Satellite Pro A200: Wake up to the keyboard using a USB keyboard

Similar Questions

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro A200 does not recognize the hard drive, XP Pro

  When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.

  Any help appreciated

  Dave

  Hello

  If you are using the 64 bit OS, then also use 64-bit drivers.
  I found very nice HowTo from Toshiba.

  Check it! It s certainly interesting and should be useful.

  * + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Re: Satellite Pro A200: can I get the drivers of preinstallation discs?

  I have Toshiba Satellite Pro A200 (PSAE1E) with XP Pro.

  I made a mistake and tried to update the Realtek audio drivers, knit drivers, but does not show the Realtek HD Audio Control Panel to the top, not in the system tray, or in the Control Panel folder.
  I contacted Realtek, they gave me a program that analyzed my HW and then they said that my phone is not supported, I must ask the crazy drivers my manufacturer, laptops, Toshiba.

  I tried the drivers that were running [Toshiba - download drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] page, but those who did not work either.

  So, there is one thing I can do, if it is possible, how can I get drivers of Toshiba recovery disks, without having to reinstall everything again?

  Something like this is not possible. Recovery image is somehow the package, you can not only pilots.
  Have you tried to roll back the OS (System Restore) before you did this updates?

• Satellite Pro A200 error (PSAE4E) during the firmware update Disc Creator

  Hello

  I get the following errors when you try to update firmware for Disc Creator I use Windows VIsta Home Premium.

  An unexpected error has occurred.
  Error code: 32007C-26-00000015

  Followed by:
  Error code: 320129-26-00000015 - then application goes down.

  All solutions to this
  Thank you

  Hi guys

  I'm a bit confused of m.

  > when you try to update firmware for Disc Creator
  Where did you get the firmware update for Toshiba Disc Creator?

  I checked the page European driver Toshiba and Satellite Pro A200 (PSAE4E) download area and, unfortunately, I didn t find updates for Toshiba Disc Creator.

  So I really wonder about this problem. He s strange

• Satellite Pro A200 where to download the recovery disks

  Is anyone know where (or if) I can download installation / for the Toshiba Satellite Pro A200 recovery CD.

  See you soon,.

  The recovery CD can not be downloaded!
  Must order it from the ASP in your country if you have damage or lose!

  But I really don t understand why you ask this question! These questions are answered several times! First check the existing threads before you ask for something!

  concerning

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• Satellite Pro A200 - new ODD ignors the recovery disk

  Hello

  _Satellite pro A200-PSAE4E Windows XP_

  I started having bad 'not ready' system on the STRANGE original errors. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H TO01. I tried the FW update, but that did not help.

  I replaced the STRANGE with a new Amazon. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H SC04. The STRANGE news is listed as appropriate in the manual - it is the same model as the original. The STRANGE new works fine for normal use in XP. But when I try to use the recovery disk, it is ignored and XP always starts on the HARD drive. And when I press F12 during startup, the STRANGE news is not listed.

  Can you help me get the STRANGE recognized at boot time, please?

  Thank you.

  Mike

  Hello

  Have you ever tried to load the settings by default in the BIOS and is it recognized in the BIOS setup? The default values of the BIOS, you can load if you go into the BIOS, press the F9 key and save & exit the BIOS Setup. Then, restart the computer and try again to start from ODD.
  Can you change the boot order and set the STRANGE as first boot device?

  If it doesn t help I'll try a BIOS update. The most recent BIOS can be downloaded on the official website of Toshiba.

  But it s really strange the player works fine on XP, but you can start with him t

• Satellite Pro L300-1AD - mapping of the keyboard in the BACK

  Satellite Pro L300-1AD. Windows 7 Professional

  "When you use edit.com to write batch files the ' ' ' on shift2 key and the ' @' shift @ are transposed.
  They work correctly in word and invite him to command, but not in edit.com.

  Any ideas how to fix this please?

  Hi mate

  Have a look here:
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/15633817-521C-4e05-B09D-3a3069ff62ac

  Maybe it could be useful

• Satellite Pro L100 - how to remove the keyboard

  I have a L100 which has been "sprayed"... don't ask...

  How to remove the keyboard... ideas please

  see you soon

  Bob

  Hello Bob

  The keyboard replacement procedure is almost on all Toshiba laptops. At, first of all it must remove the cover above the keyboard (where the buttons are placed).

  After doing this to remove the keyboard is very easy.

  BTW: is your laptop under warranty? Please be careful about this.

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro A200 - vertical scrolling on the touchpad doesn't work does not after update

  Hello

  My A200 told me that I needed to update the drivers for my touchpad. I did it and now I can't use the vertical scroll feature. I looked on the site Web of Synaptic and there is nothing there to help. I checked to see if I have the drivers updated and I do, and I've looked through the settings of the mouse and can't find anything that will help you.

  Can someone help me please?

  Thank you very much
  Ian

  Hi Ian

  Why you n t trying to roll back the BONE to this early time?
  I mean the point OS before you installed the touchpad driver

  Usually, this should help to recover the functions first touchpad.

  Best regards

• Satellite Pro A200 - HDD recognised by the BIOS but not in the startup list

  Hello

  After some problems with the virus of my laptop is not able to start more. How reset BIOS ignores the boot from the HARD drive and try to start either from CD or network. The HARD drive is recognized by the BIOS (it appears as 1 hard drive in the home page). In the selection screen startup list preferences appear only floppy drive, CD/DVD and network.

  The hard drive can be mounted and browsed without any problem of windows or Linux. I tried to install both systems and the installation always succeeds but when rebooting the system is not able to boot from the hard drive.

  I guess it's a BIOS problem, but I'm not sure about this. What do you think?

  By the way how do I update the BIOS without having neither windows nor floppy drive?

  Thanks in advance

  Hi mate,

  I m a bit confused now as a first step, you wrote that the computer can boot from the HARD drive, but then you t wrote you browse the HDD with Windows and Linux

  I'm not sure this is the problem of this but I recommend to load the default settings in the BIOS.

  If your HARD drive doesn t work could be defective (bad sectors or something else). You could test with special diagnostics as Drive Fitness Test Tools. It s a freeware tool so you can find it using Google.

  By the way: have you tried to install Windows with the Toshiba Recovery disk?

• Satellite Pro A200: Where to find the driver for touchpad

  My touchpad had problems, so I removed, now I can't find the driver for it, any suggestions?

  Thank you.

  P.S, model number is PSAE1E

  Have you checked the page European driver of Toshiba?

  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, you should be able to find your notebook series and drivers needed touchpad.