Satellite Pro 6100 very slow during the installation of Windows XP Home edition

Similar Questions

• Just upgraded PC parts and windows XP home or pro install peripheral not during the installation of windows

  Yesterday, I got a new gigabyte motherboard, ripjaws ddr3 memory and a processor AMD phenom II 1090 t edition.  During the installation of windows, it copies the files and reformat my old hard drive.  35 minutes from devices of the installation each time the blue screen appears and says that windows has been shut down.   I also had another hard disk installed my cousin gave me and I tried formatting and installing windows on that one too and did not work. Tried to install PRO then Home edition and none worked.  I tried out the video card and ram for 1 and 3 of the Bank and all switching leaving Bank 1 and nothing. Only I have the keyboard / mouse USB and video card/RAM/hard disks installed. In total, we have tried to install windows for about 2 hours and a half. .  All I have to b compatible with my motherboard and I have no idea why.  Someone please help!

  A vista 64-bit with sp1 would be ok?

  In fact I just bought windows 7 from newegg so I hope this will work lol. I saw the way to the blue screen a lot and I newegg feedback seen many people having crashes then install with new material that came out, and my computer is a 5 days old now.

• Headset connected during the installation of windows 10 home

  What will happed if I accidentally plugged my headphones during the installation of windows?

  You won't hear anything. It shouldn't be a problem.

• Satellite Pro 6100: very slow recharge battery

  I bought a new battery pack for my Satellite Pro 6100 because my old Battery Pack loaded very slowly, about 5 per cent in 12 hours. But it turns out that my other one has the same problem.
  The problem may be the charger or the laptop.
  I already tried to unload the batteries fully.
  Can someone help me.

  Hello

  It is not easy to tell what can be the problem, but if you use the new battery pack and the problem is there, it is possible that electronic power on your laptop is not working properly.

• BSOD appears during the installation of Windows XP Home on Vista Equium A100-027

  Hello

  Like many users, I need to install Windows XP Home edition on my new satellite. It comes with Vista pre-installed. I inserted the Windows XP Home edition installation CD, but it stops with 'Blue Screen' after about 5 minutes of loading the drivers.

  Can someone give me a step by step guide on installing XP on Vista on the computer satellite phone? For example, what drivers should I? What (URL)? Should I format the hard drive? How to do this, i.e. restart vista what mode?

  Any other useful information in this sense will be useful?
  Thank you
  Riou

  Hello

  You want to replace the Vista operating system or do you want to use the two BONES?

  If you want to use both I would recommend installation of XP on the second partition NTFS.
  I m not 100% sure why the blue screen appears during installation of XP, but sometimes the installation of XP operating system was not possible because the XP OS CD did not contain the SP2.

  Therefore, it would be desirable to create CD of XP installation that includes SP2.
  This can be done using the software called nLite. Maybe it helps

• Satellite L300-190, (PSLB8E) and the installation of Windows XP Home edition

  Can I Satellite PSLB8E use this BIOS and configure XP Pro without doing anything else?

  Set controller SATA compatibility mode, and then use Setup / Cd XP Pro?

  It should work. Put in compatibility mode and try to install Windows XP Home edition, but use the Windows XP CD edition SP2 family facilities.
  It is very important.

• Satellite U300 - peripheral unknown after the installation of Windows XP Home edition

  Hello

  I have a Toshiba Satellite U300 - 14Q (model PSU30E). I installed XP, but there are 2 unknown devices:

  -Memoria Controladora PCI - in English: PCI memory controller (I guess...)
  -Device present-day - English: unknown device.

  I installed all the drivers of Toshiba and Microsoft. What are the missing driver?

  Greetings from the Spain.

  Hello

  -Module PCI Memory Controller Missing Robson, that it is not available for Windows XP Home edition and it will always appear in the Device Manager. It should not bother you at all.
  -Unknown device, I'm afraid that you forgot something. I don't know what, but it can be map or maybe utility password drive controller.

  Please make sure that you have installed stuff all listed according to document Instructions of facilities. The order of the facilities is also very important.

• 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

  I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

  Here's the driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229456&swLangOid=8&swEnvOid=4057

  There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

  The Base system is the JMicron card reader.

  Ethernet is Realtek gigabit

  USB is Intel USB 3.0

  1 unknown is 3D Driveguard

  2 stranger's validity

• Satellite A300-1QD - two questions during the installation of windows XP or Vista

  Nice day
  Here's my problem:

  1. I just bought the Toshiba Satellite A300-1QD and since there is Vista based on it and I have Vista ultimate, I decided to install on the laptop.
  After I formatted deleated everything and I have the partition that I created a new.
  After that I installed Vista, now I'm at the point where it says complete installation and the blow bar is at about 2/3.
  My problem now is that it's now been 3 hours and nothing happens the dots next to the 'installation complete' is still occurring and disappearing.

  2 as the number one lasted so long I decided to install windows XP Professional, but when it loads after that I put the cd one has bluscreen place called chkdsk.

  What should I do now to get something on what works?

  Hello. I think that the partition table and boot loader are messed up and it's your problem. You can try to chek to find errors and format your HARD disk with a third parity tool and try to install windows again.

• Question about the installation of Windows XP Home edition on two laptops Satellite A200

  Hello everyone,

  I have 2 laptops (Toshiba Satellite A200) but in different model
  A200-1z3 and A200-1ub
  I need to install XP on them and they have VISTA OS

  I have the drivers but I've heard that I need to install the driver SATA HD

  I heard about a program called [NLITE]
  I'm not sure what to do.

  Could you help me please!

  Note:
  Windows XP Home for A200-1ub so I can I use it for other phones
  Please accurately.

  Thank you

  Hello

  You should search here in the forum for similar topics and you will find the answer soon ;)

  Just for the note;
  Toshiba has published several documents that might help you to install the SATA drivers and to include it in the XP CD:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Driver SATA can be found on the Intel page too. An Intel Matrix Storage Manger contains these files needed to SATA.
  Please look for the IMSM package that contains the folder 'F6flpy '!

  Big names

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Preparation of an installation of Windows XP Home edition CD with a MINIMUM required drivers for A200-1AX

  Greetings,

  I am trying to install Windows XP Home edition on my old days by Satellite A200-1AX. Today, I tried to boot from the CD of Windows XP Home edition or after the copy of the system files, the laptop produces the error that Setup did not find any hard disk during the Installation of Windows XP. I looked on the internet and found the following page:

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  Explains how to resolve this problem. So I try to make my own installation CD of Windows XP Home edition with the necessary drivers. My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running? It is not necessary to install the drivers for all the A200-1AX since the first installation of XP, I can always go back and install those remaining of the XP; but I don't want the installation process interrupted due to a missing driver where I have to repeat the process of manufacturing more install of WXP CD custom. The list of drivers and devices provided by Toshiba is too long to write on a single installation with XP CD.

  My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?

  Thanks in advance for your answer.

  Best regards, Ashraf.

  > My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running

  You will need to include only the Intel Matrix Storage Manger for the XP CD again. Without this iMSM XP will not see the HARD drive
  This driver is important. Other drivers can be installed after the installation of XP!

  > My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  There are 2 versions of BIOS; One for Vista and one for XP. Generally, the update of the BIOS must be made before the instillation of OS but you can also try to do after installing XP. In both cases, the update of the BIOS would be possible.

  > If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
  Generally, Yes! Without the good BIOS features like the FN buttons could not work properly!

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  See the link below:

  https://forums.Adobe.com/thread/1836232

  The folder Lightroom 6.

  Right-click on Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.