Satellite Pro A100 - PXE message appears at startup

Similar Questions

• Satellite Pro A100: Trojan warning message during the windows BIOS update

  Trying to update my Bios through windows, my anti virus (f-secure) has a crush on decompressing the zip file a warning.

  The warning pointed out that the folder contained a Trojan horse and that he had been cleared to protect my computer.
  A warning from microsoft also said that access to these files had been blocked to protect your system.

  Is it possible that this update, downloaded from Toshiba really contain malware or could there be another reason for this event?

  Advice for help would be appreciated

  Post edited by: james7dean I have a satellite pro a100 o/s windows xp pro

  Hi james

  Don't you panic! You BIOS are not affected by Trojans, Malware or viruses.
  For the most part these BIOS files are not known for anti-virus applications and, consequently, anti virus software reports and notifies a virus.

  Before you start the update of the BIOS, you must disable automatic virus protection!

• Problems of browser on Satellite Pro A100

  I updated the BIOS on my Satellite Pro A100 and since I get the following message after about 30-40 minutes of navigation:

  "The connection was reset".

  The connection to the server was reset while the page is loading.

  * The site may be temporarily unavailable or too busy. Try again in a few
  moments.

  * If you are unable to load any pages, check your computer's network
  connection.

  * If your computer or network is protected by a firewall or proxy, make sure that
  that Firefox is permitted to access the Web. »

  I get a similar message using other browsers. Still, the only way I can get online is to restart my computer. Other computers in the House work perfectly at the same time, this message appears.

  Any suggestins/help will be greatly appreciated.

  Hello

  Who knows what happened to your computer? Have you tried to restore the firewall settings or factory settings? Otherwise, there can be question of updating the Bios, if you downgrade BIOS, it can bring the system with white screen crash.

• Virtual sound on Satellite Pro A100 problem

  Hello.

  I have the Satellite Pro A100 (PSAAC) "PSAACE - 00200DG 3"with Windows XP."
  I recently formatted my hard drive and run my Toshiba Recovery CD. Everything worked very well. As I downloaded the latest drivers for my computer including the Toshiba Virtual Sound drivers. After I deleted the old Virtual Sound driver and started installing new version of same message appears "Toshiba Virtual Sound can't stand your computer."
  Then I tried to install a later version of the same thing that was on the recovery CD and I would get the same message again. Moreover, after any new installation of Windows XP, Virtual Sound works OK. Please someone had the same problem and could you give me a solution.

  Thank you!!!

  Have you downloaded the right version? I mean the version for your model of laptop (PSAAC)?

• Satellite Pro A100 - has no Imaging

  Hi all

  I tried to picture 16 Satellite Pro A100 for several days now. I tried our usual deployment solution called altiris and cela images very well the machine (which means that all files are intact), but when starting says NTLDR error, after looking for awhile, I found that altiris was known to have some problems with SATA disks in function. At this point, I decided to re - build the main image and use Ghost, I tried their exchange of traffic on the network and they picture (the same as previously intact files) but always returned with the same error. Then I tried to drive my main image to another disk drive cloning, once again the same error appeared while my main drive worked fine. I tried all the fixes NTLDR, wrote new boots still with no luck. I don't see it was a hardware failure, because it would be very strange to happen in 15 laptops. What I'm looking for is a form manageable to the Image of these PCs, as they are used in a primary school and will need Imaging regularly.

  Any help or information would be greatly appreciated.

  Thank you

  Jason

  You get an error like this: an NTLDR or NTDETECT.COM not found

  If Yes, this problem may occur if your boot device (for example, a floppy drive, hard drive or CD-ROM drive) does not contain startup files.

  The resolution, you will get here on the Microsoft Web site:
  http://support.Microsoft.com/kb/555304/en-us

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings

• Cannot use wireless LAN with my Satellite Pro A100

  Toshiba Satellite Pro A100-830
  NETGEAR DG834G

  Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

  I don't know much about the technical aspects and therefore ask for help so any reader can.
  Thank you
  Kris

  > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

  You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
  Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

  I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

• Satellite Pro A100-830 with 4 GB of memory but the BIOS tells me that I have only 3 GB

  I have a Satellite Pro A100-830 and I bought the maximum memory for what is 2x2gb, for a total of 4 GB in my world. When I put the DIMMs in themselves in a slot, the BIOS reports 2 GB. BIOS Bravo! When I put both together, I see only 3 GB in the bios!

  I found this link on the Crucial site. http://www.crucial.com/kb/answer.asp?QID=4251

  Suggest page files, peripherals etc. occupy memory on your system at startup, before the operating system is used I guess. If you do not have the maximum memory installed, you should see the total memory. If you got the maximum memory installed, you will not see the memory used by page etc. files. Why would it be? Why you would see 2 GB if you have only 2 GB but then see 3 GB if you have 4 GB due to the system!

  Anyone can shed some light on this subject and be eligible or reject the information in this link. I need to replace the memory and/or the pc?

  Thank you

  Mark

  This is not a BIOS problem but a Windows.
  I found this info:
  Windows XP Professional 32-bit is limited to 4 GB of address space. If you have 4 GB of RAM installed, it won't show 4 GB in Windows. You will probably get what the size of your pagefile subtracted the 4 GB.

  Some of this address space is reserved for the hardware and the operating system... so you will never have access to the 4 GB maximum in any case. If you want access to 4 GB of RAM +... your best solution is to pick up XP Pro 64 - bit... but this will only work if your CPU P4 has EMT64. (64-bit)
  You can also try to turn on DEP if it is not already enabled... This will also allow EAP that can give you access to all 4 GB

  So finally a response:
  > Do I need to replace the memory and/or the pc
  -> No, everything is ok... you need not to change the hardware

• Error in device IO on the Satellite Pro A100

  I need your help

  I do Win Xp update and PRECAUTIONS Paltalk after that my DVD/CD is broken

  Error message I get: "D:\ is not accessible. The request cannot be performed because of an i/o device error."

  For your information, I have the Toshiba Satellite Pro A100

  Try to remove the drive from Device Manager. After the withdrawal, please restart the laptop. The operating system should recognize the drive again and you could check the functionality.
  But to me it looks to your training goal is dirty and it is unable to read the disc.
  Try to clean it, use a lint cloth and as the part of the lens is delicate, being very soft when you rub.

  I found that also this two links provided a useful info:
  http://support.Microsoft.com/kb/321641/en-us
  http://support.Microsoft.com/kb/891894

  guys good luck

• Satellite Pro A100 - blue screen keeps coming back

  I have a Satellite Pro A100 (psaase) and a blue screen appears some time it says image kernel memory and the only way out is to restart the laptop.
  How can I fix? Can someone tell me what's wrong with it and how to fix it?

  Thank you

  There are hundreds of causes BSOD. What is the BSOD STOP code?

  0x000000?

• Maximum RAM and type for Satellite Pro A100

  Hello.

  I have already looked at my manual, but I can't get a definitive answer.

  I went to one of these computers, analysis of Web sites and it claims I have 2 SLOTS where I can put 1 GB DDR II PC2-4200 each (so 2048 MB of ram)
  (es http://www.crucial.com/store/listparts.aspx?model=Satellite%20Pro%20A100%20Seri) But according to CPU - Z, my laptop contains DDR II PC2-4300 512 MB

  But when I recorded from TOSHIBA Web site and entered the serial number of my cell phone, he told me that I had a Satellite Pro A100-196
  When I searched for Satellite Pro A100-196 on the internet, I came across a website (http://toshiba.icecat.biz/en/p/PSAACE-00E00DG3/Satellite%2520Pro%2520A100-196.htm) that says that 100-196 a module of DDR II (533 mhz) and that it can place additional modules up to 4096 MB (which means I can't that modules of RAM 2 GB each)

  So I would like to know if anyone knows the final RAM MAX (and type), I can place.

  Thank you.

  The Satellite Pro A100-196 appears to bear the 667 Mhz front bus!
  So, you can also use the modules of memory 667 Mhz (533 Mhz is also possible).

  I advise to use SODIMM 200 PIN DDR2 modules; 667 MHz (PC2-5300)

  You can upgrade the memory to 4 GB max. So it is certainly possible to use a 2 GB into a slot!

  Good bye

• Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

  Hello
  I have a toshiba satellite pro A100-psaase!
  I could not find this model on the toshiba site, so I chose the A100-psaas software.

  The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

  I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

  My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

  The funny thing is that I have internet and all.
  I can't find a solution to these two problems
  Thanks again

  Hello

  You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
  I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
  Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

  The LAN drivers are also published on the page! There are 2 different versions. Try them both!
  The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

  Good day

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro A100 - audio artifacts / Virtual Sound

  My Satellite Pro A100 (PSAA3E) has a boring character: audio (MP3, DVD, MPEG audio, etc.) reading is accompanied by a rumbling of objects of type "underwater." The same files (audio or video) or played on any other computer in the House of discs play perfectly well.

  Since the problem seems to be related to this laptop, I tried to watch the audio software updates.

  I noticed the Virtual Sound up-to-date. Downloaded, he ran. Installation upgrade needed to the previous version to remove, I did. Re-directed the program installation and received the message: "Effect Audio TOSHIBA does not support your computer."

  Now, I still have the annoying audio artifacts, but I do not have any version of the Virtual Sound utility!

  Someone at - it guidance to offer on this situation?

  Thank you very much...
  David.

  Hello

  I can t believe that it of not possible to install it too much if it has been downloaded driver Toshiba and the box on the right page.

  I found a statement of installation for this laptop. He was placed in the pilot area.
  I think you should follow this guide to install the software and drivers.

  Sorry, but I put t see any other possibility to install Toshiba stuff on your laptop.
  As far as I remember that some drivers and utilities need other applications. Therefore, the order is important.

• Satellite Pro A100 does not connect to the internet if the power adapter is plugged

  Hello
  I have a Satellite Pro A100
  The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
  See you soon
  Jim

  Hello

  How do you connect to the internet? With the WLan or cable LAN?
  It s very unusual as the intermits connection when the power adapter is connected.

  This question appears because you buy the laptop?