Satellite Pro A60 - is overheating and shuts

Hello

I have a problem with my A60. I start and everything goes OK. I put in a temporary monitoring software because it works for awhile and then just stop. What I see happening now, is that it will heat up to 65 then the fan comes on and at 55 it stops. This can happen a few times, and then he forgets turn on the fan. After that he climbs slowly until she happens to 85 when he cuts. I bought a stand 3 fans and now it stays on as long as when it goes on the fan circuit anointed, gets it to 77-80 and stays on. The problem is if I USE then overheating and stop again.

What control actually (and fails to start) the fan cut in the process. This part of the function of the BIOS? Updated BIOS ver 1.7 to ver 1.9 will make a difference? I'm afraid that this update will not end before overhearting and I'll be left with an unusable machine.

Any ideas?

Thank you.

>.. .a finds a way to fix it properly.
This type of hardware components are not fixed but replaced so if you think that the cooling fan is defective exchange it.

One more thing, the vacuum cleaner is OK, but you can't wait to clean up your laptop to look like new. I disassembled my Satellite M70 and was surprised how much dust was inside.
Just after the withdrawal of the ventilation openings, I was able to clean it properly.

Tags: Toshiba

Similar Questions

  • During BIOS update by Satellite Pro A60 went down and did not start

    Hi all

    I have a Satellite Pro A60 and I've updated the bios. To halfway the update, my laptop came down and started Hasna´t since. It only give a couple of beeps (trying to tell me the bios is damaged, I guess) and turns off again.

    Tried to start with (~) key pressed (a tip I received from a friend), but without success.

    I live in a country where there is no available Toshiba dealer and I rather not ship the laptop for repair.

    Does anyone know how to fix this? Any help would be greatly appreciated.

    Thank you

    This doesn't sound good.
    If during the POST, the BIOS detects a problem, it will normally display an error message visual on the monitor explaining what the problem is. However, if a problem is detected before it initializes BIOS video card or a video card is not present or not detected then BIOS will play through the Speaker beeps to let you know there is a problem.
    Depending on the type of BIOS you have the BIOS can play beeps in a specific pattern to indicate what the problem is, or emits the signal even a few times indicating the problem.

    In your case, it is possible to s you used a bad BIOS or bad BIOS procedure. Both can damage the motherboard.
    To avoid such damage and mistakes, Toshiba published FAQ document.
    How to upgrade the BIOS on most of the units!

    That you should read before making updates to the BIOS!
    Unfortunately, I n t think that you can fix yourself. I think you should ask to help ASP.

  • Satellite L350D-213 repeated overheating and shuts down

    Hello

    Recently had problems with my Toshiba laptop Satellite L350D-213 of the he repeated overheating and if off, any suggestions as to prevent overheating would be greatly appreciated

    Hello

    There is a lot of advice about the overheating problem.
    First the laptop stops automatically to avoid that the pieces of equipment from damage, the higher temperature may affect parts and this is the reason why the laptop stops.

    Why the temperature is too high?
    Well, maybe the cooling modules does not t run with the best performance because of the dust and debris inside the modules?
    It is mainly the reason why fans do not twist and cannot cool the laptop.

    I recommend to check this and remove dust and debris from cooling vents using a jet of compressed air.

    I do from time to time, and it helps to clean the fans

  • Satellite Pro A60 and Port Replicator

    I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

    Hello

    I understand your problem in this way.

    You have connected the printer via Port Replicator ports for the A60 SatPro.

    Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

    Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

    When you want to validate this information, it would be easier to help you!

    Bob

  • ATI error and no windows - Satellite Pro A60

    Hello

    When I start my computer, I get a blue error screen c0000415
    A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

    "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

    Oh the fun.

    "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

    I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

    Any suggestions much appreciated - thanks in advance...

    [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

    Hello

    As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
    The installation of SP2 should help.

    This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

    You should try to get an original CD of Windows XP with or without SP2.
    The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

    Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

  • Satellite Pro A60-832: sometimes the OS starts without sound and modem

    Hello

    I have a problem with my Satellite Pro A60-832. Everything works perfectly, but sometimes my system starts without sound. When this happends, modem also does not work. After reboot, everything works well again. I integrate Windows XP Pro SP2, but the same thing was happening with the original Windows XP Pro SP1 provided in the Toshiba Recovery CD.
    Any ideas?

    Sorry for my bad English.

    As mentioned, a high temperature might be responsible for these drop-outs, but I n t think that there is a problem in your case.
    I think that the temperature cannot be very high immediately after the start of the laptop.

    In case I would recommend comparing the BIOS installed on the unit you with available on the Toshiba page BIOS.
    If there is a new version of the BIOS so you can try to update.
    But be sure you use the good BIOS and the proper procedure.

  • Satellite Pro A60: On startup graphics card problem

    Just got a Satellite Pro A60.
    Whenever it starts it stops and then restarts. It then works perfectly OK, even if restart you. But then if you start it once it is shut down for a few hours it crashes at startup upward again?
    Windows error report accusing the graphics driver ATI Radeon 7000 (see report below), but I've updated the graphics driver and still get the same problem.
    CAN ANYONE HELP?

    This is the error report:
    Error caused by ATI Graphics Driver: no specific solution found
    Description of the problem
    An unknown error has occurred in ATI Graphics Driver, created by ATI® Technologies, Inc.
    Resolution of problems
    ATI® Technologies, Inc. is currently not aware of a specific solution for the problem you reported. Here is a list of recommendations to take that may help prevent the problem does not happen.
    Download and install an ATI Graphics Driver Update from one of the following locations:
    o Windows Update
    o ATI® Technologies, Inc..
    If an updated driver is not available, check with your computer manufacturer.
    If you are running the latest version of the ATI graphic driver, please contact ATI Technologies, Inc.® for your support options.

    More information
    If this problem persists with the latest updates to ATI Graphics Driver, we strongly recommend that you obtain assistance and troubleshooting directly from ATI® Technologies, Inc. information.
    If you are not familiar with ATI Graphics Driver and you are questioning how the program was installed on your computer, it is possible that the program was installed with another program. If you don't know why ATI Graphics Driver is running, many programs configure themselves automatically starts whenever you turn on your computer.

    Hi Barry,.

    I'd be inclined to return your laptop to an authorized Service Agent Toshiba. The OEM software should not require all the updated drivers at this early stage of his life, and the unit will be well within its warranty period.

    The closer your repairman details can be found on the Toshiba site.

    HTH

  • Satellite Pro A60 cuts off after 3 minutes

    Hello

    work in IT Support generates many puzzles, but I currently have a Satellite Pro A60 which cuts off after 3 minutes.
    I have deleted the main CPU fan and have noticed that the VGA Chip Set fan fails.

    It is not at all which makes me think that it is completely broken or there is a problem with the motherboard.
    Who is more likely and if not card mother, can I buy a VGA heatsink thermal elemnet / separate fan and if so what is the part number and ball park cost?

    Matthew

    Hello

    As you already suggested this strange faucet portable bottom may be related to high temperature and to overheating.
    You are right; the malfunction of the fan could be a reason to close automatically and sometimes down.

    > can I buy a VGA heatsink thermal elemnet / separate fan

    Usually, the cooling modules are pieces separately and can be replaced.
    But notebooks disassemble and replacement of cooling modules is not easy and a little more difficult for someone who has no experience and never changed something like that. It s just too risky, because this person may damage the motherboard very easily.

    So, it's probably best to contact the technician of specifications for these s replacements!
    The ASP can command the support of the head of Toshiba warehouse cooling modules and compatible and could replace it.

    Best wishes & congratulations buddy ;)

  • Satellite Pro A60-138 PSA65E - cannot boot from c WEIRD

    Hello
    I bought this laptop on ebay, with no cd or manual.

    Satellite Pro A60 GR
    MODEL PSA65E-01K032GR NUMBER

    Hard drive is formatted.
    I tried to install xp, because I start the laptop it just says: "control system.
    Then press [F1]. "If I press F1, it tries to read the cd and gives up after a few seconds.

    If there is no cd in the cd drive there simply nothing.
    I tried to start the bios menu but everything works,(F12,F8,del) key.

    Is there something I can do?
    installing drivers or anything like that?

    Hello

    In order to access the BIOS please press F2, then ESC.
    This should load the BIOS and you can change the boot order there.

    In addition, you can press F12 at the beginning.
    This will allow the menu on the screen where you can choose the STRANGE as a source of start-up.

    But are you able to boot from another CD?
    The CD/DVD drive is unable to read the disc, and therefore the boot process fails

    You could also burn this disc Win XP on another CD and could use the new disk to the start I did with my old laptop because the CD/DVD drive didn't read the old CD.

  • Memory should what upgrade I buy for my Satellite Pro A60?

    Hi, I have a Satellite Pro A60 PSA65E, who currently has 192 MB of RAM and 2.8 GHz Celeron processor.

    My problem came when I tried to install Adobe Creative Suite 2 on it, but it would not allow me to do so because he needed 384 MB of RAM to run it. I was wondering if someone could tell me what RAM upgrade is compatible with my machine and if it inserted in another port or if I have to get out the old and replace?

    Thank you
    Donald

    Hello

    your laptop is 256 MB internal memory, I'm not sure why it shows only 192 MB. This internal memory can be replaced only by a technician. But you also have a currently unused memory slot, in which you can place a maximum of 1024 MB of RAM.

    Here are the modules from Toshiba lets you:
    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Good bye

  • Satellite Pro A60: Screen does not

    I used my Satellite Pro A60 yesterday and everything was fine, I tried to use it today and the screen lights it is just white... Please can someone help I am lost without her, the blue light comes on, but nothing on the screen please help.

    [Edited by: admin on 3 July 05 13:22]

    Hello

    you see the Toshiba logo red when it starts or a screen empty?
    Toshiba logo: so you have a software failure, and you should backup your data and do a restore
    White screen: while there must be a problem with your hardware! Contact a Service partner and he will repair under warranty!

    Good bye

  • Satellite Pro A60 USB TV tuner

    Does anyone know of a USB TV Tuner (PAL) who will work with a laptop Toshiba Satellite Pro A60 with integrated ATI graphics card?
    I tried 2 so far, Pinnacle PCTV and Compro Videomate Action, neither worked.
    The problem seems to be with the graphics processor ATI IGP

    Hello

    have you checked www.hauppauge.com?

    They're also good tuners TV, but please ask a Tech support guy. If there are problems with the ATI 7000 IGP chipset!

    Good bye

  • Toshiba Satellite Pro A60 Celeron 2.8 GHz, 256 MB of volume?

    Hello

    I recently bought a Toshiba Satellite Pro A60 and I am pleased with the point, but despite the turn the music full volume and even the windows sounds are very quiet? To me it seems not be significantly quieter than other notebook that I used. This is how the element should work, or would that be a possible problem?

    Thanks for any help or advice you can give.

    Hello

    Did you scan you check all parameters in audio sounds and Audio Devices Properties?

  • Question about the use of the Satellite Pro A60 fan

    Hello

    I intend to get a Satellite Pro A60 and I was wondering how much the fan turns on.

    Could someone comment if the fan turns on when the machine is totally inactive, and how he lights up when the machine is used for word processing and surfing the web?

    For example, when using normally does the fan turn on 1/10th of the time, or 1/2 time etc.?

    Thanks in advance,
    Pete.

    Hello

    Sorry I can't give you specific information about the cooling fan. A60 is known to me. It's a very nice laptop. Cooling vent is in reverse I am a pretty that there is no background noise.

    If you make the decision to buy it, look at what the capacity of the HARD drive is too high and that the DVD-ROM can burn a lot of different formats (DVD Super Multi drive).

    Have lots of fun with it.

  • Satellite Pro A60 Wireless connection problem

    Hello

    I have a Satellite Pro A60 which was connected to our main office using a Linksys Home Wireless - G USB adapt to I can share files and also connect to our connection broadband. The main office is connected directly to a G from Linksys home wireless gateway. It worked fine then for no reason (no settings have been changed or installed software) the laptop does not connect to the desktop or the internet. The software Linksys says that it is connected to the access point, but the internet cannot be found. Even if he says that it is connected I can't get to the desktop.

    I tried to set up a dial-up connection independent for updating drivers etc, but after the normal dial tones, he says that it cannot connect to the remote computer.

    We tried everything that we think would be grateful for any ideas. Please speak slowly and distinctly also even if I know a little technical jargon computers is a language that I'm not still commonly!

    Thank you very much

    Hello

    It's really not easy to say what can be the problem. In my opinion, you must remove all the settings and adapter WLAN Device Manager. Restart the unit, reinstall the wireless card and make a WLAN configuration again.

    In my opinion, it is very important to know if the WIFI network of the device works correctly, and if you are able to share files between the laptop and our main office. If it works properly again check the settings on our front door.

    One is the problem with Notepad or another device. If someone of your friends has a WIFI at home, you can try to check the laptop WIFI functionality. On this way, you can be sure that if the problem is caused by your Satellite Pro.

    If you find a solution please let me know what the problem is.

    Good luck!

Maybe you are looking for

  • How to create a recovery media from HARD drive recovery image?

    When I tried to recover a fresh HARD disk recovery Windows, my little son stopped the proccedure by accident. When I tried to reboot I get the message bootmgr is missing. I have a copy of the HARD drive recovery file but din not creating a restore DV

  • Satellite L505-13W and BIOS error

    Hello guys,. I need help from you people... I have a bios problem down in my laptop. The blue screen message is quotted below, Your BIOS is not fully compatible with ACPI, please update your BIOS. STOP: 0X000000A5 (0 X 00001000, 0X00000000, 0XBE298C9

  • Agilent 34952 API has module

    HelloI use Agilent 34952 module 34980A multifunctional SW/measurement unit. I have read the information on "the use of third-party products" and applied. In the part of session of driver, there are two files for 34980A and 34952 a.. I created the dri

  • Why do I get an error "failure of the Web deployment task"?

    Hello microsoft,. I found an error while I'm trying to publish a Web site. ». Web deployment job failed (the 'ASPNET' account doesn't seem to be valid. The account was obtained thanks to its location: 'AspNetWorkerProcessIdentityName'.)  On behalf of

  • Not enough resources to meet the level of failover HA

    HelloI don't know if anyone can point me in the right direction, but I'm having a problem with the configuration of the HA on a cluster for the moment when he returned with the warning following 'insufficient resources to meet the level of failover H