Satellite Pro A120 has network problems

Mr President.

I, Jayarajan.C.N, working as an Assistant Executive Engineer in the Kerala State Electricity Board, Kerala, India.
We had a laptop brand Thoshiba (Satellite Pro A120 type; PTA83L-08L02N model number; SL.no. Y6131B1488H) as part of a package of type brand MD - 2000 Tesient relay.

We use this laptop for other official purposes also. It works smoothly.

But we were faced with the following problems:
1. we could connect the computer laptop in Local Area Networking with other desktop computers and laptop. But we could not transmit or receive data from the other computer.

2. we could connect us the laptop to the network in ad-hoc mode wireless and the laptop showed the link as 'excellent '. But as in the case of LAN, data may not be transferred or received.

3. we tried to use dial-up modem to the laptop. But we do not have internet access. The error showed was 'busy line (error 676) '. In fact, the line was not busy.

4. we checked to access internet using Reliance Netconnect USB modem after installing its software. He also failed in showing the "username & passwords are wrong in this area.

5. I added an init string in the Toshiba modem commands: AT & FX1. But before that, I made a mistake. I installed the Client Services for Netware. After that, the connection mode was changed. But I don't know how to uninstall "client services for Netware". I selected the account control user - change the way users log on or off, I received the following message: "client for Netware has disabled the display of welcome and quick user agrees." To restore these features, you must uninstall client services for Netware. As I said before, I don't know how to uninstall the same. Now during log on, I have to use ctrl + alt + delete to log on.

After you have added the string init AT & FX1, I have only seen the modem trying to catch the net until the "veryfying username and password. But he could not catch the net. Please note that I had installed the client services for Netware. I saw that the modem has been "connecting" even after a few minutes and I noticed the system reacted very slowly.

In short, we cannot achieve any type of networking and by error logging has been changed...
We ask your advice detailed without delay.
Thanks in advance.

Regarding
DANIELA. C.N,
Assistant Executive Engineer,
[email protected]

Hello

Please don t be angry with me, but this is a user-forum user and please don t expect magical solutions or answers.
However, I will try to give some suggestions.

1.) Please check if you are in the same workgroup or domain and check if you have set the right rights to folders. In addition to check all the parameters of the firewall and possibly disable it please!
(2) see point 1)
3.) found a Microsoft document describes this error message:
http://support.Microsoft.com/kb/187215
or
http://Xtra.co.nz/help/0, 5721-2513242, 00.html

(4) Please check the user name and password. Please note; It case sensitive s

(5) If you want to remove the Client Service for Netware, click on START/SETTINGS/CONTROL PANEL/CONNECTIONS NETWORK. On your CONNECTION to the local AREA NETWORK right click, select properties and click on it, then highlight "CLIENT SERVICES for NETWARE" and click the "UNINSTALL" below

Tags: Toshiba

Similar Questions

  • Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

    I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

    The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

    Any ideas would be greatly appreciated.

    Hello

    Did you use and install the drivers from the Toshiba driver page right?
    The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

    But please pay attention to the Toshiba drivers.
    There are two different sets of Satellite Pro A120, with different drivers W2k!
    After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

    I think that if you follow this guide line everything works and runs correctly. Good luck

  • Satellite Pro A120 (PSAC1E) - TV problem

    Hello
    My laptop "Satellite Pro A120 (PSAC1E)" computer does not connect to any type of TV (digital or analog). I tried many different kind of connections to SCART-VGA to VGA-HDMI. I think something is wrong with the VGA output because apparently the Intel graphic card supports the TV/monitor output as the software driver suggests. However, I can't connect the laptop to an external monitor rather easily and without hassle.
    Someone there has the same problem and if so, do you have a solution to this problem (everything!).

    Thank you

    KAV

    Hello

    As far as I know NOT ALL Satellite Pro A120 PSAC1E are equipped with the video output jack!
    I see you are using an external monitor connector!
    This port can ONLY be used with external display (screen) or a projector, but NOT with the TV!

    The TV can be connected to the s-video port that is not available!

  • Satellite Pro A120-161 memory problem

    I own Toshiba Satellite Pro A120-161 (plug here: http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=UK&PRODUCT_ID=121988&toshib aShop = false #0)

    It is said that the installed memory is DDR2 (533 MHz) RAM, so why don't new CPU - Z (http://www.cpuid.com/cpuz.php) says that my installed memory has a maximum bandwidth of PC2-4300 (266 MHz)?

    Hello

    > Why new CPU - Z says my installed memory has a maximum bandwidth of 266 MHz PC2-4300
    It s a DDR2 memory module 266 MHz this way 533 Mhz don t worry, everything is ok!

    PS; I searched on the net for this memory module and it seems that it supports 533 Mhz

  • Satellite Pro 4270 and network problems

    I just got a laptop, Toshiba Satellite Pro 4270... I installed win 98 on it and it works beautifully.

    But then I added LAN PCMCIA card in computer and wanted to do some sufring. I encountered a problem.

    In the next devices, win98 reports error handler:
    The NDIS. VXD, NTKERN. VXD or Chargers device for this device could not load the device driver. (Code 2).

    The card is 3Com Fe575C and I downloaded the latest drivers from www.3Com.com/warranty, but that did not help. I also ran regclean and reinstalled the card after that. Always the same fault. With my own laptop (win2k pro), the card works perfectly with no additional drivers, so the map itself is not defective.

    In addition, the Win98 find PCI card when starting, but I have no driver for that... Where can I get that? It does not specify which card that is...

    Hello

    I guess it is Win 98 Second Edition You are using on the 4270.
    Please go to driver download site and download the INF-update to the PC Card controller. I think this should solve your problem.

    While you are at it download the other drivers you need more.

    BR

    Tom

  • Satellite Pro A120 - drivers need for ethernet and network

    I rebulit a Toshiba Satellite Pro A120 (PSAC1E) with XP pro and I'm having a hard time finding drivers for the * Ethernet controller * and * network controller *.

    I downloaded all the drivers available from the site Web of Toshiba and installed these LAN and WIFI still do not work, I downloaded Intel drivers also and they have also failed to get the devices to work.

    Does anyone have a possible solution for me?

    Try the drivers from the Toshiba site and there you can also download the installation instructions:

    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  • Performance on a Satellite Pro A120-185 with Windows Vista problems

    Can someone help me with this.
    My laptop is a new Satellite Pro A120-185 with Windows Vista.

    I had my last configuration less portable, but you know what? He was faster!

    I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

    It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

    Clicking on something takes forever. What's wrong?
    Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

    Hey dude,

    Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
    There is a huge difference between Vista and early Microsoft operating systems.

    The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

    In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
    All programs and utilities could be loaded more quickly

  • Satellite Pro A120 battery problem

    Hi all

    I have a portable Satellite Pro A120 and is a battery problem a month ago.
    The battery is not new, but recently changed, 6 months ago.
    Until a few weeks ago, it lasted about 2 hours when full load, until this time
    suddenly dropped 30-40 minutes.
    In addition, sometimes the power of the laptop turns off when it's a few extra vibrations,
    for example, if I put it on a table without the maximum protection.
    In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

    I initially though that there was a problem with the battery or the battery contacts, but they seem ok.
    I tried to unload it in my laboratory of the company with a power resistance: resistance absorbed 1A continuously for more than 3 hours. As the specification 4400mAh battery, I would say that the battery is ok.

    Is it possible that I have a problem with the battery inside the pc management circuit?
    The battery stress test above seems to show that the charging process is ok. So the problem might be with
    the provision of monitor or battery power.
    Someone at - it experience of similar problems and maybe a solution.
    Or perhaps a work around? As excluding the battery monitoring and auto turn off

    Thanks in advance
    Concerning

    > Is it possible I have a problem with the battery inside the pc management circuit?
    Perhaps, but that's just a guess only a cellphone technician may provide an exactly the answer to this question.

    > Furthermore, sometimes the power of the laptop turns off when it's some additional vibration.
    for example, if I put it on a table without the maximum protection.
    In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

    It is very strange, I want to say if the contacts of the battery and the battery would be ok, this symptom shouldn't its sounds strange for me, so maybe that's the key why battery don't not lasts more than 30-40 min

    However, I think you should try a new battery before checking the motherboard.

  • Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

    Hello

    I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

    My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

    If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

    Thank you very much

    Cblack

    Post edited by: cblack

    Hello

    just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
    We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

    It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

    Would appreciate comments on your part.

    See you soon

  • How to install the driver LAN for Satellite Pro A120

    In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
    The issue that there's no facility to do to complete the installation.

    And theres other question that I need the Ethernet controller

    My laptop was vista operating system installed, but I change and put Windows XP

    Please help me

    Hello

    LAN installation is very easy.
    First of all, you need the correct LAN driver.
    In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

    Once the LAN driver has been downloaded, you will need to decompress.
    Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

    Then finish the installation procedure.

  • Often, a WiFi on Satellite Pro A120 falls

    Hi all!

    Hope someone can help me here.
    First: sorry for my English!

    I am owner of the Satellite Pro A120. I only use the connection with what is provided by the defined Intel 3945 ABG wireless.
    The machine runs on XP SP2.

    When you are working on the laptop, aswell as on the card battery, every now and then the grave wireless conectivity. Immediately he reconnects. But it is especially embarrassing when I'm on the corporate network, so I work. I immediately make me driven.

    To check if the wireless modem I use, I asked my girlfriend (who is also wireless connected with another laptop) If here connection fails as well whne mine. This is never the case. So, I thought: there must be something with the Toshiba.

    Everyone recognizes this problem and has a solution?

    I already did these things:

    Check the powersaving options are set to off ";
    Updated the driver;

    These actions have not solved the problem

    thnx in advance!

    I found another thread on the same topic that you posted here in the forum:
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=111772#111772

    Because what allows to trace the case, please follow only a single post.

  • Satellite Pro A120 - battery not found

    Hello

    Technical details: I have a Satellite Pro A120, purchased about four years, running MS Vista. A year ago I noticed my battery has been virtually exhausted and bought a new battery (this one, to be exact: [http://www.amazon.com/gp/product/B0028NJAL2]). Since last year it worked very well and I have no reason to suspect that the battery itself might have a problem. Most of the time, I have the laptop plugged in, in any case.

    However, recently (last few weeks, I think) I started to have occasional problems when all of a sudden I am notified that the battery can not be found - or rather, there is no actual notification, but the power icon in the changes of system tray with a small red on it X, and then the computer hangs. The touchpad still works and I can move the pointer on the screen, but absolutely nothing else says and there is no way out next to a hard reboot. Sometimes, if I catch the icon change from time to time and unplug the power cord (force the computer running on battery), it actually corrects issues. Not always, though.

    Attempts to seek similar problem descriptions online were not very useful; most of the time, the description does not exactly fit my situation or the Seraph blames the battery or the operating system (which, in my case, to be as the wrong answers, since I said the battery generally works well, and I had the same OS from the start). Also a search of these forums did not have no useful result. I'll call my go - to computer store and see if their engineers have all the answers or if it's just the time to take the old horse pasture and find a new filly, but thought that perhaps the good people on this forum may be able to offer advice (additional).

    Thanks in advance,
    Yael

    > Attempts to seek similar problem descriptions online were not very useful; most of the time, the description does not exactly fit my situation, or the Seraph blames the battery or the operating system (which, in my case, to be as the wrong answers, since I said the battery generally works well, and I had the same OS from the beginning)

    I think that no one will be able to tell what's wrong exactly; I think it is s battery issue but of course, no one can say it it s battery maybe motherboard or just a software problem. OPERATING SYSTEM.

    Usually, the software should not affect the functionality of the battery and I think that it s more material associated.
    The laptop is a little old and the battery seems to be old too so I think that the battery needs to be checked first

  • Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

    Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
    Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
    Have you tried the following:
    Setting of various parameters in the graphics properties and in the bios but makes no difference.
    It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
    It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
    I tried to start with / without battery - no difference.
    I tried to start without the disk HARD - no difference.
    I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
    I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
    I'm out of ideas and looking for a genius to fix it for me please!
    See you soon

    Hey Buddy,

    > It turns on but not at all to see clear
    This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

    It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

    In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

    Good luck! :)

  • Satellite Pro A120 - no power supply the AC adapter

    Hello

    I recently had some problems with powering the my Satellite PRO A120. Initially I was not getting any power to the laptop of my adapter. I bought a new card on ebay that seems to have solved the problem as my laptop turned on once more, even if I could use it only for a few minutes on the stand alone mode as it would drain completely after a few minutes. After a few weeks, the adapter has stopped working. This led me to believe that my battery might be the problem that caused the adapter switch defective.

    I then bought a battery of reco and tried to see how long he would stay on without the adapter - even once the laptop only lasted a few minutes before I die

    I can only use my laptop with a power adapter borrowed right now. The battery is the cause or is there an underlying problem with memory or the motherboard?

    It will be expensive to fix or should I try to buy a battery and the original power cord and see if it works

    Your opinions and comments would be greatly appreciated.

    > After a few weeks, the adapter has stopped working. This led me to believe that my battery might be the problem that caused the adapter switch defective.

    It is a nonsense. The battery does not affect the power adapter!
    The battery loses own performance during use of the laptop and sooner or later, the battery will discharge.
    This is nothing unusual happens to all batteries

    In your case, it could be a defective battery and AC adapter malfunction
    It is very rare that the two parties would begin to malfunction at the same time, but it possible s

    However, in my view the laptop must be tested using the new battery and AC adapter.

    Welcome them

  • Satellite PRO A120 BIOS PASS RESET BIOS RESPONSE CODE.

    Hello
    I have a portable Satellite Pro A120. Has long been asking me a password when starting.

    The BIOS password prompt:
    ALERT: System protection failure.
    Password =

    I found a place that is the problem of BIOS and should be updated. Official toshiba ASP 67 fees plus costs of delivery to reset the BIOS. Somehow, I find that pressing TAB, CTRL, Shift and ENTER the Code response request.
    The ASP can provide this code for free?

    Thank you.

    Hello

    To be honest, I have no idea about these codes. Try contacting Asp ask them if they offer this code, don't think not if someone can answer this question in this forum.

Maybe you are looking for

  • T410 does support 2.5 "and 1.8" SSD?

    I saw a couple of L410 using1.8"SSD and I wonder if this model (Thinkpad T410/T510) has any restrictions of use 2.5" SSD I should know before to upgrade my HD. Has anyone installed a 2.5 SSD "in a Thinkpad L410/L510? or... does anyone know why lenovo

  • Current product key does not match.

    I just bought Windows 7 Edition Home Premium on shelf from a local retailer. I went to install the 64 bit version on my Mac to use in conjunction with Parallels desktop. The installation seems to go along fine until I was invited for a product key. I

  • I continue to receive emails, I read on my PC when I swith on my laptop

    I have a PC and a laptop to access Windows Live Mail using Windows 7. When I read messages on each device and then transfer to the other device, I get the same messages being downloaded. Can someone tell me how to stop this. Thank you very much.

  • Golden fish not displayed icon

    Hi allI've recently updated 11.1.2.3 to 11.1.2.3.2 FDMEE... All my imports work well, but I am facing a strange problem where Golden fish icon not getting not appear when I do any stage of FDM. I'm just a cross mark with message import successful in

  • HELP (adobe first pro cc) I mixed my scenes and cannot change individual sequences more!

    Somehow, I mixed my clip pitch (music, scenes and titles) and cannot change scenes more (mounting clips are now green. How do I return my scenes?