Conversion of a VI that uses OR-DAQ traditional to NOR-DAQmx

Similar Questions

• NOR-DAQ traditional to NOR-DAQmx

  I am a neophyte of LabVIEW.  I inherited a previous employee long gone from the company, so that I work a LabVIEW project.  The project has been written using NOR-traditional DAQ and I need some update OR-DAQmx so that it is 64-bit capable.  Of course, I ran into trouble with the VI first that I try to put in level.

  This VI was built with LabVIEW 2011 SP1 and I need to replace the Config AI, I start, I Read, Index channel, control and HAVE clear screw with their equivalents of NOR-DAQmx.  Upgrade to SP1 2013 LabVIEW is possible if that makes things easier.

  Now here is the tricky part.  I want to keep the terminals on this VI even if possible.  This VI is used in several places and a few different programs and I want to make the change as minimally invasive as possible.  If possible, I want the changes must be made within this VI.

  I am looking for any help and or advice. Thank you.

  First, abandon all hope to keep the same connector components.  It is possible, but it's foolish to try. (Just trust me, OK?)

  Read these articles in the knowledge base

  http://www.NI.com/white-paper/3021/en/

  http://www.NI.com/white-paper/4342/en/

  What you're trying requires skills usually not developed in a neophyte of LabVIEW. (And you start with the 'Spaghetti' code - this is not 'Fun') Do an internship of audit and meet with your representative local of NOR.  Chances are that some local expert advice will point you away from some serious mistakes.

  Take care

• Using the DAQ USB-6009 meter and an analog input voltage at the same time.

  Hello

  Currently, I'm reading the two channels of voltage with the USB-6009. It happens that one of the channels is the output of a digital coder, and it would be much easier to use it directly to the PFIO entry that is defined as a counter. The problem I am facing right now, it's that I can't use the DAQ Assistant to use the analog voltage to a channel and the digital channel counter at the same time. Once I put the DAQ Assistant to read the input from analogue voltage, I won't be able to add analog inputs. And as I put the DAQ Assistant to use the PFIO as a counter, I can add more entries to read analog voltage is.

  I wonder if it is possible to solve this problem using the lower level data blocks? Another solution would be to read two channels in analog input voltage and that the use of Matlab to process data resulting from it, since I was not able to do the counting to work simultaneously with the acquisition in Labview to impulses.

  Hope you guys can help out me.

  Thanks in advance.

  Using a simple wizard of DAQ is incorrect. You need one to acquire analog inputs and one for the meter.

• Configuration of 1120D SCXI using the DAQ assistant

  Hello

  I tried to set up a channel on a module SCXI in 1120 D, as well as the rest of the SCXI system, using the DAQ assistant, but ran into a problem related to the range of the signal.

  According to this, http://sine.ni.com/nips/cds/view/p/lang/en/nid/1658, the maximum voltage is located between 10v - 10v, but when I tried to configure a channel with a range of 0v - 10v, it displays an error indicating that the range of the signal was invalid and that the available range is - 0.005v - 0.005v, could someone suggest what I'm missing or what I need to do to set up?

  Thank you

  Chris

  Hi Chris,

  Thank you for your message.

  Can I ask that you have the software gain set on the device? The table on page A-5 manual found here your device that the gain settings must be for some input range.

  I imagine you have the gain set to 100 while the available range is ±50 mV. For - 10V - 10V, please adjust the gain to 0.5.

  Thank you very much

• VMware 6.5.5 cannot import the virtual machine that uses 2GB "disks of split.

  Hello

  I'm using VMware Workstation 6.5.5 under Win XP. I tried to import a virtual machine that was created by using the option 'Split' virtual disks into files of 2 GB. The import fails and presents a pop-up: ' Conversion Assistant/cannot determine the guest operating system. The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, there are more files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  Thank you.

  -Phil Anzel

  FYI... VMware Workstation peut import a Virtual Machine that uses twoGbMaxExtentSparse discs.

  The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, rather there are files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  The problem is that you're missing the "disk DescriptorFile", "cofortcol3v01 - cl1.vmdk" and which is why it's a failure and not a limitation of the Conversion utility.

  Also if you actually had a Virtual Machine created in VMware Workstation 5.1 you can simply run directly under VMware Workstation 6.5.5 without having to run the import command.

  Anyway, if you have a backup that you can recover the file "cofortcol3v01 - cl1.vmdk" then you should be fine and if you have not then a new can be created.  If you can archive (compress) files vmware*.log (usually 4 of them) in a single zip file archive and tied him to a post in response, then one of us will create a new file "cofortcol3v01 - cl1.vmdk", based on the information contained in files vmware.log for you, if you don't know how to do it yourself.

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

• I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

  I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

  I think they mean JavaScript.

  In your Safari menu bar, click Safari > Preferences and then select the Security tab, and then select: Enable JavaScript

• I have a Proxy Server that uses a self-signed certificate, and I can't accept this certificate from Firefox

  I have Firefox installed 37.0.1 on OpenSuse 13.2. I have a proxy server that uses a self-signed certificate, and I tried to add my certificate to the list of authorities and to check all the option displayed to be wz trust no chance.

  I tried to restart firefox, but it did not help.

  I did the same steps in chrome and it works fine.

  appreciate any help.

  After removing my .mozilla in my home directory. Add the certificate to the list of authorities in fact work.

• I do not understand this statement "It is a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument."

  It's a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument.

  Which no longer applies in Logic Pro X 10.2.3. In old versions of logic, selecting a range with a software instrument automatically would make this instrument in "Live" mode, which means that the instrument has begun to transform any MIDI in sound with a minimum of delay. This direct mode becomes an instrument need CPU power (on a single processor) and peut overload the audio engine. It is a waste of CPU if there is no direct game. Then select an audio track would ensure that No instrument is in direct mode. Now (LPX 10.2.2 or more) in direct mode can be turned on or off on a track, chosen or not - it is the R button on the track header.

• Flash videos and things that use flash freeze firefox completely.

  Well, whenever I open a drive flash or something like that, most of the things that use flash player as a plugin, it freezes my firefox, and then, after a while it may or may not say that a script is causing problems blah blah.

  In fact, it is safer (in the perspective of a security vulnerability) to use 11.3 with protected mode off, assuming that it works for you. 11.2 is not getting all the patches.

• Google site search keeps all loading on all sites that use it. However, the same sites load with IE.

  Google site search just keep loading forever on all sites that use it. But IE works fine on the same sites.

  I'm using FF 11, but it has also been a problem in previous versions. Win7/64 with the latest updates on a computer laptop xps Dell 15z. CORE I5

  Hello

  Please check if this happens in a new profile. If it's good, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings to another separate location of the files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

• HP workspace: is it possible to try HP work space with applications that uses my business?

  Hey everybody,

  Is there a way to try HP work space with applications that uses my business?

  Thank you

  Bill

  Yes, buyers of all bundle HP Elite x 3 on or before January 31, 2017 can enjoy a free 60 days HP Workspace Premium service launch promotion offer.5 which is more a $150 value per user! 6. contact your partner HP or HP account representative to activate the free promotional offer for 60 days.

• Disable applications that use wifi?

  Y at - it app, or a quick way to break/disable applications that use the wifi on my MacBook Air OS10.11.4 running?
  In other words, is there something that I can use to Dropbox and Google Drive interrupt synchronization, the break of Carbonite and switch Outlook in offline mode? Note that I'm not talking about simply turn off the wifi. These applications continue to check for a wireless connection, even after the wifi is off, using energy unnecessarily.

  So I was wondering if there is some kind of a gadget that knows what applications are based on wifi and can put all pause or reactivate them all, instead of me having to remember and do each manually.

  Any ideas anyone?

  To be effective you must really be looking for anything that uses the network. The things you mention (Dropbox, Google Drive, Carbonite and Outlook) have no idea if you are on WiFi or not. They are simply looking for a network connection.

• I lost this Firefox orange rectangular button that used to be in the upper left corner of my screen? How can I get that back?)

  I lost this Firefox orange rectangular button that used to be in the upper left corner of my screen? How can I get that back?)

  Most likely, you are showing the menu bar. Right-click on the toolbar area and uncheck the Menu bar - the Firefox button should appear. You can switch from one to the other.

• Where can I find the "recent pages" selection that used to be next door buttons 'Back-Forward "?

  Where can I find the "recent pages" selection that used to be next door buttons 'Back-Forward "?

  Make a right click the back / front button.