Satellite Pro A100 (PSAACE) - do not display

Similar Questions

• Satellite Pro A100 (PSAACE) CD-ROM does not

  Computer: Toshiba Satellite Pro A100 (PSAACE)
  Age: 1 year
  Operating system: Microsoft Windows XP SP2
  CD-ROM: Pioneer DVD - RW DVR-K16A

  Whenever I put a cd in the rom it makes a series of strange noises, hard to explain, but this isn't really mather.

  At the end of the day, I take the cd see nothing hapends don't never no mather how long I wait.
  No error apears but it never had to read the cd.

  I tried a long list of solutions:
  Pilot Uppdate
  Reset dma tool
  Uninstall and reinstall

  Have you tried the method with the disassembly of the upper and lower of certain registry entries filters? If this is not the case, here's the quick tutorial:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Have you tried if you can boot from the CD?
  If you can, try to reinstall your Windows XP and see if problem persists.

• Satellite Pro A100 PSAACE - no DVD drive detected

  I recently bought a Toshiba Satellite Pro A100 PSAACE a friend and make home and implement market realized that the dvd drive is not detected by the laptop at all.

  The drawer opens normally, and when I close it the light flashes orange little but no detection at all!

  Help, please! Gets very frustrated by that.

  Hello

  Optical drive not recognized for the BIOS is or is not listed in Windows Explorer? CEN you report State in Device Manager?

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro A100: Bluetooth does not work

  bought a toshiba Satellite Pro A100... came with a built in blue tooth... al worked well... until 4moths to fight back my computer had to be repair he was expelled to the toshiba returned however restarted by bluetooth/service application are not on the taskbar.

  I am looking for the computer n found in system folders aside my blue tooth stack but how to make the blue tooth to work.

  Make sure the WiFi switch is on.
  Press + and select the bluetooth antenna.

  Check if your Bluetooth module has been correctly detected:
  -Open the DeviceManager (start-> Run-> "devmgmt.msc").
  -Open the section "system devices".
  -A "Bluetooth ACPI" device should be available.
  (The system has detected the BT module if this is the case).

  Install the battery last Bluetooth (= drivers + Bluetooth management software) v5.10.12T.
  You can download it here:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php

• Upgrade of RAM in my Satellite Pro A100 (PSAA3E) was not recognized.

  I have a Pro A100 (PSAA3E) with only 512 MB of RAM.

  I added another identical stick but only 1 has been recognized.
  Each stick is recognised individually in each slot, but never as a 1 GB together. Thus, the two sticks are ok and two slots are okay!

  How can I remedy so that both are recognized?

  Did you use one that is recommended by Toshiba?
  Seems the two modules aren't compatible together hmmm seems very strange.

  How you did upgrade the memory?
  You must disconnect all cables and remove the battery. Then install the memory modules and enter the BIOS. There, you should check if the memory has been increased and set the default BIOS. Don t forget to safe settings!

  Good luck

• How to change the module RAM in Satellite Pro A100 (PSAACE)?

  Hey,.

  I just bought a RAM module to fit in my currently empty home of RAM, but I never installed any portable computer memort before that. I checked a few guides, but none seem to show the kind of clips that have the Pro A100.

  Could someone help me please by pointing me in the direction of a specific guide or taking their time to explain the process.

  Thank you in advance.
  Jason

  On the side at the bottom in the middle is placed the memory cover. Remove it and you'll see two memory slots there. I assume that your device comes with the memory module and new you must put in the empty socket and just press it. Two metal brackets will fix it in the right position.

  That's all you need to do. By the way: before you start doing anything, I recommend you disconnect AC power and also to remove battery.

• Satellite Pro A100 (PSAACE) - Display driver for Windows 7

  Hello

  My A100 works under Windows XP (video: ATI Mobility Radeon X 1600), but in Windows 7 video graphic standard is 4 MB? Does not have the required driver in Toshoba-downloads (95MB) - no hardware compatibility? Windows 7 is so virtual env. slooooowly...

  Can someone help me?
  Thanx.
  Minnikon

  Hi Minnikon,

  And why the page display driver Toshiba doesn't? You get an error message or something else? What happens exactly?

  In General, the chipset driver must be installed everything first. Then, you can install the Toshiba page display driver.

  Check this box!

• Drivers Ati Vista will not install on Satellite Pro A100 PSAACE

  I saw a number of other users in the forum with the same question. I looked a little further on my machine, and it seems the driver saves oneself is not worl or there is a hardware fault with the graphics card.

  Here, it's put him the catalyst installation error report...

  Catalyst® Install Manager
  Installation report
  Thu, July 12, 2007 13:28:08

  Hardware information
  Name of the ATI Mobility Radeon X 1400 graphics card
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 7145
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0xff10
  Subsystem vendor ID 0 x 1179
  Other materials

  Existing packagesATI Catalyst Install Manager
  Catalyst Control Center
  Microsoft Visual C++ 2005 Redistributable

  Packages for installation
  ATI Catalyst Install ManagerFinal status:
  Version of the article: 3.0.504.0
  Size: 20 MB
  DriverFinal ATI display status: failed
  Version of the article: 8.31.100.32
  Size: 90 MB
  Catalyst CenterFinal status:
  Version of the article: 2.0.2519.38216
  Size: 150 MB
  Microsoft Visual C++ 2005 RedistributableFinal status:
  Version of article: 7.3.0.0
  Size: 10 MB

  Other devices detected

  Error messages
  Driver installation: installation failed
  Installation of the application: failure

  After the execution of the executable, I tried to install the driver maually locate the files in the driver package, while windows recognizes the inf file, it gave an error saying that it could not read the device...

  Hello

  What graphics driver you used?
  One from the ATI Web site or the graphics driver for the Toshiba page?

  You must use the graphics driver on the page because Toshiba that these drivers are designed and specially modified for Toshiba laptops!

  I tried to use the graphics drivers for example, nVidia page, and I was not able to install it automatically.
  I find on this forum that the graphics drivers from Toshiba are slightly changed to prevent overheating of the graphics card.

  Due to a high performance graphic map of the temperature increases and can damage some parts inside the laptop.
  The graphics driver prevents the increase in temperature and slows down the performance of the graphics card. If temperature decreases the performance increases.

• Satellite Pro A100 PSAACE: cannot install the ATI display driver

  Hi all

  I experienced a series of problems with my card graph Mobility Radeon X 1400 that I'm sure that can be resolved by downloading the latest drivers. What I have to do on the Toshiba site like the ATI site offers no support for it. But I've known several problems to download the file archive.

  He always says that there is an error: 'error header... ". (missing or corrupted) "and he asks me to redownload the file, I did this three times now, with the same results, I'm starting to get a little frustrated - can someone + please help. I noticed that the file downloaded (and useless) is smaller (by more than 50%) than the expected size - I don't know if this helps all the...

  Preemptive thanks if you can help me with this problem.

  Hello

  What to say I noticed that drivers download server is very slow. Resembles overload eventually all packages have not passed correctly and so this error message is displayed.
  I know that this could be very frustrating and I really understand you because I tried to download the other driver and performance is really slow, but I put t see any other solution than to try to re-download the graphic driver package

  Good luck buddy

• Get Bluesceen on Satellite Pro A100 (PSAACE)

  Hi all

  I have big problems with my laptop. He started 2 months when I finally had free wireless internet. On using it, I kept getting the BSOD and thought it was a problem with my RAM. After some trial and error results achieved, it wasn't my ram still getting BSOD. I disabled wireless and used for some time, then again BSOD and startup problems. I thought that maybe a virus, so I ended up formatting my drive (as he needed anyway), but still get BSOD with error code:

  DRIVER IRQL NOT LESS OR EQUAL

  0x000000D1 (0x0000c79B, 0 x 0, 00000002 00000000, 0xF70CA16E)

  I checked on the net but no resolution. I'm about to re - install all drivers, but I think it is definitely a hardware problem because I noticed when I move around it fails always start the first time. I am running XP PRO and Bitdefender Total Security 2008. I have 2x512mb ram what do not the same but both the same specification. Any ideas anyone?

  Hi friend

  I agree, it is definitely a hardware problem. I had a Satellite A100 (PSAAE) and the BSOD appeared too. After sending the machine to a repair center and 1 week of waiting, the error never appeared again.

  Is the machine still in warranty? If so, then send it immediately to an ASP, otherwise, I'm selling the machine and buy a new one.

  Welcome them

• Satellite Pro A100 (PSAAC) DVD-RAM UJ - 841S cannot read audio CDs

  Sat Pro (psaac) DVD-RAM UJ - 841S will not read or play the audio CD
  Everything else works fine but put in any audio cd and nowt.
  Help?

  Hello

  As you know, each CD is compatible and supported by each optical drive.
  Can I ask you this and audio CD don t work? These are original audio CD or burn one?
  You should know that many new audio s CDs come with copy protections of different and sometimes it happens that these CD s are not readable.

  But we must first know if need all options are enable. To do this you must enter the properties of the drive and check if the option enable digital CD audio for this CD-ROM device has been activated successfully.

• Satellite Pro A100 (PSAAC) with WIN XP - shutdown problem

  I have problems with my laptop stops not when I ask to do. The message that TSrsTRAYWND isn't closing arrives and I'm invited to manual closing. Even if I do this, the machine "blockages" and does not shut down. I tried the boot without failure and closure then - it does correctly, but then when I start normally and try to stop, it is up to the "hanging" again. The operating system and other programs are fully up-to-date.

  Can anyone suggest one solution, from other online for one, I see that others have the same problem, without a solution yet.

  In anticipation of your help, thank you!

  PS - I can't find any reference to the TSrsTRAYWND anywhere.

  Hello

  I tried on my laptop for a TSrsTRAYWND.exe file but I could t find anything. If you search for this file on the HARD drive you get a result?

  I think it has something to with the drivers/software that will be loaded on Windows start. You should try to disable all programs in msconfig-start up that you don't need online. Then try again.

  Sorry, but everything that s what I can say at the moment.