Satellite Pro A300-28V - my bluescreens disappeared when the BIOS has been upgraded

Similar Questions

• Satellite Pro A300-28V - cannot create own recovery disks

  Have a portable Satellite Pro A300-28V with Vista Business 32. After a HARD disk recovery partition recovery, I decided to use the PC function full system backup to make a picture for later retrieval with all my current settings. Too inconvenient for factory reset default (Thunderbird 3.0 Mail, Open Office and some other small applications already running no problem for years on another computer in the office).

  The system needs 5 to 9 DVD and he wrote the first DVD. Takes about 30 minutes. Then, during the audit of this disc, it crashes. Audit bar stops at about 30% complete.
  Anyone with this experience? No, the company "Complete PC Image" works well on an OEM of Vista installation?
  Or maybe it's the DVD player in need of an update? I do not use a 3rd party burning software.

  / Sweden

  Hello

  What program you use to create your own recovery discs? For example, I mean Acronis, Norton Ghost, etc..

  In your case I would try with another program like Nero or CD Burner XP burning.
  In addition, you can try to remove upper and lower filters in the Windows registry, maybe that will work.

  Finally, and especially on the Toshiba site, you can check if there is an update to the firmware of your CD/DVD drive.

• Satellite Pro A300-guest 1GT - error message when starting webcam

  I have a Toshiba Satellite Pro A300-guest 1GT. The problem is that the camera does not work. When I run the software, he writes that I have to restart camera or computer. I have Windows 7 and I have serched internet solutions but I find just a discusions with the same problem without solutions.

  Sory for bad English may.

  Hello

  Have you tried reinstalling the driver for the webcam? You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Before installation: remove the driver current webcam and restart your computer. Try a registry cleaner like Ccleaner, then stop and try again. Now, you can install the latest driver for the webcam.

  I hope it works! :)

• Satellite Pro A300-28V - black screen boot failure

  My three days old Satellite Pro A300 began yesterday to hang at startup in Vista. I rebooted twice with good result, but now I see only the home Toshiba screen, then it goes black with a cursor top left. I won't answer on /F12/ F8 F2 or the recovery of the DVD. Indicator LED disc is black, fan-only sound. I have connected not no matter what external monitor ever on this one.

  At the moment so it's Sunday I chose the battery and will try again in an hour or two, otherwise I contact seller tomorrow. Any ideas what's happening? BIOS crash, hard drive (after three days)?
  / disappointed

  Hello

  Does this mean that you can t access the BIOS too?

  If it s, then it seems to be a hardware problem. Therefore, the service provider authorized in your country. They can help you to repair the laptop.

• Satellite Pro A300: Bluetooth headphones sound decreases when it is connected

  Hello

  I have a pair of headphones Creative SE2300 Bluetooth that I use with my Satellite Pro A300 and its built-in bluetooth.

  They connect well and work as they should (including the A2DP and AVRCP) except that the sound cuts every 20 seconds or more for anything from a fraction of a second for a couple. Abandonment of sound is completely intermittent no apparent reason for it.

  Now earphones Creative also came with a transmitter to connect to any helmet and the connection to it works perfectly with no decline in the sound. I also connected the earphones to my phone and it used to listen to music, and once again the connection is flawless.

  So why the connection to my laptop is so bad?

  I have improved the battery Bluetooth to the last v7.00.16 (T) and my headphones are fully charged.

  Any help will be very appreciated!

  You have any other Bluetooth connections configured for example data synchronization?

• Satellite Pro A300: No volume indicator displays on the screen

  Hello

  I have a Satellite Pro A300 with a volume knob. When you change the volume to use, it works (even if this does not work as the starting system which is really annoying, especially when you turn it on every day in a library) However there are usually no witnesses screen to show at what level the volume is at. Once, I saw a display flag which seemed to be apart Toshiba Hot Key Utility but it disappeared again after a reboot.

  It is really impossible to do not be able to see at what level the volume is such that you change. Can someone help me out here? Brands goes for anyone who can help me unravel so volume level start!

  Hi CiRi,

  try to use the "Fn + esc" key to cut your system...
  He will remain silent even for restart the computer...

  If none of the keys have a special feature of "Fn" reinstall the 'value added package' and 'hotkeys' of the toshiba download page.

• Satellite Pro A300-15V, I need help in the Organization of my startup list

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:

  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

  > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

  > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
  I think that this is necessary. It could improve your audio

  > Toshiba Power Saver
  This is important. It s an additional saving of Toshiba option for Win 7

  > Toshiba Flash Cards
  This tool controls the FN keys.

  > RAID Event Monitor
  Hmm so you don t have two hard disks, then you can try to disable it too.

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Printer lost access to internet when the router has been changed

  My HP Photosmart Plus is connected wireless to my macbook air and has worked well for years.  Our company has a wired connection, enter into a linksys/cisco router and it gives access wireless via an SSID on my mac and your printer.

  A few months ago, the router has been changed and they did something for cable and wireless.  Im guessing they're on separate subnets or something because it is another problem is that I can no longer view the others on the network who are wired, even if I could before.

  In any case, ever since this time, I noticed that some smartphones and tablets had no internet connectivity.  They were connected to the wireless network that gave my internet connection perfect Mac, their signal is just as strong, but they had no internet connectivity.  So I figured that the DNS' have not been read right by these smartphones and tablets, I manually added the DNS' using my mac and now these phones and tablets work very well.

  I guess it's the same problem with my printer now because the only thing that doesn't work is eprint and web services.  I get a message saying that the printer could not reach the server, try again.  Ive restarted the printer and it doesn't matter.  I can see it has a properly assigned IP and I can print wireless for it, but there is no internet access.

  How 'to add' those DNS IPs to the printer?

  Hello quique123,

  Welcome to the Forums of HP's Support.  I understand you get a connection error message when you try to activate your printer Photosmart Plus web services.

  I've included a link to another post with measures, including screenshots, on how to set manual of the printer an IP address manually and DNS servers. As you go through the post, you will notice that it is recommended to use the Google public DNS servers when you set manual DNS servers.  Please do not worry that the screenshots are for a Photosmart 7510, the steps are the same for your Photosmart Plus printer.

• How can I deactivate my CS3 photoshop when the program has been removed

  How can I disable my copy of Photoshop CS 3 when my copy has been deleted from my computer and is no longer accessible

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request activation reset account.

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• Satellite Pro A120 (PSAC1E-03Y010EN) no access to the BIOS

  Hi all

  I upgraded my OS from XP - Pro to Win7 Ultimate 2010 March, no problem everything works OK. Now that I need more space, I want to upgrade the hard disk of 40 GB to 320 GB.

  I can not access the bios to change the boot system (boot from DVD, for example), I can access the initial screen of the 4 menu at the start of the laptop but any icon highlight (disks, CD/DVD/etc), the laptop starts just Win7. I tried to use F12, DELETE, F2, etc.; all of them get the Select where I want to go, but as I said earlier, when I select one, the laptop starts just in Win7 from the hard drive.

  My manual tells me to use the Toshiba HWSETUP to access the boot system, but its does not work on Win7 (90% CD-ROM of the tools do not work on/with Win7).

  I downloaded the new drivers Win7 for Bios and other different pieces, some have installed and others have not. More (including the BIOS updated) claim that I am running a not recognized OS so used to install! How the Win7 is an unrecognized OS?

  So my questions are;
  1. How can I access the BIOS to set the boot system to boot from the CD/DVD then the local disk?
  2. is there a fix for this problem? (Looking through the forum, this is not a rare.)
  3. can I never boot/BIOS systems working properly?

  See you soon
  Dave

  Hello

  > 1. How to access the BIOS to set the boot system to boot from the CD/DVD then the local drive?

  Usually, you can access Bios by pressing f2/f12 at startup, but you've already tried... Try the following:

  * Key esc (BIOS Toshiba) method *.
  Press and hold the ESCAPE key.
  Turn on the laptop.
  Press the F1 key when prompted.
  The first page of the BIOS Setup screen appears.
  If you have a utility called Toshiba hardware configuration (site in a windows environment) where you can choose the cd/DVD-ROM boot priority boot option

• Satellite Pro 4600: How to reset or remove the BIOS password

  Hello

  I forgot the password to my Satellite Pro 4600 BIOS.

  How can [1] I reset the password?

  [2] can update BIOS floppy be helpful for bios reset?

  [3] otherwise, you know another method?

  Kind regards
  Aloni.

  Hello

  1.) it of not possible to remove the BIOS password yourself.
  If you forgot the password of the BIOS, then contact Toshiba service partner in your country to remove the password.

  2.) each laptop has a BIOS procedure. You should check the Toshiba FAQ - How can I update the BIOS-
  Please check this Toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=Direct_Support_e u

  But if the BIOS password you can not pass the BIOS. The password of the BIOS must be removed for updating the BIOS.

  3.) see FAQ

• Satellite U300 turns off when the battery has been removed

  Hello

  I'm on the laptop with the battery in place, and the power supply plugged in.
  That's when I take off the battery (always plugged power) who, after 5 seconds the laptop powers off.

  It's not happened before and now it happens ALL the time every time I have to remove the battery.
  I noticed that when the battery is removed, the battery light is always on – if for some reason any cell phone still thinks the battery is connected.

  For me, it looks like an electronic power supply problem.

  But it s just my personal opinion

  I think that the laptop should be checked by an authorized technician.

  Contact the ASP in your country and ask for verification

  If the warranty is valid then an everything should be done for free

  Good bye