Satellite Pro A300 Watch Blue error screen 8086...

Similar Questions

• Satellite Pro A300 crashes with white screen

  I have a Satellite Pro A300, AMD processor, Vista, ATI graphics card.

  The system worked fine for a year, but there are a few months, he started crashing, the screen went white, not blue, whatever it be running, like music, stopped. This can occur after several hours or minutes, or even if he is re-start. All my software is up-to-date, Microsoft and Toshiba. I rebuilt my system from scratch and the symptoms came back.

  At first I thought that this could be a heat problem, but I followed this but I don't think that's it. It crashed seconds after leaving standby mode when it has not had a chance to warm up.

  Anyone have any ideas?

  Simon

  Hey Buddy,

  Theoretically, it might be an overheating problem so the screen became due white built in overheating protection...

  You should try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  In your case, I recommend reading this article:

• Satellite Pro A300-guest 1GT - error message when starting webcam

  I have a Toshiba Satellite Pro A300-guest 1GT. The problem is that the camera does not work. When I run the software, he writes that I have to restart camera or computer. I have Windows 7 and I have serched internet solutions but I find just a discusions with the same problem without solutions.

  Sory for bad English may.

  Hello

  Have you tried reinstalling the driver for the webcam? You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Before installation: remove the driver current webcam and restart your computer. Try a registry cleaner like Ccleaner, then stop and try again. Now, you can install the latest driver for the webcam.

  I hope it works! :)

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• Satellite Pro A300 - windows blue screen / said it's a hardware problem

  He started the summer after I installed Windows 7 and generally, it happened once a month, does not have too much attention to it.

  Now, today it happened 4 times!
  Any help is welcome:

  * This is what it says: *.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 7f
  BCP1: 0000000000000008
  BCP2: 0000000080050033
  BCP3: 00000000000006F8
  BCP4: FFFFF80002ADCDA2
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\110110-27596-01.dmp
  C:\Users\Vladimir\AppData\Local\Temp\WER-53913-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our privacy statement...

  Published by: ADMIN

  Hello

  In general the BSOD is a product of hardware or software problem.
  So it's not easy to say exactly what's wrong.

  Display only the questions;
  Have you tried a fresh install of the OS?
  You update all drivers (especially the graphics card driver)?
  Your BIOS is up to date?
  Have you noticed a higher internal temperature?
  The cooling modules are free of dust?

  Please check first!

• Satellite Pro A300 - blue snow on screen

  After about 20 months trouble free operation, my Satellite Pro A300 has developed an intermittent failure annoyingly screen appears where a scattering of blue pixels, most noticeably on a white background. Generally any form of action (including a proverbial "click") clears the screen until the next time it happens.

  Any idea what's going on? Any help appreciated.

  > Generally any form of action (including a proverbial "click") clears the screen until the next time it happens.
  Means that they are not dead pixels or something like that in this case, it could be a graphics related issue.
  Have you tested this external monitor? Pixels appear on the second screen?
  If so, then this might be a GPU question

  But you can also check if an update of the driver can be useful of course the old driver must be uninstalled and then the new driver update must be installed.

  However, it smells like a hardware problem, so I'm not sure if a driver update that would improve

• Satellite Pro A300: No volume indicator displays on the screen

  Hello

  I have a Satellite Pro A300 with a volume knob. When you change the volume to use, it works (even if this does not work as the starting system which is really annoying, especially when you turn it on every day in a library) However there are usually no witnesses screen to show at what level the volume is at. Once, I saw a display flag which seemed to be apart Toshiba Hot Key Utility but it disappeared again after a reboot.

  It is really impossible to do not be able to see at what level the volume is such that you change. Can someone help me out here? Brands goes for anyone who can help me unravel so volume level start!

  Hi CiRi,

  try to use the "Fn + esc" key to cut your system...
  He will remain silent even for restart the computer...

  If none of the keys have a special feature of "Fn" reinstall the 'value added package' and 'hotkeys' of the toshiba download page.

• Error device basic system for my Satellite Pro A300

  Laptop = Satellite Pro A300
  Platform = Visa PS2

  In my device manager, I have two errors.

  Under "Other devices", mean "Base system device".
  Under the heading hardware ID, one says:

  PCI VEN_1180 & DEV_0592 & SUBSYS_FF1C1179 & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_FF1C1179
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  The second says:
  PCI VEN_1180 & DEV_0843 & SUBSYS_FF1C1179 & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_FF1C1179
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  I believe it has something to do with my card reader.
  Can someone direct me to the right web site, use the drivers?

  Here's a nice page:
  http://www.PCIDatabase.com/

  You can find the details of PCI devices.
  FRI means seller
  DEV: device

  FRI 1180 = Ricoh
  DEV 0592 = Ricoh Memory Stick Controller

  So the case is clear: he controller s card reader.

  I recommend reinstalling the driver.

• Satellite Pro A300-28V - black screen boot failure

  My three days old Satellite Pro A300 began yesterday to hang at startup in Vista. I rebooted twice with good result, but now I see only the home Toshiba screen, then it goes black with a cursor top left. I won't answer on /F12/ F8 F2 or the recovery of the DVD. Indicator LED disc is black, fan-only sound. I have connected not no matter what external monitor ever on this one.

  At the moment so it's Sunday I chose the battery and will try again in an hour or two, otherwise I contact seller tomorrow. Any ideas what's happening? BIOS crash, hard drive (after three days)?
  / disappointed

  Hello

  Does this mean that you can t access the BIOS too?

  If it s, then it seems to be a hardware problem. Therefore, the service provider authorized in your country. They can help you to repair the laptop.

• Satellite L675D: Blue error screen after upgrading to Windows 8

  Hello

  I recently updated my laptop to Windows 8 Toshiba and whenever I use it, after 5-10 minutes, I get a page of the Blue error screen and restart the laptop.

  The problem is really annoying.

  I discovered that if I plug the battery charger, the phone works normally, but I want to solve the problem correctly.

  What should I do?

  I m wondering about your model of laptop. What cell phone do you have exactly?

  Regarding your question:
  I would like to get this right, with the battery it works ok, but when the AC adapter is plugged, it crashes?

  What happens when you connect the front adapter from the laptop would be turned on?

  How have you installed the Windows 8? Move the laptop Win 7 to Win 8 or have you installed Windows 8 clean system?
  Are installed all the drivers Toshiba Windows 8?

  Another idea:
  Go to Windows 8 Device Manager and uninstall the device called compatible ACPI control method battery
  Restart the machine and check how it works.

• Satellite Pro A300 - error - webcam driver open failed

  Hello

  I have the Satellite Pro A300
  The web cam stopped working after upgrading XP in Vista (webcam driver open fail.) Restart camera or computer)

  Any help

  Hello!

  I used the forum search and founded a good display of user Akuma.
  Maybe it's the s solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  Good luck!

  Good bye

• Satellite pro A300-1NT - remember to replace your watch battery

  I bought my Toshiba Satellite Pro A300-1NT 2 years ago. I worked with XP until today. Now I have Windows 7 Professional. I installed it this morning. And I have
  See this caveat. * Consider replacing your battery * I saw this coution on XP.
  What is the problem?

  I use my battery 2 hours without charcing. I see this problem on other forums and everyone says * that is the cause of the Windows 7 "consider replacing your battery". *
  How can I remove this massage? It has not bother me.

  I use my Satellite A300 with dual boot (Windows XP edition family/Win7) and so far I have not seen this message.
  Can you please send a screenshot? I would like to see how this loks like message.

• White screen when exit Mode standby - Satellite Pro A300-15 t

  We have a new laptop Satellite Pro A300-15 t (PSAJ1E00F00FG) with Windows Vista 32. Display of the laptop will not return to the standby mode. He remains in black color. I can see the Green HDD indicator.

  I have to shut down & restart power with force using power switch.

  Is it any Hotkeys to get out of sleep mode? We are pressing on button / stop or keys.

  If someone had similar situations & got some solutions, please help...

  Thanks in advance...

  Hello

  As far as I know that these issues are resolved with BIOS update. Can you please tell us which model of laptop you have exactly and what BIOS version is preinstalled on your laptop?

  I think 2.70 is the latest version of the BIOS.

• Satellite M30: Blue error screen - how to diagnose what it is?

  I have a hardware problem, but I'm not sure of the exact nature. Even if I look like the hard drive or something to communicate with her.
  About two weeks ago, I started to notice performance problems when loading something from the internal hard drive: overall function of the computer (such as the movement of the mouse, mp3 playback) became embarrassed when the hard drive was loading (economy was less of a problem).

  This was NOT the case when loading data or execution of programs from a disk usb external hard. Today, I got a blue screen informing me that this accident was probably due to new hardware or software, followed by a physical memory dump and a severe judgment. I restarted the computer, but had the same problem after the login screen.

  Trying to boot into safe mode does not work either and after some tests it never got to the login screen more - a few seconds after the beginning of boot there was a flash of a screen blue, followed by an immediate halt.
  In any case, I used the recovery dvd - rom product but the problem is still there, which means that I can start now but I get the same blue screen every hour at least (seems to correlate with usage).

  Instead of running off to buy a new hard drive I want to be sure this is the problem (alone), and not a problem of motherboard or what have you.

  Where my question: how I can diagnose what's wrong with my laptop?

  Hello

  Well, if you n t have no experience in hardware or laptops so it of not easy to locate the fault.
  As jmatthews says you can try to check the Blue error screen. If you google around you will find also information about this error massage.

• Satellite Pro A300 - 1 H 2 - Windows does not recognize the HARD drive

  Hello

  I'm a newbie, which has probably asked bin before so if You ' l excuse me, I have a satellite pro A300 - 1 h 2.

  I got the volume of unmountable boot blue screen, then tried to adapt to a new samsung drive. I put in my windows disc it will load all the drivers, then says that there is no hard drive?
  In the bios, it recognizes it?

  Thanks if anyone can help

  Hello

  The problem is that your laptop supports the SATA HDD controller but the system OS does not contain the SATA drivers
  You can assign in the compatible SATA mode BIOS.
  This allows you to install the operating system without installation of the SATA drivers.

  Welcome them