Satellite Pro C650, boots OK, after Windows starts to the top of the screen becomes white
I have a Satellite Pro C650.
It starts very well.
I see Windows commissioning - after start-up - the screen goes completely white.
Has anyone seen this?
Am geussing there could be a loose view link - but I have the screen displays the start-up and initial windows startup sequence.
I put t think that your display is faulty.
What happens if you access the BIOS at the beginning?
To access the BIOS F2 press and turn the device on/off.
Access the BIOS and let it run for a few minutes and check if the display starts at White.
In addition its recommended to connect an external monitor and generate the display 2. If the 2nd screen is not OK, then the graphics chip could be the troublemaker.
original title: when you watch a movie on netflix after 10 minutes, the screen goes white, I can hear the movie but not see it. How to stop going empty?
When you watch a movie on netflix after that 10 minutes, the screen becomes white, I can hear the movie but not see it. How to stop going empty?
If I move it, it comes back. I went to personalize and click never. I know you if it's ok now!
When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?
Let us try these methods and check if that helps.
You can try the last good known Configuration and check if that helps.
Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration
You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.
Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Let us know if you need assistance with any Windows problem. We will be happy to help you.
My HP Pavilion DV9500 laptop started making a few months ago:
The computer and the programs sometimes simply freeze, sometimes the screen becomes a light pink with diagonal lines dotted, and sometimes the laptop itself restarts without warning. The computer is about 3 years old now and have not had any problems before this. I tried to do a clean install of the recovery feature that I don't have a Vista disc to reinstall from, and he always does this. Sometimes the computer will be fine for a few hours and sometimes just after the start it will freeze. A couple of times too, as it starts, Windows will not start and it will say "Not found operating system".
It sounds like imminent hardware failure/issues. Since you did a clean installation of recovery
pretty much excludes most of the causes of software if it could be driver related and there are other
possible causes remotely. Video/display and its drivers are suspected leader and mother.
Board and power supply.
Keep good backups and check with a real store of the computer (not the leeks and glances at a BestBuy, etc.)
BigBox stores) or the manufacturer of your system Support.
It's my generic convenience store and eventually it can help you determine the cause but I strongly
Look in the Event Viewer to see if something is reported on those.
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.
or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.
This tells you how to access the System Recovery Options and/or a Vista DVD
You can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
How to install a device driver in Vista Device Manager
How to disable automatic driver Installation in Windows Vista - drivers
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
Troubleshooting, STOP error blue screen Vista
Understanding and decoding BSOD (blue screen of death) Messages
Windows - troubleshooting blue screen errors
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
This tells you how to access the System Recovery Options and/or a Vista DVD
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
I can't get Windows Media Player to become full screen. The screen turns white, but there still audio. I just upgraded to version 11, but the problem is still there. Any advice?
Yes, the video driver is something else. If you are not familiar with the update of your system... it can be better if you ask someone more experienced to help you.
The following article provides information on how to identify your video card, how to find a new driver and how to install it:
How to upgrade drivers for a video card
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)
I'm seriously going crazy right about now... my problem is the following:
I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.
About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.
The thing I've tried:
Ran Spybot: Search and Destroy
A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?
Thanks in advance!
I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.
Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.
If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.
I have a professional Windows XP Tablet from Lenovo X 200 ongoing execution machine. This problem does not occur * too * often, but enough to be annoying.
After 15 minutes of inactiviy, windows is the standard screen saver routine by locking the desktop computer. Meanwhile, the white box that says click on Ctrl-alt-del to enter your password is visible. There is also the virtual keyboard on the screen.
From time to time, I go back to my computer to see that white box unlock is missing! There is no way for me to go back to windows! I have literally remove the battery and restart. During this time, I lost all my unsaved data... not to mention that I keep not the most graceful way.
This happened to someone? What in the world could be the cause?
Thanks for the comments.
1. you have value to request password on Resume on the computer?
I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.
For more information please visit the link below.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
If you don't want to try windows to ask for the password after the recovery step turn it off below.
(a) make a right-click on an empty area on the desktop
(b) select Properties in the context menu that will open
(c) click the screensaver tab
(d) uncheck the box that says on Resume, password protect to disable.
(e) click OK
If you don't want the window Ctrl + Alt + Del on the logon screen, try the steps below.
(a) click Start, click run, type Control Userpasswords2, and then press ENTER.
Note The following dialog box may appear:
You must be a member of the Administrators group on this computer to open user accounts. You are logged in as username, and this account is not a member of the Administrators group.
In this condition, you must type the user name and password when you are prompted with the dialog box to type the user name and password of the administrator of the computer.
(b) click the Advanced tab.
(c) in the Secure logon section, click to clear the checkbox user must press Ctrl + Alt + Delete if you want to disable the CTRL + ALT + DELETE sequence
How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
My MacBook pro retina just turned off. whenever I try to turn it back on, a black screen with a folder symbol and a question mark starts blinking. Can anyone help please?
The? a mark indicating that it cannot find your hard drive. Sounds like your hard drive is dying/dead. You have a recent backup?
I have a Toshiba Satellite Pro C650 11Z model under Windows 7 Home Premium. I'm not very savvy computer. I can use my computer to perform tasks and use the software, but I m not very got when it comes to computer and tinkering under the hood, somehow.
I was using the laptop yesterday evening to watch a You Tube playlist and was downloading a PDF 29MB file in the background. I have done this kind of thing before and never encountered any problems.
When the download finished (I use Google Chrome) I clicked the button at the bottom left of the screen to open the download. You Tube then frozen.
I could see the little green circle spinning around like loading upward download, but nothing was happening. Then Google Chrome no longer according to the bar at the top of the window.
I tried CTRL + ALT + DEL, but the workload Manager wouldn t. The only thing I could do was turn off the laptop and running again, as it had frozen him completely. When I turned on it again, I had the Windows error recovery menu as shown in the following image.
The problem is that none of these options does nothing. If you choose the recommended option (for example Startup Repair) it comes up with the gray bar saying Windows loads the files and then will just a black screen. By selecting Start Windows normally gets you to the swirling colorful circles that make up the logo Windows and he said: start Windows but still once, it does nothing but just stick to that.
A friend told me that a BIOS reset * may help. However, I don't know how to get the BIOS on the laptop. He called Insyde H20 installed and I don't see the option to access the BIOS.
Someone at - it ideas as to what could have wrong and how can I fix? I don't have a recovery disc as my laptop was bought for me by a charity. The warranty has expired now so that I can contact t their support line.
To be honest I don't think BIOS has nothing to do with it. Start your laptop and press F8 several times to display the advanced startup options. You will find the option to start the operating system in safe mode.
If please test and let us know what happen when you try to do.
My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,
However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.
The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
I was hoping you could help me!
I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.
For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
I searched high and low for the answer to this question and its driving me crazy. I really hope you guys can help out me!
I have a Toshiba Satellite Pro C650 01301J laptop running Windows 7 Professional 32 bit. I try and listen to the music through spotify or simply using my music in Windows Media Player library.
However after a while the sound cuts. It is not muted in the mixer and the song continues to play as if nothing has changed, except that I can't hear anything.
This problem is corrected when I disable and re-enable or increase the volume upwards or downwards using the fn keys.
When I first start the music it take 5 minutes or more before that happens, but once it starts it stops every 10 seconds or more. It becomes extremely annoying and I am convinced that there must be a solution.
My audio driver is Conexant SmartAudio HD version 220.127.116.11 CX20671. I tried to remove it and put it back, download an updated old and updated driver. He told me that it's the most recent driver, but its still not solved the problem.
This happened to someone else? Is there another driver I could try, or maybe a program that is the cause?
I would appreciate your help in what its driving me crazy not being able to listen to any form of music without it cutting up every 10 seconds...
Have you noticed this strange question on the first day of use, or later?
It is not easy to say what the problem is, but I think that it is somehow a software related issue.
You know what, try reinstalling additional Toshiba package and test it again. I put t know if this will fix it but it is worth trying.
Please post comments.
Title: power original economy
I wish my screensaver runs while I'm not using my computer, but after a few minutes, the screen becomes black until I move my mouse again. How can I stop this?
Thanks, it was just a matter of adjustment of the power to the right thing!
I have my new Satellite Pro C650 laptop for about 2 weeks and there is already a problem with it.
When I insert a flash drive into a usb drive, it starts to load, but as soon as it loads it crashes as if I disconnected, and then start loading again again and again until I have unplug it really.
The flash disk works fine on other computers, so it shouldn't be the problem.
Device Manager indicates that my drivers are ok.
Is not only the USB flash drive mouse works fine when I plug in usb...
Does anyone have an idea how to solve this problem?
If so, thanks in advance
Strange in your case I recommend you test another USB key into the Satellite laptop. I know you have tested this stick in other laptops, but it would be interesting to know how the other USB key would be instrumented C650.
I recommend in addition updated the operating system Windows and the BIOS to the latest status.
In addition, you should go to Device Manager and delete the list of devices USB controllers. Then restart the device and wait for windows has installed again all the USB controllers.
Ive bought a Satellite Pro C650 with Pentium duo core and 8 GB ram. I did the initial start upward according to the instructions, but the PC work as 32-bit and I do not have access to the total ram.
Obviously, I need to upgrade to a 64-bit system to take advantage of all the ram. Ive done the checks of system and it indicates that the PC is capable of running the 64-bit. The more I read more confused I get.
Should I upgrade from Home Premium to something else?
Do I lose all settings, etc. on the PC?
In truth, Ive got no idea what to do from here.
The first welcome on this forum and I am glad you are here and you want to ask what may be the best solution for you before you begin the search for a solution on your own.
At has first of all tell us please what C650 you exactly (C650-xxx).
can someone help me please?
I bought my Toshiba Satellite Pro C650.
She charged for 16 hours, set up and after restarting it exploded and now he turns not free at all.
Remove the dough and disconnect the adapter.
Wait a few hours and then reconnected the two pieces to the laptop.
Then try to turn on the unit.
If this will not help you, then I recommend asking a technician for laptop for a control. If there is no sign of life, a serious hardware problem may be possible.
Maybe you are looking for
How to fix error unexpected error 999998; the end-user uses ArcGIS
Hello I have the HP Photosmart C7200 all-in-One series. This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem. I have a Verizon FiOS (Actiontec) router. I am trying to connect to it wirel
I subscribed for a monthly subscription to Photoshop CC in August so when I lost my job I tried to cancel the plan. But it came as if I had never seen a plan saying that I had a free plan for creative cloud. THEN I see a charge from Adobe on my PayPa
How to fix error 1316 installing upgrade to Adobe Acrobat Pro DC
I have a single file (DevMachine - 000003.vmdk to be exact) a computer virtual disk set that has an old date on it for 12 hours before the other drives. That date seems to be the last time a snapshot has occurred. Now I can start the virtual machin