Satellite Pro 4200 recognize RAM only in the B slot

Similar Questions

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• I need BIOS update for Satellite Pro M70 (PSM75E), but only for the BACK

  Hello world

  Help me!! I'm looking for driver for BACK Bios M70. Does not exist, only for windows and my cell phone is dead.
  Bad news, because after 3 minutes, stop!

  So I have only one solution (with the diskette bootable cd).
  So I need the dos version of the Bios

  Thank you

  This version is not available on the official support page so only one chance to get it is to contact Toshiba service nearest and ask for help.
  Sorry, but I don't see another option for traditional BIOS.

• Versions of BIOS and upgrades for Satellite Pro 4200

  Hello

  I have search on the Toshiba site, but is no reference to the BIOS information for Satellite Pro 4200 systems (or one of the machines non - letters). can someone point me to where I can see if my BIOS is the last (v2.7) and the location on the site Web BIOD'ZYL downloads.

  See you soon,.

  Jon.

  Hello

  BIOS downloads are found here.

  Enter the BIOS settings at first upward and check the version of the BIOS. You should be able to find it.

• The maximum size of HARD drive the BIOS sees in Satellite Pro 4200 and 4300 series systems

  I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.

  I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.

  Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?

  What is the largest swap HDD that someone did with success on these machines of 4200/4300?

  Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.

  By the way: 60 GB HARD drive is not sufficient for you?

• RAM upgeade to Satellite Pro 4200

  Can anyone confirm which is the size of the ram max and slot configuration for my sat pro 4200 please? Currently there 196 016 KB and I want to increase. Some sites show it has 320 KB max e.a. 576 KB.

  Thank you

  Gardenswing

  Hello

  I didn t find info on Satellite Pro 4200, but I know with certainty that Satellite Pro 4220 can scale up to 320 MB max. The two laptops are identical, and I think that this info is also valid for your laptop.

  Module 128 MB compatible a part PA3005U - 1 M 12 number.

  Good bye

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• What is the difference between the Satellite Pro 4200 and 4300 series?

  As mentioned in another thread, I have a SP4220XCDT that died on me.

  I bought a mobo on ebay which was a 4290 and today it happened, but the problem was that there was an apparently fixed CPU, which stands out much less of the Council than that of the Board of Directors 4220 and therefore does not connect with my 4220 cooling mechanism.

  At least something comes on when I start now, but unfortunately he has passed the Toshiba screen that tells you to press F2 for boot sequence.

  Having also spent money on a new CPU and memory, I don't want it let go and I've seen a motherboard available suitable for a 4320/40/60 - does anyone know if it will agree with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the motherboard 4220.

  I'm assuming that these may be compatible since I managed to find a pdf of a service manual that covers both the 4200 and 4300, although unfortunately the first page is missing, so I don't ' know if that highlights any differences.

  It's frustrating that there's no PDF for these older models, at least with the plug on them, and it is very difficult to find info.

  As usual, thanks for any help!

  Hello

  As far as I know the two series using the Intel Mobile Pentium III with MMX microprocessor? Technology.

  I discovered these details:

  Satellite 4260 series: Mobile Pentium III 450 MHz
  4270 satellite series: Intel Mobile Celeron 500 MHz
  Satellite 4280 series: Mobile Pentium III 500 MHz

  Satellite 4320 series: Mobile Pentium III 600 MHz with Intel SpeedStep technology
  Satellite 4340 series: Mobile Pentium III 650 MHz with Intel SpeedStep technology

  Portable measures should be also the same. So in my opinion, it should be possible to use the same motherboard for Satellite Pro 4200 and 4300.

• Satellite Pro 4200: need to know what software is running the Cd/DVD burner?

  I recently bought a laptop satellite pro 4200 (new to me) and can't understand what program will run the burner.

  Anone help?

  If I understand correctly you are looking for the application software / who could burn CDs. Am I right?

  Well, I use the Nero burning rom software. It s really great program with different characteristics.

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• Satellite Pro A200 - new RAM work together

  Laptop Toshiba Satellite Pro A200-PSAF1A-003002, I bought the year last with RAM 2x512MB that I try to update my 3 GB RAM and I bought 2 RAM KTT667D2 / 1 G & KTT667D2 / 2G Kingston memory.

  I added that the 2 strips of RAM in the laptop, but it does not start. The power and the drive lights and flash for 3 times everything off. No boot. But I remove one of the sticks of RAM and it starts very well and the RAM has been upgraded in the system.

  I tried with the sticks and the two slots to remove 'bad slot' ideas and a stick of RAM works in a thin slot. Paste works in slot 1 or slot 2 and stick b works in slot 1 or 2, but not both at the same time. Is it simply a setting I'm missing somewhere? I checked the BIOS version is 1.7, I need to update my BIOS? Help, please

  Thank you
  Yana

  I think that the modules are not compatible together and that is the reason why each module works in each slot.

  Did you buy KTT667D2/1 and KTT667D2 / 2G. Different modules of s and are not working together.
  You should buy only the modules with the same specifications and capacity (for example, 2x1GB and 2x2gb).

• Satellite Pro 4200 - need help for Windows 95 & drivers!

  Hello! Years ago my mother, I bought a fully functional, great Toshiba Satellite Pro 4200 working the place taken sales... Since that day, my laptop has not been used. But now, I found a few games nostalgic childhood of mine, who works only with Windows 95. I wanted to play, and I decided to install Windows 95 to my laptop. The installation process went well, it was a bit complicated at first because of the startup disk and such. But I managed to install a working fully Windows 95 in my laptop! But it gives me only 16 colors and no option to choose the resolution! So I found out that I need to install the video card drivers.

  I have google a bit and discovered that my laptop has chart S3 Savage IX. I failed to find the appropriate drivers for it. Until I went to your site to support canada and traveled for a pilot of similar laptops. I found Windows 95-98 compatible drivers for my card. The installation process was easy, is well past and fine! I then could choose 256 colors and another resolution (which I did not actually change...). I changed the colors and then restarted. Everything went well until windows 95 logo screen came suddenly to the top and after that I only saw colors and black borders. He did not start Windows properly. What can be wrong? At I have download the wrong drivers? Windows told me 2 different versions, IX and MX. I tried them both. Tried to change the Hz also, but nothing helped. Please help me!

  Thanks in advance,
  Jupstejuho of Finland.

  P.S Sorry for my bad English...

  Edit: OH, BTW is the exact version of my OS: Microsoft Windows 95 Finnish b with USB support (I Don t know the version very very accurate actually... but I just mention that it is version B of the operating system.) Could this be the problem? I also tried the same driver downloaded from toshiba europe Web site, but it won't let me just install the drivers 'already installed' and they really are. I did not uninstall them, I tried to run the uninstall utility, but it doesn't work...!

  Post edited by: jupstejuho

  Hello!

  Maybe chose a resolution not supported?
  This happens to you at all resolutions, or only one?

  Normally, you can download all the drivers on the European site of Toshiba, but I only find Satellite Pro 4220, 4240 and so far but not 4200.

  However, have you tried to do a BIOS update?
  Before installing the graphics driver, you need to update the version of DirectX.
  You can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• Speed, basic low/Satellite Pro 4200 Series

  According to the computer laptop manual processor is a pentium III E 500 MHz in my computer laptop satellite pro 4200 (operating system: Windows XP Home Edition). Check the speed of scoring with the CPU software - Z it detects only a few 250 MHz base speed! How to increase the speed of 500 MHz base?

  Hello

  If you check the speed of the processor in the intelligence tool, there to the maximum?

• Satellite Pro 4200: Which is a maximum size of HARD drive?

  Hello, please help. I have a satellite Pro 4200 with a dead hard drive. I can't get a 10 GB hd anywhere. I can only find 30 and more. Does anyone know the size max HD which can be installed in this system? send me an email: [email protected].
  Thank you.

  Hello Jose

  Unfortunately there is no public document on this subject. I'm sure that 20 GB HDD will work correctly. If you want to try to call service partner and ask them. They must have this information.

  By the way: as far as I know Toshiba doesn't support the hardware upgrade. This is supported by authorized service partners or independent equipment parts supplier.

  Good bye

• My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  After turning on if it passes the test post and enters the menu grub (Linux + Windows) or BIOS
  without problems, but most of the time after the start of the BONE found in the start - up, suddenly it powers off the power.

  The problem becomes bigger and bigger as punishment I can boot any operating system

  As seen on messages more soon as I cleaned the vents of CPU with a spray suddenly sure I wasn't a problem of overheatting.

  Someone has an idea of what can happen?

  Thank you

  Hmm, the laptop passes the MESSAGE correctly and it stops during the initialization of the operating system. Is this good?

  Well, in this case I would exclude the RAM to malfunction.

  I put t also think that it's an overheating problem because the laptop should work a little longer until it would be closed due to high temperature.

  What about the HARD drive malfunction? Are you sure that the HARD drive is ok?

  In my opinion, you should check the HDD and maybe try another.

  Welcome them