Satellite Pro 6100: screen stays completely white or completely white

Similar Questions

• Satellite Pro 6100 screen compatibility

  Hello!
  Is there a place I can check the compatibility of the screen for my Toshiba SP 6100?
  I have damaged a screen on one of my laptop and I would like to replace it.
  Thank you

  Hello

  The problem is that the Satellite Pro 6100 was delivered with four different views.
  14.1 ' (1024 x 768) color TFT display.
  15.1 ' (1024 x 768) color TFT display.
  15.1 ' (1400 x 1050) TFT color display.
  15.1 ' (1600 x 1200) TFT color display

  I found information that a P000334230 (LTN150X4-L01) screen is compatible with your device.
  http://www.getpartsonline.com/p000334230.html

  But I recommend to ask Toshiba service partner in your country for compatible screens.

• Satellite Pro 6100 screen size

  Hi, I have the same problem after upgrade from W2K to XP-Pro-SP2. The maximum pixel solution 969 x 768.
  Only when I uninstall the driver and make a start the pilot offer me a solution of 1024 x 768, but when I choose that it changes resolution 969 x 768 instead of the physical solution. The result is 55 columns of black screen on the right side. I tried different drivers of toshiba, nvidia, and microsoft, but it semms to depend on the operating system.

  Hello

  In my view, this problem occurs because Microsoft SP2.
  I read a topic on this similar problem, and as you say, this problem occurs after installation of SP2.
  Unfortunately, I n t have no solution for this problem :(
  Maybe update the BIOS can solve this problem, but I m not 100% sure.

  Good bye

• Satellite Pro 6100: cursor moves out of control on the screen

  Hey guys,.

  I'm seriously going crazy right about now... my problem is the following:

  I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

  About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

  The thing I've tried:
  Ran Spybot: Search and Destroy
  Ran Adaware
  Xoftspy RAN
  A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
  New keyboard
  New motherboard

  Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

  Thanks in advance!

  Hello

  I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
  The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

  Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

  If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• Why the Satellite L300 laptop screen stays white?

  Why the Satellite L300 laptop screen stays white?

  Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.

  What is your recommendation?

  Thank you for your response.

  Post edited by: Sams

  Hello

  Why?
  Who knows what have you that your screen is white?
  My screen is not white it shows everything correctly.

  The same white screen will appear on the external monitor?
  If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective

• Satellite Pro 6100 - code beep at startup

  Hi all

  Just picked up a 6100 Pro of the Satellite with a few problems.

  It lights up, he pointed out the HARD drive and I can hear the disk activity. However, the screen remains blank and a single beep can be learned after 20 sec. White screen, as I understand it, is probably the issue of Council power raging in the SP6xxx series. However, the beep I do not understand.

  I know that 2 beeps or 3 beeps is incompatibility of memory but no one knows which denotes the beep?

  Ta

  Hey Buddy,

  To be honest it's not easy to say what the cause of the problem because it could be everything and Satellite Pro 6100 is old enough for laptop.

  You have two memory modules RAM? If so remove a module. Always try a module only at the same time and test it in the slot of RAM A and B. A module is may be defective or a slot.

  If this is not the case, there seems to be a problem with the motherboard or the CPU itself. If you can exchange these things, try it yourself as a repair would be too expensive for this good old classic I think.
  Second hand spare parts you can get it on eBay s worth a try! ;)

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Satellite Pro 6100 - no idea on I need drivers

  Hello
  Well, I brought a Satallite Pro off ebay a few days back but I can't find what I need.
  I don't have any idea what the laptop except a Satallite Pro 6100 1.7 ghz, 512 MB ram mobile P4 CPU graphics card nividia.

  It would be great if I could know what laptop that I use to download the drivers, or at least be done in which I need only one I'd love to be able to change the brightness of the display by using the fn + F5 key and have the screen filling the LCD.

  Thank you.
  Mike.

  Hello

  I put t really understand your problem

  The European driver from Toshiba site provides all the important and necessary drivers for the Satellite Pro 6100.

  I assume you mean on the XP drivers
  Install all.

  In a first step, I recommend the installation of the common Module Chip Set Utility, display driver and then continue with the rest

  If you have installed SP2 please check the "Microsoft Windows XP SP2 update information" because some tools need to be updated.

  concerning

• [u] [b] Satellite pro 6100 + external projector problems [/ b] [/ u]

  Dear friends,

  I am trying to solve this problem:

  When I connect to the satellite Pro 6100 a 3rd party bCool XG1 DLP projector (a very good) I can see everything fine except DVD.

  I better explain: I can see the movies on the screen of the laptop, but nothing on the wall...

  Notice that I can look at these files directly on the screen, but on the wall...:
  MPEG files (Quick time Yes, but not WinmediaPlayer);
  AVI files (Quick time Yes, but not WinmediaPlayer);
  MOV files (Quick time Yes, but not WinmediaPlayer);

  DVD: (With Intervideo Windvd) Ok on the screen, but no output from the projector.

  Note that if I use the small window mode, the projector output image is correct except inside the window that is displayed in black (but is OK on the screen of the laptop).

  Who can help me?

  Thanks in advance.

  Stefano

  Hi Stefanohf,

  When you pass the output mode you have with keys FN and F5?

  also what settigs are set in the display driver? Right click on desktop, properties and parameters.

  go to advanced and nView. There should be active clone!

  Try this!

  Goodbye, Sam

• A Satellite Pro 6100 graphics card does not work correctly

  Hello!

  I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
  I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

  Now my questions:
  1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
  2. How can I do this, is there some tutorials, especially for my laptop?
  3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

  I thank very you much in advance!
  Lukas

  Hi Lukas

  The led flashes as it provides a microcode error!
  This is especially if the malfunction of hardware has been detected.
  I presume that the replacement of the graphics card is the reason!

  As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
  Looks like that the BIOS cannot handle this new graphics chip.

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• How to remove the bios password on Satellite Pro 6100

  Hello
  I got this Satellite Pro 6100, I would like to install windows xp on it, somehow once I opened it, it's just a black screen with the password.
  I removed the hard drive and I was able to access it with my computer, means that the password is not for the hard drive, but rather the bios.
  What is the password of the bios? How can I reset it? I removed the Green battery which I think it is the RTC battery, it would make? How long should I wait for the settings to be reset to zero?
  Y at - it no jumpers to reset the bios... ?
  I don't know what my son used a password, so I need help with this...

  Is it possible to kill the bios settings... ?

  Thank you

  Hello

  It seems that the machine has a BIOS password. And it seems that there are only 3 options:

  1 Google for the procedure how to remove a BIOS password
  2. ask your son for the password
  3. send your machine to an authorized servicepartner and allow them to remove the password, which means that you pay money for it.

  Welcome them

• Satellite Pro 6100 BIOS upgrade question

  Hello

  I have a toshiba satellite pro 6100 and currently it has 1.60 bios version and saw that the last update of the bios is the 1.90. My question is: is it question where I get the update of the bios of wheather it is from the site of toshiba UK or the United States, is the same bios update, or are they different? The other question is what I have to do the previous bios updates first 1.60 1.70 1.80 and finally to 1.90, or can I just do the 1.90 and who will have the previous updates in that one later?

  Hi Christian,

  I normally prefer to get the update of the BIOS in the same country as I bought the laptop. However, given that the laptop was probably manufactured around the world, I don't think it bothers us really until the update is marked as compatible with your model of laptop. In principle, the update of the BIOS for the components of the laptop and is therefore more linked to the actual model in his country of origin.

  It is not normally necessary load the intermediate versions of BIOS as BIOS is usually not cumulative but is provided as a complete package and includes all the code required.

  Kind regards

• Satellite Pro 6100 - is to "restore" a re - recovery CD install?

  Hello

  My Satellite pro 6100 won't start. "Starting process crashes and a message appears saying that the \windows\system32\config\system file:-«' is missing or damaged.
  When I ran the product recovery DVD, he asked me to confirm what operating system, I want to "Reinstall". At this point I turned it off because I don't want to do something that I can mean loose valuable data (photos) from my hard drive. The user manual is ambiguous, he speaks of restoring damaged files and restore the software preinstalled in the same section. Can someone tell me if I continue I will get the option just the file restore/repair damaged in question or he comes to wipe my hard drive (including my data) and completely re - install windows XP?
  Thank you

  Hello

  If you are using the recovery CD it erases everything on your computer! So if you have something that is important then it first save!

  BR

  Tom