Satellite Pro 4340 xdvd, upgrade to Windows XP

I would like to install windows XP on my PC Pro Satellite (currently I use Windows 98 SE), in what order should I install the drivers? Is there any service Windows XP upgrade pack? How can I get?

Hello sundevil!
As a first step, it would be intresting what Satellite Pro you ;)

Tags: Toshiba

Similar Questions

  • Satellite Pro 4340 xdvd, Greek characters for windows 98 SE

    I bought a satellite pro 4340 xdvd 4 years in the United States and I had windows 98 SE on my laptop, I want to add some Greek characters to run a Greek technical program this patch windows 98 do I need? where can I download that?
    any help is appreciated

    Hello
    I found two very interesting help for you links. Have a look here-> http://www.hri.org/fonts/w95/ or here-> http://www.perseus.tufts.edu/Help/fonthelp.html.

    Hope that was helpful!

    Good bye

  • Satellite Pro 4340 - RAM upgrade problem

    I have exactly the same problem as Juan29. Link to his post below.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15837&MessageID=57907

    I want to improve my Toshiba Satellite pro 4340 to 320 MB of ram.
    The computer came with 64 internal RAM and I bought 2 x 128 MB of ram.

    My problem is that the second (B) ram slot does not detect the new ram.
    2 x 128 MB of ram were tested both in the ram slot (A) and work.
    I thought that a bios upgrade would solve the problem, but it didn't.

    I have the same defective (B) housing like Juan or does it have
    a solution?

    Help, please.
    Best regards
    Martin

    What memory did you use?
    I've found that these modules are compatible:
    PA3003U - 1 M 03 32MB MEMORY KIT
    PA3004U - 1 M 06 64 MB MEMORY KIT
    PA3005U - 1 M 12 128 MB KIT MEMORY

    I think there could be a problem of compatibility of the module.
    I put t see any other reason the problem

  • Satellite Pro 4600: how upgrade to Windows XP?

    Hello
    Someone gave me an old Satellite Pro 4600 which works very well with Windows Millennium, but this person lost the Toshiba CD with drivers and utilities. I can't find anything about Toshiba hard disk.
    Is it possible to upgrade to WIndows XP? I have the Windows XP Pro CD, but nothing for the drivers of Toshiba.

    Of course you can improve it to Windows XP Home edition.

    I checked the download page of Toshiba under http://eu.computers.toshiba-europe.com and it has listed many drivers of Windows XP Home edition.

  • Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

    Hello world

    I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

    Anyone know if it is a driver problem or nobody knows how to solve this problem?

    Thank you

    Drew.

    Hello

    You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
    Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

    Can you confirm that FN keys work with installed VAP?

  • Satellite Pro U500-1DK - upgrade to Windows 7?

    Everyone has lowered the note a Satellite Pro U500-1DK for Windows 7 32-bit?

    If so, were all the drivers available?

    Hi jazzydog,

    I guess you want to do a downgrade to Windows 7 64 bit for Windows 7 32 bit. Right?
    Well, the question is why you make such a downgrade because 32-bit is more obsolete because it supports only 3 GB of RAM.

    Satellite Pro U500 belongs to the series of PSU9CE and are therefore no drivers on the official page of Toshiba. So in my opinion, you should always use 64-bit Windows.

  • Satellite Pro P300 - 18Q - upgrade to Windows XP

    My colleague is about to buy a new laptop Satellite Pro P300 - 18 Q and asks me to perform the downgrade it to XP.

    Are there instructions with the machine on the way to do it. ?
    I know that it comes with Vista and XP Professional as recovery on DVD media.

    Any information would be much appreciated. Thank you

    Hello

    If this laptop comes with Windows XP Home edition recovery media, I don't understand why ask you the next question. Your colleague can decide which operating system they want to use. If he wants to use the Windows XP using WXP home edition recovery media and install the Windows XP Home edition operating system.

    Someday, if he wants to use Vista, it can install it using sent Vista recovery image.

    I hope you understand what I mean.

  • Audio driver for Satellite Pro 4340 Windows XP

    I tried an audio driver for my Satellite Pro 4340 Windows XP, but still I can't find a. I know this is an old model. Y at - it still a sound driver for this model YMF744b DS-1 Audio which is Windows XP. Please help me find an audio driver.

    Hello

    I think you might find the drivers on the European driver Toshiba page
    But unfortunately; the XP drivers are not availbel for this good old classic;

    However, you should look for in the area of the ARCHIVE.

    Check the driver page and choose:
    Archive-> Satellite Pro-> 43xx Pro Satellite-> Satellite Pro 4340

    It seems that the sound card chip is Yamaha...
    Google for maybe audio driver Yamaha that you will find something.

    Welcome them

  • Satellite Pro 4340 is compatible with Wlan?

    my friend has offered its satellite pro 4340 for my work to a level of children. I need to connect to the internet on this subject. what I'd like to know is: is - this compatible with the radio? If I bought this wireless could it be plugged in and used? is this a laptop useless? I have no IDE on computers

    Hello Wendy

    I found some info on this unit, and I'll try to give you some advice on its use. First be sure the unit is in good condition and it starts. This unit is initially shipped with Windows 98SE. According to RAM, you can also use other operating systems.

    Please talk with your friend and ask him which OS is pre-installed and the amount of RAM is here. Maybe someone can give you some useful tips on more operating system installation or how to use it in the best way.

    This laptop is definitely not pointless and it's very good for children and they can use it to learn more about the use of the laptop and also how to deal with operating system (basic knowledge).

    Computer laptop itself has no wireless card but you can use the PCMCIA WLAN card. To find more information please contact your local dealer to PC. They can give you important information about compatibility, and you can also ask them to install the device and also test in store for you.

    If I forgot something please ask again and make your friend under pressure with price. ;)

  • Satellite Pro 4300 - memory upgrade problem

    Hello

    I know that the issue has been already discussed several times, but it seems that none of the solutions or suggestions posted earlier apply to my situation.
    I recently bought an old Toshiba Satellite Pro 4300. The laptop has a slot filled memory of 64 MB module of the system's total memory was 128 MB.
    Because in my opinion, the system has worked to slow down, I decided to buy an additional memory module. I bought 128 MB - module TOSHIBA PA3005U k and placed in the slot B

    I was very surprised when I found that, after the upgrade, Windows showed that the total memory is 192 MB.
    When I put the 128 MB in the slot module is and the old module of 64 MB in the slot B - the surprise was even bigger, given that windows showed only 128 MB.

    I first thought that the slot B is defective, but in this case, it would be impossible to get in the first place the 192 MB. Then I thought that the new module of memory was either defective or it was 64 MB instead of 128 MB, but this option is also likely, according to my observations. Furthermore, I checked with EVEREST software system and it recognizes the new module as 128 MB module, but does not see the old 64 MB module.

    The situation is quite strange. Does anyone has an idea whay happens?

    Kind regards

    Sebastian

    To my knowledge, the 4300 Satellite Pro can be upgraded to 320 MB max.
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5769&ft=m&St=3

    64 MB module which was fitted with your laptop should not be removable.
    So in this slot ONLY this 64 MB module could work properly.

    I know it's strange but the computer world is sometimes strange ;) you know :D

    Greetings

  • Satellite Pro 4340: How to get older versions of BIOS?

    Hello

    I have a Satellite Pro 4340 and I recently updated the BIOS from v2.6 to v2.7 unfortunately since then randomly, the laptop freezes and requires a reset. Check the error log indicates a fault in which case the ACPI BIOS is written in an unauthorized area. I would now go back to BIOS version 2.6, however the support from Toshiba site only lists the current BIOS v2.7 and not the older versions. How can I get the old version? Anyone here happen to have a backup?

    Thank you

    Ben.

    Unfortunately, to my knowledge, you will find only the most recent update of the BIOS on Toshiba page.
    I don't think that the authorized service provider is able to downgrade the BIOS to the original version

  • DVD writer internal necessary for Satellite Pro 4340

    Hi everyone has found a suitable DVD INTERNAL burner (preferably double layer) which adapts and will work in a Satellite Pro 4340 or a laptop of the 4200 series? No answers please tell your machine is too old, etc. - they are not useful. I only want to hear from people who actually know something useful or have a direction helpful to direct me in - but please don't say no 'contact your service partner' or I'll get out you my hair! See you soon

    Hello

    There is no internal DVD burner for this camera! It is a SIMPLE fact. He must accept it.

    Only a DVD - ROM drive or a CD - RW drive is available by Satellite Pro 4340.
    I won't say that you will need to contact the ASP because you won't get it.

    On this page: you will find many devices and parts compatible with this device.
    http://www.sparepartswarehouse.com/DeviceType-vendor-modelline-modelseries-partList.aspx?DeviceType=0&vendorlevel=ModelSeries & modelseriescatid = 68721 & partcatid = 0 & filter = 2

    If you wish, you can use an external solution.

    Best regards

  • Satellite Pro 4340: need driver sound

    Hi people,

    I need to for the Toshiba Satellite Pro 4340 * Sound Driver *, please!

    System: Win Server 2003
    Sound card: + Yamaha Native DS1 Audio Codec +.

    (I'm loking on google but without suxes).

    better compliance

    Hello

    I put t know what OS you have, but all the available drivers are located on the European driver Toshiba page.

    There is a zone of ARCHIVE. Looking at this place!

  • Satellite Pro 4340: Wireless connection problem

    I can't connect my sons Satellite pro 4340 using a belkin preN wireless card Belkin router to take are there problems that I need to know or anyone could do that?

    Hello

    Well, if you want t use WiFi, you must pay attention to the different settings and options.
    First of all, are you sure that you have installed the wireless network card correctly and it appears in Device Manager 100%?
    Please check!

    After the properly installing the LAN on laptop computer card, you must configure the WLan router.
    For most installation instructions delivered with the package and you will need to follow these guidelines!

    For the first time, I would not recommend to set of ciphers.
    You must first test the connection without encryption, and if it works then you can allow it.

  • PCMCIA card does not recognize the connection to the local network on Satellite Pro 4340

    Hello world

    I have 2 Satellite Pro 4340, running Win2K, SP4. I bought a card PCMCIA 10 / 100MB of Ultron (more or less no name :-))

    When you insert the card, Win2k recognizes the card, but when the I plug the network cable, it does not recognize the connection. Cable is fine. It seems there is no power on the PCMCIA card. I read on some forums that there is a problem with the Topic100 Card Bus driver and voltage. I see that many people have the problem but not where to find the driver for the problem :-/ I couldn't find a driver on toshiba support site. A

    ll have an idea, or better a link where I can download this driver? Any help is appreciated and thanks in advance for your help, support and answers.
    Corey

    If this card needs a driver you will not find it on the download page of manufacturer of portable. You must check the card producer site.

    As you know in the world of computers, it has set different standards. Produced very often cheap are not designed for these standards, and you can have different problems. I recommend you to use high quality products.

Maybe you are looking for