it is very good, but my media keys Play/forward/reverse fast/Stop/6CD have no Funktion Audio Player installed what is the problem?

  I need help...

  [email protected]

  Andy from Germany

  Hello

  Check if the controls of TOSHIBA is preinstalled on your device. It should be included in the Panel.

• Satellite Pro 2100: is it possible to upgrade memory 1 GB?

  Hi sat 2100 and looking at 1 GB but laptop reconises only 512 meg and wont work at all with 2 x 512.
  Would be a bios update help?

  Thank you
  Steve

  Hello

  According to this site about Satellite Pro 2100 memory, the laptop supports 512 MB max.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7444&ft=m&St=3

  It is the maximum value that can be used in the notebook.
  The BIOS will not help because it is a hardware limitation of motherboard!

• Satellite Pro 2100: Yamaha its driver problem & screen is sometimes black

  Hi guys,.

  I have Toshiba Satellite Pro 2100, SP2100 model No: PS210E-005ES-EN.
  Supposed to this laptop be designed for windows XP like the manual said: ok.
  I am facing two different questions must solve individually.

  The first is the audio, after formatting install a new copy of windows XP Pro, installed all Toshiba drivers, all the sums 2008 pilots, selected according to the model No, each driver installed fine except for yamaha ac - xg wdm.

  Whenever I try to install I get only "driver not installed" at the end of the day, I tried loads of other drivers designed for ac - xg wdm. Without success, when I go to Device Manager I only see "unknown device" which is the sound card, I guess that...
  Also updated BIOS updated to the latest version...

  The other problem is that the laptop is unable to send the signal to the screen; sometimes completely dead except the green light before.
  Also, I noticed that when it is off the battery light stays on but slightly dim... have to remove the battery, Plug and unplug the unit to be able to operate... processor reinstalled, pasted with white heatsink, no obstruction stuff... etc...

  We wish you all Merry Christmas...

  I forgot to say that I also tried to point to the diver manually, Setup goes very well, then ask yacxgc.sys.
  Although this file is located in the folder downloaded with the driver of toshiba cat but not accepted, when you point to does show ' file to select t...

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Satellite Pro 2100 is really really slow running

  I have a satellite pro 2100 I killed a friend.
  He said his brother gave him and that he had no idea what was wrong because he didn't have a chance to watch it.

  I put windows xp pro top and used the bottom of the laptop pro license key.

  but the laptop is really really slow.
  It may take up to 5 minutes for nothing I click to open up.

  the strange thing is the laptop works fine in safe mode, can open things like I should.

  but in normal windows mode, it slows down to a crawl and even crashes.

  I have trie all to my knowledge.
  I even uninstalled and turn off the graphics drive that I thought that he maybe, but he always does.

  I tried multiple copies different from xp pro and even tried a copy of vista, but still the same.

  He had 2 different lots of tried in ram, 2 sticks was new aswel. I tried 3 different hard drives and still the same.

  My thoughts are that the integrated graphics card is exhausted.

  can anyone else confirm this? Certainly this isn't a software issue because I tried a few different copies of xp and vista. IM about to bin it now.

  > anyone can confirm this?
  Don t think someone could confirm everything that is related to a malfunction of the equipment.
  Here in the forum, we can talk about problems and makers of disorders, but no one will be able to say with certainty what's going wrong here.

  First laptop computer is an oldie.
  The Mobile Intel Pentium 4 CPU, isn t a up to date CPU and in my opinion, that don't expect too much performance.

  I put t know how this camera supports memory but everything below 1 GB of Ram would be good enough to the smooth running of the laptop.

  However, given that the unit works much faster saving mode, I guess there must be a hardware related problem.

• Satellite Pro 2100: TEAC CD drive problem - cannot access CDs

  Hey

  I got my Satellite Pro 2100 for another few years.
  So far it has worked well.
  However, now the cd player is always displayed the yellow light just after trying to load a cd, followed a quiet thump. This means that I can not access the content of the cd (audio or data).

  The drive is still recognized by Device Manager, and I'm told it works well - I know better however, it most certainly isn't! the drive will still appear in my computer, and I can always try and discover the contents of the cd inserted, which is always empty!

  Ant help or advice would be most appreciated, because I really want to re-preparation of the system!

  Hi Simon

  The satellite Pro 2100 is an oldie ;) and I guess that you pointed out the CD/DVD drive all the time long.
  I would not be surprised if this player is dead. For me, it looks like the end of the device.

  Until it must be said that I'm afraid you need to replace the CD/DVD drive with a new m.

  Best regards