Satellite Pro C650-139 - faulty USB ports

Similar Questions

• Dynadock U10 goes into sleep to help with Satellite Pro C650-139

  We have several Toshiba in my work, we have 2 Toshiba Satellite Pro C650-139 with Toshiba Dynadock U10 (PA3575E-1PRP), and these moorings seem to go to sleep every now and then, sometimes, the screen freezes on the screen connected to the U10. Is there a solution? or just pass these stars?

  Hello

  Have you noticed that using the Dynadock as part of another computer/laptop?
  I asked this because it might be possible that your affected laptop connection settings between the laptop and Dynadock.

  To my knowledge, you can set the Dynadock standby mode but in this case the Dynadock would unplug the computer.
  In Dynadock options (in the task bar, click the Dynadock icon), you can find the Eject option and sleep. This disconnects the Dynadock and set it in standby mode.

  I think you should check the Dynadock with different USB ports.
  Deactivate the energy saving for the USB ports in your Win 7 power management settings.

  In addition, you can update the graphic driver for Dyandock.
  As far as I know, you can find the latest version of the driver here:
  http://www.DisplayLink.com/support/downloads.php

• Installation of SP2 on my Satellite Pro L10 causes the USB ports fail

  I just installed XP SP2 on my L10 and USB ports no longer work.
  There is no error in the Device Manager, the device in the USB ports are not recognized.

  I removed SP2 and USB ports are functioning again.
  Model No.: PSL15E-00H018EN

  Any suggesttions? Thanks in advance.

  You simply remove the USB controller from Device Manager.
  After that the new charging USB ports should work again!

  Also see this MS article:
  http://support.Microsoft.com/kb/892050/en-us/

• External USB hub limit for Satellite Pro C650

  Is there a limit to how much you can connect via the Satellite Pro C650 of external usb ports?

  Provides four ports hub I, ports seem to work individually and all devices operate normally when plugged directly into the top of the Tower, but when all devices are plugged into the hub and combined high tower, there are future errors.

  Thank you
  Karyn

  Well, I think that this should not be a problem if the unique USB hubs provide clean power.
  The fact is that the only USB port provides common 500mA and if several devices would share the power of a USB port then it might be possible that the 500mA available would not be sufficient for all USB devices.

• USB ports not working not not on Satellite Pro C650 - 18 d

  Hello
  I have a Satellite Pro C650 - 18 d on which USB ports are dead.
  So far, I've updated the chipset and BIOS - but they stay dead. It doesn't seem to be a power either. I have a USB key with LED and it does not light.

  Any ideas? It's under warranty and so unable to try something wild!

  Thanks for any help
  Jim

  Hi Jim

  I recommend you to reinstall the OS and test the feature with the factory settings. Please, test it with several different USB devices. If none of them works, you must contact the Toshiba service provider in your country and leave check s portable.

  Do you know how to find the addresses and phone numbers?

• Satellite Pro C650 - USB ports now DEAD

  Over the past 48 hours have really struggled to get my USB ports work,
  Toshiba SATELLITE PRO C650 lappy running W7... At only 2 usb ports.

  A couple of days, I bought a new stick of memory... 16 GB SanDisk Cruzer Blade... He stuck in lappy and anything that happened outside my mouse attached wireless stopped working.
  Since then, the ports were completely dead. (stick now appears on anotherPC)
  That's what I did so far, after a search web solutions thro...

  Device Manager display ports everything is OK with no exclamations...
  When I insert any USB device... no sound confirmation of PC and Dev Mgr flinch...
  Tried to uninstall port/hubs and leaving W7 re-install them using... Still dead...
  Trying to remove battery and power sector during the centuries, then re start off the power... Still dead...

  I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs.
  I really want to be sure ive tried everything before you do this.

  Could I have really damaged the MB. ??
  I now nowhere so fast if theres anyone out there has any suggestions please shout...

  > I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs

  Even if it s really painful to get everything installed it again, I would recommend to recover the laptop using the Toshiba recovery disc or HARD drive recovery.

  > Could I have really damaged the MB. ??
  Well, it's hard to say before trying the recovery procedure.
  If the USB ports are not working after using the recovery disk (or HDD recovery), then of course: the mobo may be affected, therefore, in my view, the laptop must be set to the factory settings.

• Satellite Pro C650: USB flash memory starts to load then crashes

  Hello

  I have my new Satellite Pro C650 laptop for about 2 weeks and there is already a problem with it.
  When I insert a flash drive into a usb drive, it starts to load, but as soon as it loads it crashes as if I disconnected, and then start loading again again and again until I have unplug it really.

  The flash disk works fine on other computers, so it shouldn't be the problem.
  Device Manager indicates that my drivers are ok.
  Is not only the USB flash drive mouse works fine when I plug in usb...

  Does anyone have an idea how to solve this problem?
  If so, thanks in advance

  Hello

  Strange in your case I recommend you test another USB key into the Satellite laptop. I know you have tested this stick in other laptops, but it would be interesting to know how the other USB key would be instrumented C650.

  I recommend in addition updated the operating system Windows and the BIOS to the latest status.
  In addition, you should go to Device Manager and delete the list of devices USB controllers. Then restart the device and wait for windows has installed again all the USB controllers.

• Satellite Pro C650 - does not start

  Hey all,.

  My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,

  However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.

  The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
  I was hoping you could help me!

  Thanks :)

  I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.

  For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

• Satellite Pro C650 - arrow, slash and z keys do not work

  Can anyone help - my slash keys, arrow keys, z and question marks have stopped working.
  I saw several other posts on different forums for exactly the same combination of keys.

  I have a Satellite Pro C650.

  Looks like a malfunction of the keyboard.
  You can use the external USB keyboard properly?
  If you haven't noticed the same problems with the external keyboard, then I would recommend replacement of the internal keyboard.

• Satellite Pro C650, boots OK, after Windows starts to the top of the screen becomes white

  Hello

  I have a Satellite Pro C650.
  It starts very well.
  I see Windows commissioning - after start-up - the screen goes completely white.

  Has anyone seen this?

  Am geussing there could be a loose view link - but I have the screen displays the start-up and initial windows startup sequence.

  Kind regards
  eeiddne

  Hello

  I put t think that your display is faulty.
  What happens if you access the BIOS at the beginning?
  To access the BIOS F2 press and turn the device on/off.

  Access the BIOS and let it run for a few minutes and check if the display starts at White.

  In addition its recommended to connect an external monitor and generate the display 2. If the 2nd screen is not OK, then the graphics chip could be the troublemaker.

• Satellite Pro S500-139 - FN + F9 key does not have to turn off the touchpad

  Hello

  I use a Satellite Pro S500-139 and am having problems with my F9 key. When I tap my palm touches the mouse and send the cursor somewhere else on the page. I reinstalled the ALPS pointing device and now have access to the Advanced setting that I was not able to get.

  Although I can set the sensitivity etc. I would really be able to use the shortcut to disable the mouse momentarily while typing. My keyboard shows that, if I press fn and F9 the i should be able to disable the mouse but the function does not work. F9 all other functions seem to work.

  Do you know if there is a solution to this?

  I am running windows 7 pro 32-bit service pack 1.

  What you can try is to reinstall extra package from Toshiba.

• Satellite Pro C650 - upgrade Windows 7 32 bit to 64 bit

  Ive bought a Satellite Pro C650 with Pentium duo core and 8 GB ram. I did the initial start upward according to the instructions, but the PC work as 32-bit and I do not have access to the total ram.
  Obviously, I need to upgrade to a 64-bit system to take advantage of all the ram. Ive done the checks of system and it indicates that the PC is capable of running the 64-bit. The more I read more confused I get.

  Should I upgrade from Home Premium to something else?
  Do I lose all settings, etc. on the PC?
  In truth, Ive got no idea what to do from here.

  Hi kymbo

  The first welcome on this forum and I am glad you are here and you want to ask what may be the best solution for you before you begin the search for a solution on your own.

  At has first of all tell us please what C650 you exactly (C650-xxx).

• Satellite Pro C650: Need drivers Win XP

  Hello

  I am looking for a drivers audio xp for toshiba satellite pro c650-10J computer laptop.
  I found on the toshiba support site only Conexant drivers that are not good.

  Someone knows, where can I find different drivers?

  Hello

  Conexant audio driver on the European driver of Toshiba page is good.
  You must choose this driver v 3.80.0.0.

  But note; It is very important that you should install SP3 BEFORE install you the audio driver.

  There are some other threads in this forum about it, and the driver is ok.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite Pro C650: Win 7 can't format again SSD

  I coach a use a Toshiba laptop satellite pro C650 with win 7 preinstalled, I tried to insert a faster SSD hard drive and here is my problem:
  The preinstalled win7 can not format the hard drive and reinstall WIN7, I need to the cd, so what I do?

  Hello

  Have you tried to use the recovery disk to reinstall the image of Toshiba?
  The pre-installed Toshiba tool called Toshiba recovery disc Creator allows you to create the recovery disk.
  The recovery disk contains the package of the image that contains the Win 7 OS, drivers Toshiba and 3rd party software and tools.