Satellite Pro A120: No reason apparent IExplorer closes

Without apparent reason, Internet Explorer announces that it has encountered a problem and needs to close, I can run Outlook Express, MSN Messenger and can access the internet using Mozilla Firefox but despite having downloaded Internet 7 again, this will not work.

I use a Satellite Pro A120 with Norton Internet Security 2006 which is updated, I have a virus scanner and found nothing, which can be the fault.

Hello

delicate sounds of HM.
Just a few questions:
-What service pack is installed?
-What updates microsoft and patches are installed?
-have you checked the Web microsoft and google for this error page?

And my last question: why would you use IE? In my opinion, Firefox is much better and faster than IE. :)

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite Pro A120: Need to update the BIOS after upgrade CPU

    Hello

    I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
    The laptop works very well, but for some reason any with the new processor fan runs always full.

    A lot, I searched but found nothing.
    The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

    THX in advance,
    John

    Hello

    First of all: update BIOS doesn t help you.
    Why do you think that BIOS update should help reduce the activity of fan?

    I guess that your new processor is faster. Right?
    So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

    By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

  • Satellite Pro A120 - battery not found

    Hello

    Technical details: I have a Satellite Pro A120, purchased about four years, running MS Vista. A year ago I noticed my battery has been virtually exhausted and bought a new battery (this one, to be exact: [http://www.amazon.com/gp/product/B0028NJAL2]). Since last year it worked very well and I have no reason to suspect that the battery itself might have a problem. Most of the time, I have the laptop plugged in, in any case.

    However, recently (last few weeks, I think) I started to have occasional problems when all of a sudden I am notified that the battery can not be found - or rather, there is no actual notification, but the power icon in the changes of system tray with a small red on it X, and then the computer hangs. The touchpad still works and I can move the pointer on the screen, but absolutely nothing else says and there is no way out next to a hard reboot. Sometimes, if I catch the icon change from time to time and unplug the power cord (force the computer running on battery), it actually corrects issues. Not always, though.

    Attempts to seek similar problem descriptions online were not very useful; most of the time, the description does not exactly fit my situation or the Seraph blames the battery or the operating system (which, in my case, to be as the wrong answers, since I said the battery generally works well, and I had the same OS from the start). Also a search of these forums did not have no useful result. I'll call my go - to computer store and see if their engineers have all the answers or if it's just the time to take the old horse pasture and find a new filly, but thought that perhaps the good people on this forum may be able to offer advice (additional).

    Thanks in advance,
    Yael

    > Attempts to seek similar problem descriptions online were not very useful; most of the time, the description does not exactly fit my situation, or the Seraph blames the battery or the operating system (which, in my case, to be as the wrong answers, since I said the battery generally works well, and I had the same OS from the beginning)

    I think that no one will be able to tell what's wrong exactly; I think it is s battery issue but of course, no one can say it it s battery maybe motherboard or just a software problem. OPERATING SYSTEM.

    Usually, the software should not affect the functionality of the battery and I think that it s more material associated.
    The laptop is a little old and the battery seems to be old too so I think that the battery needs to be checked first

  • Satellite Pro A120 hangs sometimes

    Hello

    I've had my Satellite Pro A120 for a little over a month now, and during that time, he has frozen maybe five or six times. This is the type of crash response system, which completely stops can be recovered by using the Task Manager to end the process, and the only cure is to turn off and on again. When this happened, the laptop did not turn all particularly demanding programs, maybe Word, iTunes, or Mozilla Firefox.

    This could be due to overheating? The Unit feels often hot to the touch around the vents on the left side, but not excessively hot. Is there a utility I could use to see if all the material is defective?

    I ran the Toshiba PC diagnostic tool, but it says the hard drive, processor and memory are all very well.

    Hello

    Well, it's not easy to say why it happened.
    Yes, your suggestion is good. Something like that could happen if the temperature is too high. But if the laptop overheats the operating system should stop the unit automatically without warning.
    However, to avoid overheating, don't forget that there is enough free space around the laptop for a good air circulation.

    But also the software problem could be a reason for any frizzing. Then the OS on my laptop s brother frisottés several times. I just installed the fresh WinXP and since then everything is ok.
    You should study a bit

  • Satellite Pro A120 - I want to upgrade the RAM

    Hello

    I'm looking to upgrade the RAM in my Satellite Pro A120 Model No.: PSAC1E-05C00VEN

    I'm getting conflicting reports as to how this can actually take, some sites say a 1 GB maximum per slot max so 2 GB while most of the others say max 2 GB per slot

    I was hoping you could advise me.

    Thanks in advance for any help you can offer.

    Hello!

    Your Satellite Pro A120 is equipped with the Intel 945 GM chipset and so you can upgrade it to 4 GB of RAM.
    Only models with ATI chipset can be upgraded to 2 GB and I think this is the reason why some sites say that it can be upgraded to 2 GB and others at 4 GB.

    However, for the upgrade of RAM DDR2-RAM PC2-5300 (DDR2-677). You can buy 2 GB modules for a maximum of 4 GB.
    But don t forget that only a 64 bit OS supports 4 GB of RAM.

    Good bye

  • Satellite Pro A120: I have a warranty available without proof of purchase?

    Hello

    My laptop Toshiba Satellite pro A120 computer has been giving me problems after problems; I posted my problems everywhere online on popular technical websites, but without a lot of help similarly really cleaver people;

    I bought this new laptop a companion, who got the laptop from his University under a credit. Laptop computer was brand new, it was not open yet, and the box was all stickers, serial numbers, also the address of the man in the Middle maybe the company or purchased from the dealer.

    The problem is that my friend has lost the receipt that was given to him. Can I still get a fix for my laptop, even without a receipt? I have the box and all the other info written about, they can check that the laptop is indeed legitimate.

    Thank you very much, and I hope to read some good news for everyone.

    Mo98183.

    Hmmm usually you ALWAYS a check for sales to prove that the device was purchased within a reasonable time and that this unit belongs to you
    To my knowledge if this laptop has been saved on the Toshiba supports site then the spans two years guarantee must be valid. The Toshiba service partner should then be able to check whether the warranty laptops is still valid.

    I think you should definitely contact the ASP in your country for details on the restrictions of the warranty and how to manage if something will be wrong with your hardware for laptops.

  • Satellite Pro A120 (PSAC1E) - TV problem

    Hello
    My laptop "Satellite Pro A120 (PSAC1E)" computer does not connect to any type of TV (digital or analog). I tried many different kind of connections to SCART-VGA to VGA-HDMI. I think something is wrong with the VGA output because apparently the Intel graphic card supports the TV/monitor output as the software driver suggests. However, I can't connect the laptop to an external monitor rather easily and without hassle.
    Someone there has the same problem and if so, do you have a solution to this problem (everything!).

    Thank you

    KAV

    Hello

    As far as I know NOT ALL Satellite Pro A120 PSAC1E are equipped with the video output jack!
    I see you are using an external monitor connector!
    This port can ONLY be used with external display (screen) or a projector, but NOT with the TV!

    The TV can be connected to the s-video port that is not available!

  • Satellite Pro A120 - where the guard & easy to Toshiba Assist button

    When I bought my Satellite Pro A120 he had on his keyboard a large circular red label - ' test it! Toshiba Easy Guard "and"Button to help Toshiba"but I can't find the Toshiba Assist button on my laptop."

    Someone has found the way to get to this?

    Hello

    Toshiba Easy Guard is not a simple also, but a collection of properties of different portable computer that secures your notebook.
    Check out this page of Toshiba Easy Guard:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/TOSHIBA_EASYGUARD_08/

    Toshiba Assist button would start the Toshiba Assist tool:

    You can optimize the button in this way:
    1. start the Toshiba Assist utility using one of the methods described above.
    2. in the left side of the Toshiba help window, click the OPTIMIZE.
    3. in the window to optimize it, click the icon of the TOSHIBA button controls.
    4. in the properties of controls on Toshiba window, ensure that TOSHIBA help is selected in the drop-down list in and then click OK.
    5. close the TOSHIBA help window.

    Check this box:
    http://IE.computers.Toshiba-Europe.com/innovation/FAQ.jsp?service=IE&FID=TIU0000003562

  • Satellite Pro A120 - cannot boot from CD/DVD drive

    I have a Toshiba Satellite Pro A120 of friends, he was running very slow so I said I'd do the usual for him.
    Back up all his documents, and then reinstall windows. not so easy!

    First of all, try to boot from the CD so I can boot into Ubuntu or reinstall windows.
    Me has taken long enough to work, I had to press DEL/ESC to enter in the BIOS, but once I put to boot from the CD (and was a bootable CD in the drive), it kept just boot from the HARD drive.

    From time to time I get an error saying + "Media test failure - check cable" + or something similar, theres a lot on internet on this subject.
    I think its something to do if the boot order has CD first, then it has LAN as 2nd.

    Able to boot Ubuntu from a USB key.
    Try to copy its documents on my external drive but really copying REALLY slow (like 1 MB/s) and kept getting IO errors on some files.
    I can't run diagnostic software for HARD drive that I can not boot from the CD (could get the Ultimate Boot CD on a USB but if anyone thinks it would help?).

    In windows, the CD player only reads real CD (audio similar DVD, not CDR and DVDR).
    This means a failing drive?
    What intrigues me most, however, is that I changed the portable CD player with a CD of work of another computer and windows recognize today this new CD player at all!

    By putting a bootable CD in this new CD player, it always starts from the HARD drive (do not recognize CD player in all).
    The BIOS is a bit unnecessary and does not show the detected disks...

    Also, boot Ubuntu from a USB key, with the original CD player, he reads real CD and DVD copied of all zeros are considered blank discs and replace the CD drive with a known working in Ubuntu means its not recognized at all (if this isn't windows driver problems).

    When I started messing around with it I remember windows say the time had been reset, so I set the time properly, then he did the same thing again I think. A flat CMOS battery could not be responsible for this?

    Is the motherboard and specifically the IDE controller or a broken ports, or am I doing something stupid? I'm tempted to just install Ubuntu by USB and tell him not to bother with CD more ;^)

    Any suggestions or comments would be much appreciated!

    Thank you
    Dan Gent

    > Me has taken long enough to work, I had to press DEL/ESC to enter in the BIOS, but once I put to boot from the CD (and was a bootable CD in the drive), it kept just boot from the HARD drive.
    You see the CD/DVD drive in BIOS? I mean all the details like the name WEIRD etc.
    If this isn't the case, then it means that your CD/DVD drive is not recognized by the BIOS due to a hardware problem.

    If you can see the STRANGE in the BIOS but are still not able to boot from any disk, then I suppose that the CD/DVD drive cannot read the disk for different reasons.
    One of the reasons could be a defective or damage the laser lens

    > Every so often, I would get an error saying "Media test failure - check cable" or something similar, theres a lot on internet on this subject. I think its something to do if the boot order has CD first, then it has LAN as 2nd.

    Yes, this error means that your laptop tried to boot from LAN

    > In windows, the CD player only reads real CD (audio similar DVD, not CDR and DVDR). This means a failing drive?

    As I said above, it would be possible that the reader s laser lens malfunctions and, therefore, the ODD can't handle the media. It seems that the laser lens can not calibrate properly and can not move in the correct position. This question is not repairable and the drive needs to be replaced.

    > What intrigues me most, however, is that I changed the CD drive with a CD of work of another laptop and windows don't recognize this new CD player at all!

    The fact is that not all CD/DVD drives are compatible due to different master/slave/C-salt settings. You must use the supported players! In most cases, you can find a list in your user manual what CD/DVD readers are compatible.

  • Questions of OpenGL on Satellite Pro A120

    Hello

    I started to notice this when I installed the Google Sketchup application - which allows to use all the hardware graphics acceleration via OpenGL.
    When I have the OpenGL option on, it no longer displays the objects created successfully. When I turned it OFF, it of very well and works correctly.

    He was not a train smash.

    As curiosity got to me, I have installed some games, namely Dungeon Siege: Legends of Aranna that uses the built-in graphics card: Mobile Intel (r) Express Chipset 945GM. Obviously, something with the graphics driver just did not work properly. I can't find a new update of pilot beyond the one I have. I'm really not worried about the game, I'm more worried about not be able to run Google Sketchup with OpenGL! It makes a big difference with OpenGL support!

    I tried downloads graphics chipset from Intel, and he told me that I should talk to Toshiba... so here I am...

    I would really like to know what I can do at this point... because it affects my work.

    My system is
    Laptop: Satellite Pro A120 (PSAC1E)
    Mobile Intel (r) Express Chipset 945GM with the driver version: 7.14.10.1147 (current download from Toshiba)
    DirectX 10

    Thank you.

    Hello

    in your case, I'll try the drivers from the Intel site that could possibly solve your problem. There could also be a chance for a solution by visiting opengl

    -> http://www.opengl.org/

    and download the latest version of OpenGL. Perhaps it would be worth updating your DirectX because this could also be a reason for your problems of OpenGL...

    Welcome them

  • Satellite Pro A120: DVD/CD burner does not burn audio and video files

    Hello

    I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

    When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

    I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

    Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

    Can you help me please to solve this problem?

    Hello

    I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

    Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
    According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

    I also have another idea.
    Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

    Please check this doc MS:
    http://support.Microsoft.com/kb/270008/en-us

    Completely remove the Upperfilters and Lowerfilters from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    .. .and see if it helps.

  • No sound of Satellite Pro A120

    Hello

    I recently lost all sound on my Satellite Pro A120. I am running XP SP2 and tried to uninstall and reinstall the Raltek drivers. Before that I went through the windows help program, but that only told me that everything was working fine. Can someone help me please.

    *@Allen237*
    Tecra 9100 is oldie! Don t compare this notebook with a series of Satellite A120.
    The sound does not work because the Yamaha audio driver does not support the Microsoft SP1 and SP2! This is the reason!

    *@jeffjames*
    To get the sound on the XP all Microsoft patches and hotfixes must be installed! Use the MS update page to get all the updates!
    Very important are the audio patches; KB835221and KB888111

    Remove all audio drivers, install patches and then after restart the compatible audio driver!

  • Satellite Pro A120-154 - how to remove the HARD drive password?

    Hello

    I have the following problem: I set a password for the HARD drive in my old Satellite Pro A120-154 years ago, and now I want to remove or change the passowrd since I'll give you this laptop for my nephew. Instead I don't know the password, I am not able to change or remove, not with the password of Toshiba uitility program and not with the BIOS set up.

    Further I can't find any info on this in the user manual. How can I do this?

    Thanks Tino

    Hello

    I found several useful documents from Toshiba on HARD drive password. Please take some time and pick up some info on HARD drive password and how it works.

    http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
    http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
    http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

  • Prerequisites for the replacement of Windows XP for Satellite Pro A120-107

    I don't know that it will have been asked before, however...

    I received a Satellite Pro A120-107 XP. Because XP is not supported, I would like to upgrade to Windows 7, 8 or 8.1. Who should I go for?

    I think I need to improve my memory (currently 512 MB) at least 1 GB. Or should I go to 2 GB. Which would be better?

    And I need a BIOS upgrade? He is currently using vn 1.50 08/24/2006. If I do, what version?

    In your case, I'll try to install Win 7 on this good old classic.

    8.1 Win is the latest system from Microsoft but I'm afraid, you will have some problems with drivers m.

    Win 7 would be the best choice in this case

  • Upgrade SSD for Satellite Pro A120

    Hello
    I have a satellite pro A120, which feels a little tired. I did research SSD upgrades to replace the HARD drive, but I don't know if I can update or not. I would really appreciate any advice or information you can give me.

    Thank you

    Hello

    You can upgrade the laptop with an SSD. You need a disc SSD SATA 2.5 as the A120 supports the SATA controller.
    Not quite sure about the SSD size but I guess a 250 GB should be recognized correctly.

Maybe you are looking for

  • illegal mode 0 x 72 in GenEA

    Hello I have a LV 2010 project and I wanted to build now in LV 2011. When I try to do that I have received a message "illegal mode 0 x 72 in GenEA», and that comes in the main vi. Cannot open, LV is telling me that he was not possible to compile the

  • Take a large green arrow in the corner of all my photo files

    Every time I have to add a photo or import any kind of image, a large greeh check appears in the corner of each. Makes it very difficult to see what the image.  I have tried everything I know to get rid of him.  I must have accidentally put it, becau

  • System event notification services error

    A couple of weeks, I started getting a message at startup in VISTA. The message appears in the lower right. It is said:Unable to connect to a windows service. Windows could not connect to the System Event Notification Services service. This problem p

  • Trying to install my AutoCAD LT 2002 old on my laptop with Windows Vista.

    What should I do to install my old AutoCAD LT 2002 software on my new laptop which uses Windows Vista Home Premium?  Is this possible?

  • Error C00D11B1 Windows Media Player (Windows 7 x 64).

    I get error C00D11B1 when you try to play any multimedia file on WMP. I have spent hours looking on the forums and tried all the solutions given and nothing has solved the problem. I tried to use Media Player Classic and there is no audio data with v