Satellite Pro A100 (PSAAC) with WIN XP - shutdown problem

Similar Questions

• Satellite Pro A100 (PSAACE) CD-ROM does not

  Computer: Toshiba Satellite Pro A100 (PSAACE)
  Age: 1 year
  Operating system: Microsoft Windows XP SP2
  CD-ROM: Pioneer DVD - RW DVR-K16A

  Whenever I put a cd in the rom it makes a series of strange noises, hard to explain, but this isn't really mather.

  At the end of the day, I take the cd see nothing hapends don't never no mather how long I wait.
  No error apears but it never had to read the cd.

  I tried a long list of solutions:
  Pilot Uppdate
  Reset dma tool
  Uninstall and reinstall

  Have you tried the method with the disassembly of the upper and lower of certain registry entries filters? If this is not the case, here's the quick tutorial:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Have you tried if you can boot from the CD?
  If you can, try to reinstall your Windows XP and see if problem persists.

• Satellite Pro A100 PSAACE - no DVD drive detected

  I recently bought a Toshiba Satellite Pro A100 PSAACE a friend and make home and implement market realized that the dvd drive is not detected by the laptop at all.

  The drawer opens normally, and when I close it the light flashes orange little but no detection at all!

  Help, please! Gets very frustrated by that.

  Hello

  Optical drive not recognized for the BIOS is or is not listed in Windows Explorer? CEN you report State in Device Manager?

• Satellite Pro A100-830 with 4 GB of memory but the BIOS tells me that I have only 3 GB

  I have a Satellite Pro A100-830 and I bought the maximum memory for what is 2x2gb, for a total of 4 GB in my world. When I put the DIMMs in themselves in a slot, the BIOS reports 2 GB. BIOS Bravo! When I put both together, I see only 3 GB in the bios!

  I found this link on the Crucial site. http://www.crucial.com/kb/answer.asp?QID=4251

  Suggest page files, peripherals etc. occupy memory on your system at startup, before the operating system is used I guess. If you do not have the maximum memory installed, you should see the total memory. If you got the maximum memory installed, you will not see the memory used by page etc. files. Why would it be? Why you would see 2 GB if you have only 2 GB but then see 3 GB if you have 4 GB due to the system!

  Anyone can shed some light on this subject and be eligible or reject the information in this link. I need to replace the memory and/or the pc?

  Thank you

  Mark

  This is not a BIOS problem but a Windows.
  I found this info:
  Windows XP Professional 32-bit is limited to 4 GB of address space. If you have 4 GB of RAM installed, it won't show 4 GB in Windows. You will probably get what the size of your pagefile subtracted the 4 GB.

  Some of this address space is reserved for the hardware and the operating system... so you will never have access to the 4 GB maximum in any case. If you want access to 4 GB of RAM +... your best solution is to pick up XP Pro 64 - bit... but this will only work if your CPU P4 has EMT64. (64-bit)
  You can also try to turn on DEP if it is not already enabled... This will also allow EAP that can give you access to all 4 GB

  So finally a response:
  > Do I need to replace the memory and/or the pc
  -> No, everything is ok... you need not to change the hardware

• How to change the module RAM in Satellite Pro A100 (PSAACE)?

  Hey,.

  I just bought a RAM module to fit in my currently empty home of RAM, but I never installed any portable computer memort before that. I checked a few guides, but none seem to show the kind of clips that have the Pro A100.

  Could someone help me please by pointing me in the direction of a specific guide or taking their time to explain the process.

  Thank you in advance.
  Jason

  On the side at the bottom in the middle is placed the memory cover. Remove it and you'll see two memory slots there. I assume that your device comes with the memory module and new you must put in the empty socket and just press it. Two metal brackets will fix it in the right position.

  That's all you need to do. By the way: before you start doing anything, I recommend you disconnect AC power and also to remove battery.

• Satellite Pro R50 - B Series 10 Windows shutdown problems

  Hi out there!

  I wanted to just inform you on an enoying but reproducible BUG:

  Toshiba Satellite Pro R50 - B series:

  You must disable the Intel Management Interface in the Device Manager in the contrary case, the computer laptop didn't shutdown completely / Standbymode will not work.

  Question (Bios V1.4 - Intel ME 11.00.1166):

  Work more than 30 min. then try closing. Screen goes blank - but the LED on the stay before the fan stays on until the battery is completely discharged. Or try to go to sleep mode. Even the stop.

  Just disable Intel ME Manager of year Windows devices you fine.

  Waiting to hear from Toshiba - I m a reseller, so the same problem exists on > 10 notebooks here.

  Best regards, Bernhard

  Hi, I have exactly the same problem with my Satellite Pro R50 and Windows 10.
  Just installed the updated Toshiba Win10 drivers, but not a solution.
  Help, please!
  Best regards, Oliver

  EDIT: SOLUTION

  https://Forum.Toshiba.EU/showthread.php?81944

• Satellite Pro U200: BSOD error and sudden shutdown problem

  I have been using Satellite Pro U 200 since July this year.
  I had a strange problem. The problem began in mid-October where my laptop appears a blue windows error screen and restart. When the system will re-start the screen would flicker start and the operating system would not initialize correctly.

  It would give all sorts of error messages. Even if I tried to install a new operating system at this time where he would give error with the disc saying some file is corrupted. If you leave the phone turned off, it would again work normally.
  The disc would normally work on other portable computers desktop computers.

  I sent it for repair and they changed the hard drive. But the problem has returned to a degree less after a week.
  He sent again and this time they changed the motherboard.
  But the problem is now back with the blue screen stop.

  It's a Toshiba U 200 1.66 GHz memory gigabyte hard drive.
  I bought the Canada and use it in England, there is therefore a Canadian power cable.
  I am using Windows XP Pro with Service Pack 2

  Any help will be appreciated!

  Is it possible that some application you use is responsible for this? If there is an error on the corrupted file, I'm a bit skeptical about a malfunction of the equipment.

  You did some hardware upgrades?
  Check Please also this interesting article on the BSOD http://articles.techrepublic.com.com/5100-10877-6053684.html

• Satellite Pro A100 (PSAACE) - do not display

  Hi all

  You have a problem that has confused me.

  A few weeks ago my very old a100 Sat Pro (PSAACE) began to refuse to display anything on the screen.

  It comes to boot, that is, I press the power button on the cold, the system of vortices and fan will both nothing appears on the screen.

  I left the cell only and noticed she appeared on my network, so I have remote desktop connected to and everything worked, but still no display on the laptop actually.

  Thinking that perhaps it would be a weird configuration that I started by pressing Fn + F5 to switch between views, at this point, I managed to get a display on the laptop screen.

  But at the next startup, it does the same thing, that lasted a few days with me by pressing Fn + F5 to get a display.

  Then the Fn + F5 has stopped working, I was still able to remote desktop and use the laptop but I couldn't get anything to display.

  In windows, the ATI Mobility 1400 had disappeared from the Device Manager.

  I thought that the controller VGA card had blown to order it a new.

  I mounted this now, and it has not solved the problem. The Fn + F5, workaround works sometimes, but give a very weird-like display corrupt fonts etc.

  * However if I do a screenshot it and the screen on another PC and fonts appear normal. *

  The 1400 mobility is now recognized by Windows, but still nothing on the screen at during the POST, boot, or Windows.

  Fearing corruption BIOS I re flashed with the official BIOS 6.00.

  All in all the machine works fine, just no display or by pressing Fn + F5 I can sometimes get the corrupted + with screen.

  Finally, I hung on an external monitor, at no time do get any screen top regardless of the Fn + F5 or windows, POST etc...

  Any thoughts? A defective cable of LCD/FL would cause this type of problem? or even a faulty inverter Board? or because I don't have any external display I'm looking for a failure of the main card?

  Happy to make all new test someone can think...

  Thanks in advanced for the help

  Richard

  > Any ideas? A defective cable of LCD/FL would cause this type of problem? or even a faulty inverter Board? or since > I have no external display I am looking at a motherboard failure?

  I understand you; you don t get anything on an external monitor?
  Hmm, in my opinion it FL s inverter not given that the FL inverter controlled only a screen backlight
  So even if the FL inverter would be defective, you'd see something on the external monitor, but very weakly.

  Cable LCD/FL problem? Perhaps, but if the cable is defective you wouldn't see anything, even using Fn + F5 key combination.
  So finally, it could be a motherboard problem. But just a guess

• Get Bluesceen on Satellite Pro A100 (PSAACE)

  Hi all

  I have big problems with my laptop. He started 2 months when I finally had free wireless internet. On using it, I kept getting the BSOD and thought it was a problem with my RAM. After some trial and error results achieved, it wasn't my ram still getting BSOD. I disabled wireless and used for some time, then again BSOD and startup problems. I thought that maybe a virus, so I ended up formatting my drive (as he needed anyway), but still get BSOD with error code:

  DRIVER IRQL NOT LESS OR EQUAL

  0x000000D1 (0x0000c79B, 0 x 0, 00000002 00000000, 0xF70CA16E)

  I checked on the net but no resolution. I'm about to re - install all drivers, but I think it is definitely a hardware problem because I noticed when I move around it fails always start the first time. I am running XP PRO and Bitdefender Total Security 2008. I have 2x512mb ram what do not the same but both the same specification. Any ideas anyone?

  Hi friend

  I agree, it is definitely a hardware problem. I had a Satellite A100 (PSAAE) and the BSOD appeared too. After sending the machine to a repair center and 1 week of waiting, the error never appeared again.

  Is the machine still in warranty? If so, then send it immediately to an ASP, otherwise, I'm selling the machine and buy a new one.

  Welcome them

• Satellite Pro A100 (PSAAC) DVD-RAM UJ - 841S cannot read audio CDs

  Sat Pro (psaac) DVD-RAM UJ - 841S will not read or play the audio CD
  Everything else works fine but put in any audio cd and nowt.
  Help?

  Hello

  As you know, each CD is compatible and supported by each optical drive.
  Can I ask you this and audio CD don t work? These are original audio CD or burn one?
  You should know that many new audio s CDs come with copy protections of different and sometimes it happens that these CD s are not readable.

  But we must first know if need all options are enable. To do this you must enter the properties of the drive and check if the option enable digital CD audio for this CD-ROM device has been activated successfully.

• Satellite Pro A100 (PSAACE) - Display driver for Windows 7

  Hello

  My A100 works under Windows XP (video: ATI Mobility Radeon X 1600), but in Windows 7 video graphic standard is 4 MB? Does not have the required driver in Toshoba-downloads (95MB) - no hardware compatibility? Windows 7 is so virtual env. slooooowly...

  Can someone help me?
  Thanx.
  Minnikon

  Hi Minnikon,

  And why the page display driver Toshiba doesn't? You get an error message or something else? What happens exactly?

  In General, the chipset driver must be installed everything first. Then, you can install the Toshiba page display driver.

  Check this box!

• Satellite Pro A100 (PSAAC) - freezing for a second unknown device

  Hello

  I have recently reinstalled Windows on my computer, after installation, is a problem. With an interval of 10-15, my computer hangs at about a second - the computer reacts to the entry, and if a sound is played he repeats again and again.

  I don't know if it has something to do with it, but when I start the computer I get the error message "cannot read the Manager!" I noticed that I have a unknown device in my device manager, location: location 65535 (internal Bus High Definition Audio). I can't find the driver.

  I don't know if the problems are related, I just want the freezing part to fix.

  Best wishes
  Hans

  Hello

  you have installed a sound card driver? Anyway, how to identify the unknown device, read here:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• Satellite Pro A100 - PSAACE: Installation of BT is Frost

  PROBLEM WITH BLUETOOTH! When I had XP everything was OK, but one day, this icon on the system tray began to be red (disable Bluetooth) I tried to turn on using FN + F8 but it doesn't help.
  I tried to reinstall the application "Bluetooth Stack" but each time the application starts correctly then freezes after the first screen. I decided to change the system for Windows Vista Business, but when I try to install BT Stock on the sill fresh system freezes.
  I installed battery BT using the silent method (unzip the files when it performs file that can do this). But the Bluetooth is still don't DO NOT WORK! It shows Bluetooth when click FN + F8 but nothing happens.

  That is really important in what order I install the drivers? Where can I find order. I tried to find it-without results.

  Is a "Bluetooth ACPI" device in the Device Manager still available?
  Have you visited the following Web site? :
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

• Drivers Ati Vista will not install on Satellite Pro A100 PSAACE

  I saw a number of other users in the forum with the same question. I looked a little further on my machine, and it seems the driver saves oneself is not worl or there is a hardware fault with the graphics card.

  Here, it's put him the catalyst installation error report...

  Catalyst® Install Manager
  Installation report
  Thu, July 12, 2007 13:28:08

  Hardware information
  Name of the ATI Mobility Radeon X 1400 graphics card
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 7145
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0xff10
  Subsystem vendor ID 0 x 1179
  Other materials

  Existing packagesATI Catalyst Install Manager
  Catalyst Control Center
  Microsoft Visual C++ 2005 Redistributable

  Packages for installation
  ATI Catalyst Install ManagerFinal status:
  Version of the article: 3.0.504.0
  Size: 20 MB
  DriverFinal ATI display status: failed
  Version of the article: 8.31.100.32
  Size: 90 MB
  Catalyst CenterFinal status:
  Version of the article: 2.0.2519.38216
  Size: 150 MB
  Microsoft Visual C++ 2005 RedistributableFinal status:
  Version of article: 7.3.0.0
  Size: 10 MB

  Other devices detected

  Error messages
  Driver installation: installation failed
  Installation of the application: failure

  After the execution of the executable, I tried to install the driver maually locate the files in the driver package, while windows recognizes the inf file, it gave an error saying that it could not read the device...

  Hello

  What graphics driver you used?
  One from the ATI Web site or the graphics driver for the Toshiba page?

  You must use the graphics driver on the page because Toshiba that these drivers are designed and specially modified for Toshiba laptops!

  I tried to use the graphics drivers for example, nVidia page, and I was not able to install it automatically.
  I find on this forum that the graphics drivers from Toshiba are slightly changed to prevent overheating of the graphics card.

  Due to a high performance graphic map of the temperature increases and can damage some parts inside the laptop.
  The graphics driver prevents the increase in temperature and slows down the performance of the graphics card. If temperature decreases the performance increases.

• Satellite Pro A100 PSAACE: cannot install the ATI display driver

  Hi all

  I experienced a series of problems with my card graph Mobility Radeon X 1400 that I'm sure that can be resolved by downloading the latest drivers. What I have to do on the Toshiba site like the ATI site offers no support for it. But I've known several problems to download the file archive.

  He always says that there is an error: 'error header... ". (missing or corrupted) "and he asks me to redownload the file, I did this three times now, with the same results, I'm starting to get a little frustrated - can someone + please help. I noticed that the file downloaded (and useless) is smaller (by more than 50%) than the expected size - I don't know if this helps all the...

  Preemptive thanks if you can help me with this problem.

  Hello

  What to say I noticed that drivers download server is very slow. Resembles overload eventually all packages have not passed correctly and so this error message is displayed.
  I know that this could be very frustrating and I really understand you because I tried to download the other driver and performance is really slow, but I put t see any other solution than to try to re-download the graphic driver package

  Good luck buddy