Satellite Pro A60: Cannot install Hotkey utility for display

Similar Questions

• Equium A60 - cannot install hotkey utility

  HELO

  I have an Equium A60-181and I lost the recovery disc.

  I installed Windows and then started with the suggested order:

  silent acoustic CD/dvd V1.00.005
  V6.0.1_BASIC Acrobat Reader
  wireless lan (atheros) 802 utility. 11a / g, of V3.1.1.51
  cardbus controller pci-1620 TI ultramedia pilot V1.0.0.9
  Toshiba configfree V4.60.08
  Console V3.04.00
  controls V3.05.0902
  chipset ATI + display driver V6.14.10.6430
  InterVideo windvd V5.0B11.288 - SRS

  and when he gets here, I'm trying to install: toshiba hotkey utility for display V1.00.03SA
  the installer says:
  "Driver not found!" This configuration will end. "

  Of this, I can't install any of the Toshiba tools: Pc Diagnostics, energy saving and Toshiba Utilities

  What if I'm doing wrong? What could be the missing driver? I installed EVERYTHING that has been proposed in the list and he did repeatedly reformatting.

  Thanks if anyone can help!
  Pablo

  Hello!

  Normally before you start to install the Toshiba Utilities, all drivers must be installed for the hardware so you have already installed the display driver? You may notice yellow exclamation in Device Manager?

  Check it!

  Good bye

• Cannot install Hotkey utilities for display devices

  Win XP Sp2, Toshiba SPA40

  I have a problem with the installation of the Hotkey utilities for display devices driver. I can't run the executable TFnF5.exe, however, after "by clicking on" I can see it in the running processes, but it is not installed and Fn + F5 does not.

  I tried to run the tfnf5.cmd file but there is an error "could not determine the CD-ROM drive letter.

  Thnx for help

  Hi jack,

  If you install the Tools & Utilities CD that you got with your laptop then there must be a special note on the installation procedure. Before you install one of the tools, you must install common Modules. It is a very important for all tools & utilities module.

  First install of the common Modules and then try again with Hotkey Utility for display devices.

  I hope this will help.

  Good luck!

• Satellite Pro L300D: Cannot install because of the common Modules control utility

  Hi guys,.

  I'm new to this forum, but I spent two days looking around.
  I have a sat Pro L300D that I'm downgrading to XP, because many are, and I can't get the touchpad to work or function buttons.

  One problem seems to be to install the utility 'controls', which gives the message "common modules" not installed even though it was the first pilot, I have installed.

  Does anyone have any suggestions?

  OK, here we go.
  Toshiba pilot European page doesn't provide drivers XP ALL, tools or utilities for the Satellite Pro L300D.
  Is this good? I checked the page and there are no. XP applications.

  So I came to the conclusion that the common Modules cannot be installed because this software was not designed for this series of portable and therefore, you receive this error message.
  It is clear!

  So Don t wonder what impossible to install "utility controls" or common modules. These pieces of software are not compatible

• Re: Satellite Pro U200 - cannot install HDD protection Utility?

  Hello

  Know somwonw why I can't install:

  18/08/08
  HDD Protection Utility
  Toshiba Windows Vista 32bits 2.0.0.7 World Wide

  on my PLUA1E Satellite Pro U200-02802QS4 with Vista Business 32-bit?

  Hello

  And why you can install t HDD Protection Utility? You get an error message?

  Please explain your problem exactly because normally Satellite Pro U200 support this utility.

• Satellite Pro A120 - cannot install recovery disc

  Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

  It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

  FYI, this is what happens after installing the hard drive:
  I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
  I insert the product recovery disc, put off and then again when you press F12.
  I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
  I then get RAMDISK image loading... which takes less than 2 minutes.
  I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
  I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

  Any ideas anyone?

  Thank you.

  Hi Lapitup,

  Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

  If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

  In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

• Satellite Pro A40: Cannot read music - looking for an audio controller

  Hello

  I have a satellite pro A40, my DVD rom drive no longer works and I get a message on the search for material for a multimedia audio controller!

  Cannot play music or anything more.

  Can I download these drivers safely?
  Don't want cluttering up computer with random internet downloads.

  If anyone can help me I would be eternally grateful

  Hi satproa40,

  You can download all the drivers for your satellite safely of: [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  the "multimedia audio controller" means that the audio driver,
  If already installed it can help remove this item in Device Manager and let it reinstall System.

  same procedure with the dvd - rom, if this wont work try swapping the drive...

• Satellite Pro U400 - cannot install VAP on Vista 64-bit

  Hello
  Since I bought 4GB of RAM for my Satellite Pro U400 PSU45E, I installed vista Business 64-bit, with all drivers and bios 64 bit found on the toshiba site.
  easy, with the exception of the "value added package 1.1.19", whenever I try to install I get: error "failure of GetProfString."

  I installed every driver and utility for 64-bit, but still the same...
  Everyone has experienced with this?

  Without VAP, I can't use the Toshiba power saver, worst profiles I can't go back because I did a new install and deleted the recovery partition!
  Please, someone help!

  Hello

  VAP contains all the modules necessary and you n t need to install other tools in order to install VAP
  I think that it s a Vista may issue you should do a clean install, then you must update the Vista for the last State.
  After have installed all the patches Vista, try to install VAP and other tools.

  Good bye

• Satellite Pro L500 - cannot install the Realtek LAN driver

  Hi all

  I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop.

  The installation of the driver software program doesn't seem to work properly all the time, tried several times to install with only once a realtek 'repair' option becomes available.
  When I managed to install the driver I got an error "the device couldn't start. After restoring I also had problems with a "controller driver simple communication PCL.
  which seems to have been an Intel MEI according to the SAT, DEV info displayed in the information systems.

  If these problems are linked and how to install the driver required in an automated system if the system does not correctly detects hardware?

  Hello

  I m not owner of the Satellite Pro L500 but have you ever tried to install the latest driver Realtek LAN official site of Toshiba?

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• Satellite Pro A100 - cannot install display driver

  I am updating a Satellite Pro A100.
  I downloaded the update of the display driver but can't install it because it say its longer 88 charicters.

  Anyone has any ideas, tips or suggestions please?
  My goal is to alow the user to be able to play Sims 2 if it is possibe, because I know that some video cards do not support the game (or whatever it is).

  Hello

  I assume that you have downloaded the zip package.
  Rename the package for example in "display driver" and then uncompress the package.
  Then go to the folder where the driver was decompressed and then launch the installation.

  Can you do this?

• Satellite Pro A100 - cannot install audio driver

  Hello

  Hope someone can help, I can't get an audio driver to work, I tried some different drivers now and none seem not to work.

  I tried all the drivers on the Toshiba driver download site with no luck. I always left with a yellow question mark in Device Manager. (Satellite Pro 100) During installation, the window I have instull MICROSOFT BUS DRIVER BEFORE this r audio (Realtek HDA for XP).

  Where can I get this driver (Appreicate if someone could point me in the right direction), or can someone give me another piece of useful advice?

  Appreciate any help

  Thank you.

  I think that this is a known issue.

  Sometimes it s useful to search the Microsoft Knowledge Base. There, I found these interesting documents:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  It is very important to install these patches before you install the driver.

• Satellite Pro M30 - cannot install audio driver

  Hello

  I have a Satellite Pro M30 which usaed work properly but I can install more drivers sound card is on.

  I think it happened because we have reinstalled windows XP Pro with SP2, but may not be some.
  He is installing drivers Sigmatel AVC97 and comes up with the following error.

  Parameter invalid operating system or this installer does not support this operating system

  Any suggestions because it does appear that a driver for the family of SPM30.

  Hello

  Try to install the driver using another medium facility.
  To DO this in the Device Manager.
  Mark the sound card and use the option to update the driver.
  Then, use the advanced option and indicate the location where the driver audio was stored on the HARD drive.

  Please note; You must decompress the audio driver package before installing

• Satellite Pro 4200: cannot install graphics drivers correct Win ME

  Hello

  I have just reinstalled Windows ME on Satellite Pro 4200 machines, but I don't seem to be able to install the correct graphics/display drivers. Can anyone help

  Thank you
  Steve

  Post edited by: skc1959

  Hello

  What graphics card was installed in this oldie?

  I don t think that Toshiba provides Win ME drivers for this device, and so you should Google in the internet for the graphics driver.

  Good luck

• Satellite Pro L20 - cannot install Windows XP

  Hello!

  I discovered this great forum and wanted to try my luck with the following problem. Any help at all is greatly appreciated!

  I do a clean install of Windows XP on my Toshiba Satellite Pro LP20. I don't have the original Windows XP cd that came with the computer, but have you tried many (legitimate) copies of Windows XP with the same result:

  The first step of the installation works fine, IE. files are copied from the CD to the hard drive and the computer restarts once the process is complete. However, during the restart to calculate, is wrong on the second phase of the facility (where continues the installation of windows XP graphic), but goes back to the DOS file copy process. This means, even if the files have been successfully copied from the CD to the hard drive, the computer does not recognize that there is a current operating system.

  The problem is not in the boot order, like the HARD drive is my number 1 option, and tried without the installation Cd in the drive. In this case the computer says only: "no operating system found".

  Where is the problem? Is this a problem of motherboard BIOS, or do you recon that the HARD disk is somehow broken? I know that the problem is not in the XP installation CD, because it works fine on other computers.

  Thank you!

  It's not easy to say what is the problem and what are the causes of the problem.
  You can try another drive to install Microsoft?

  In my opinion, it could be a problem with the HARD drive. Then you should check this with the Drive Fitness Test.
  Google for this test, it of quite easy to use.