Satellite Pro A100: Error PXE - E61 starting at startup

Similar Questions

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite Pro A100 - PXE message appears at startup

  I have a problem and I really really really could use some help, its been listen to me for the last two days ive trawled through countless amounts of forums and web pages without success then for a last ditch attempt until I throw it out the window (figuratively) I thought I'd come here for help!

  It's a Toshiba Satellite Pro A100 model No. ' PSAAPE-00Q00KEN

  initially when I started the computer this error message came

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Operating system not found

  now, I managed to stop the PXE errors by disabling the Lan built into the BIOS option

  I have check and made sure it is not a disk in the DVD player to the left it doesn't have a floppy drive so it isn't that

  BIOS for some reason usually see the hard drive is a seagate 80 GB HDD Sata, but I know that its fine because it works but in my Dell laptop.
  and my Dell laptop hard drive is not seen in the Toshiba.

  Now that I read all about flashing the BIOS, but I can't because the only download I get Toshiba is one that runs when windows is running (if I can't get it to boot, how do I Flash the bios)?

  I also tried thing BIOS resseting to short-circuit the c88 under the wireless network card, but that didn't work or the other!

  Now is there anything else I can try or do give up and throw it out the window?

  Thanks in advance

  Terrakan

  Hello!

  It's really strange, but it looks like your HARD drive to the motherboard controller is the reason for this because you said that the HARD drive works in another phone.

  Can you please try another HARD drive in this notebook? If another HARD drive works the old HDD is definitely faulty and if not, I think that the motherboard must be replaced.
  So, you can determine what is exactly the problem.
  In addition, I think that there is nothing more you can do at the moment.

  Good bye

• Satellite Pro A100 - flashing light battery and no start

  Hello

  I was sitting watching a video with my daughter yesterday when five minutes in my Satellite Pro A100 suddenly stopped working - cut out completely and not be reactivated. When I tried to restart the orange lit battery eleven short blinks blinked, and nothing else has happened. The battery has been low for some time, so we always run the AC adapter. The adapter is currently connected, but there is no blue light charge as I expect.

  With the battery removed do not get the flashes orange. With the battery and power adapter, I get the flashes orange.

  I was wondering if the AC adapter was missing, and we do not have a "low battery" warning because we were watching a video. That would explain the lack of charge indicator. When we get the flashes orange, we get this from the small amount of residual charge of the battery.

  Can anyone back this idea up - or anyone who can interpret the error code?

  Thank you

  Keith

  Hey Buddy,

  This means that you are able to start your computer or battery or AC/DC adapter only, good point?

  Well, theoretically it might be possible that AC/DC adapter is defective.
  When you try to start your laptop, nothing happens, right?

  In the best case, you know a friend who has the same AC/DC adapter, so you can test if the AC adapter is defective or not. Otherwise a professional diagnosis of an ASP would be necessary.

• Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

  Hello
  I have a toshiba satellite pro A100-psaase!
  I could not find this model on the toshiba site, so I chose the A100-psaas software.

  The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

  I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

  My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

  The funny thing is that I have internet and all.
  I can't find a solution to these two problems
  Thanks again

  Hello

  You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
  I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
  Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

  The LAN drivers are also published on the page! There are 2 different versions. Try them both!
  The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

  Good day

• Error in device IO on the Satellite Pro A100

  I need your help

  I do Win Xp update and PRECAUTIONS Paltalk after that my DVD/CD is broken

  Error message I get: "D:\ is not accessible. The request cannot be performed because of an i/o device error."

  For your information, I have the Toshiba Satellite Pro A100

  Try to remove the drive from Device Manager. After the withdrawal, please restart the laptop. The operating system should recognize the drive again and you could check the functionality.
  But to me it looks to your training goal is dirty and it is unable to read the disc.
  Try to clean it, use a lint cloth and as the part of the lens is delicate, being very soft when you rub.

  I found that also this two links provided a useful info:
  http://support.Microsoft.com/kb/321641/en-us
  http://support.Microsoft.com/kb/891894

  guys good luck

• Satellite Pro A100 will not start!

  Hello

  I am having trouble with a Tosh. Satellite Pro A100 (model: PSAACE).

  The laptop was acting kinda funny for the last week (turned off on its own, saying that it is running on battery when pluged) then today he has decided to power off on it's own and does not restart.

  Having checked it of get out the power supply, have tried with and without the etcetc... This battery with no luck...

  When I press the power button the only thing that happens is the symble of battery next to her light flashed orange 11 times (same lengtht flashed
  SS each time).

  Can anyone shed light on what is wrong with it? Or what this error on the battery light code is trying to say?

  See you soon

  Matt

  Hello

  > When I press the power button, the only thing that happens is light with the symbol of the pile beside it flashed orange 11 times (same length flashes each time).

  Hmm I think that it s a hardware problem. I would say that this s a motherboard problem.
  Is the motherboard provides and flashing, error code.
  This only happens if a serious hardware problem has been detected

  Unfortunately, only the ASP can read this code and may know what this code means but certainly must be a hardware problem.

  In this case an ASP is your last resort.

  Good luck

• Satellite Pro A100 very slow, especially at the start

  Hi, I just bought a laptop Satellite Pro A100. In general, I'm very happy with it, but I find it very slow especially at startup. It may take more than 5 minutes to be completely started.

  Are there settings or settings that I can do to fix this?

  Hello

  I agree with the previous user of the forum. I often heard that Norton slows down the system quickly. Try to remove it and test it again.

• Computer Dell laptop, OS preinstalled Windows 7 does not start. Error: PXE - E61

  Original title: Failure to Boot to

  Computer laptop Dell, OS of Windows 7 pre-installed. No disc restoration/reformat/install for 7. (This is bullcrap if you ask me). Does not start. Error: PXE - E61: Media test failure, check cable PXE - M0F: out Broadcom PXE - ROM

  What should I do here?

  See if there is a solution here: http://hubpages.com/hub/How-to-Solve-PXE-E61-Media-test-failure-Check-cable-Error

  J W Stuart: http://www.pagestart.com

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer

• Cannot boot from recovery CD - error: PXE - E61: Media test failure

  Recovery CD (Windows XP home Edition) cannot start the Toshiba satellite A40 Model # PSA40E-0EWDE-AR (SA40-261), whenever I try to Boot From recovery cd I get this error:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  but when I boot from any other cd (windows ME, WIN 2 K, WIN XP Pro...) everything is ok.
  Any clue? Help me please
  Thank you
  Mesha

  Hello

  It seems that the player is unable to boot from the recovery CD and the switch to boot from LAN.
  The error PXE - E61 message because the LAN cable was not connected and the laptop is not able to find a source of network boot

  I think you should check the recovery CD and perhaps you will need a new

• Satellite Pro A100 - has no Imaging

  Hi all

  I tried to picture 16 Satellite Pro A100 for several days now. I tried our usual deployment solution called altiris and cela images very well the machine (which means that all files are intact), but when starting says NTLDR error, after looking for awhile, I found that altiris was known to have some problems with SATA disks in function. At this point, I decided to re - build the main image and use Ghost, I tried their exchange of traffic on the network and they picture (the same as previously intact files) but always returned with the same error. Then I tried to drive my main image to another disk drive cloning, once again the same error appeared while my main drive worked fine. I tried all the fixes NTLDR, wrote new boots still with no luck. I don't see it was a hardware failure, because it would be very strange to happen in 15 laptops. What I'm looking for is a form manageable to the Image of these PCs, as they are used in a primary school and will need Imaging regularly.

  Any help or information would be greatly appreciated.

  Thank you

  Jason

  You get an error like this: an NTLDR or NTDETECT.COM not found

  If Yes, this problem may occur if your boot device (for example, a floppy drive, hard drive or CD-ROM drive) does not contain startup files.

  The resolution, you will get here on the Microsoft Web site:
  http://support.Microsoft.com/kb/555304/en-us

• Satellite Pro A100 (PSAACE) CD-ROM does not

  Computer: Toshiba Satellite Pro A100 (PSAACE)
  Age: 1 year
  Operating system: Microsoft Windows XP SP2
  CD-ROM: Pioneer DVD - RW DVR-K16A

  Whenever I put a cd in the rom it makes a series of strange noises, hard to explain, but this isn't really mather.

  At the end of the day, I take the cd see nothing hapends don't never no mather how long I wait.
  No error apears but it never had to read the cd.

  I tried a long list of solutions:
  Pilot Uppdate
  Reset dma tool
  Uninstall and reinstall

  Have you tried the method with the disassembly of the upper and lower of certain registry entries filters? If this is not the case, here's the quick tutorial:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Have you tried if you can boot from the CD?
  If you can, try to reinstall your Windows XP and see if problem persists.

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them

• The second monitor connected to the Satellite Pro A100 "disconnect" himself

  Hello

  I use my laptop - Satellite Pro A100 (PSAACE) - with a second monitor with no problems until I did an upgrade to Windows Vista. After installation, the second monitor starts to show problems, i.e. that works intermittedly. Every 5 seconds or so the monitor "unplug" itelf and caps again. I hear the (UN) plug sound when she did this and the two displays flickers during this period.

  Can someone suggest a solution to this problem?

  Concerning

  I put t know what can be the problem but it sounds like the connection problem. Make sure that the monitor is connected correctly. Also try to test it with another external monitor. Is perhaps the cable or connector defective.