Satellite Pro L20: I have problems of havi upgrading RAM

Similar Questions

• Satellite Pro A120 (PSAC0E) does not start after upgrading RAM

  Hello

  I hope someone can help me here, I recently bought a Satellite Pro A120 (PSAC0E) and decided to upgrade the RAM. I bought a stick of 512 MB of curries with the following specifications: DDR PC2700 200-pin 333 Mhz SODIMM (64 x 64).

  However, the first problem I encountered was an alignment problem. A little effort and handling solved this, but after you insert the RAM into the available slot, the computer laptop wouldn't boot, and instead, I had the flashing sequence on the LED from 2,3,3.

  I was told it might be a problem matching, then tried to remove the original RAM and booting with just the new stick, still the same error. I tried it in the slots and still no joy. It starts very well with the original 256 MB of RAM, but refuses to take the new RAM.

  Are there any known issues? Can anyone suggest something that I can do wrong? I followed the usual steps of upgrade to remove all power cables and the battery before the upgrade, but still no joy.

  Hoping that someone is able to help!

  Hi James

  You simply have bad memory modules and is not a compatible uses.

  > the first problem I encountered was an alignment problem. A little effort and handling solved this,

  This should not happen! The right modules can be inserted without any problem of alignment!
  Handling can damage the module!

  In my opinion, you should use another and supported the RAM module.

  To my knowledge, you can use the PA3512U-1M1G (DDR2-667 1 GB Memory Kit) or (PA3411U-2M1G) DDR2-533 1 GB
  The two should be compatible.

• Satellite Pro L20 goes wrong with i.f. audio Fast Track USB

  Hello!

  I used my Fast Track USB on new Toshiba Satellite L40 and I never had any problems with it. I could put a low latency and I did a few songs with him.

  Yesterday, I bought another laptop, thinking of recording studio at home. He used the Toshiba Satellite Pro L20. It does not work with my interface. When I listen to music on Winamp or anything on Fruity Loops, I hear strong clicks, pop, noise. They introduce samples, or they appear during playback, or after a sample is stopped.

  I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba more? The only chipset drivers are old, and you can download em only from site Web from Toshiba. The chipset is ATI Xpress 200 M. Its pilots are with the graphics card. Recently I noticed that you can download "ATI Catalyst Legacy Display Driver for Windows XP - card mother/IGP Drivers 9.11" and CRACK to make it possible to install on a mobile device like the L20. Yep it's funny, but its impossible to do otherwise!

  things that I have tried and they have still not help:
  replacement of drivers #, original were released in 2004. I installed the version.
  driver settings #, low latency, high latency
  # asio and different settings
  pluging # USB interface to another.
  # try what happens when I use the battery and when to use the adapter
  # update BIOS
  # off units such as wifi, card sound card on board
  # checked IRQ list

  persistent organic pollutants will always appear.

  my config:

  Toshiba Satellite Pro L20
  Win XP Home SP3
  Celeron M 1, 5 GHz
  896 MB of ram
  M - Audio Fast Track USB, drivers: 6.0.2

  Kind regards

  Initially, I wonder that you use old notebook L20 now. You have no more L40?

  You must understand that the Satellite Pro L20 is older model laptop and also not the best choice for such operations. This laptop is probably designed for simpler day-to-day operations such as the internet, e-mail, office, a little bit of multimedia and that s all the.

  I don't mean good old classic doesn't work with your external device, but you will be lucky if someone has the same external device and the same model of laptop and write about their own experiences.

  Do you use factory settings or you have installed the own operating system?

• Satellite Pro L20: WLan cannot find the IP address

  I just bought the Satellite Pro L20
  I have the ability to go wireless, but when I try to use it is not find my ip address?

  can someone help me? : D

  thanx
  Groovyjax xxx

  You should check the settings of the router. Check if the MAC address filtering is disabled.
  In addition, to access the WLan card properties and access the properties of the TCP/IP protocol.
  There you can check if the parameters are set on the automatically

• Need to reinstall windows, but does not have any CD - Satellite Pro L20

  Hi, I wanted to reinstall Windows XP home on my Satellite Pro L20, but do not have the software that my laptop came with (read the discs lost). I have a valid XP tone (like its stuck on the bottom of my laptop), but no disc so I tired using a copy of a cd of Windows XP home, which did not work, but let me go as far as the formatting of the hard drive.

  So now I use Ubuntu, but want to reinstall Windows. Have valid product key, but no software to reinstall.

  Any suggestions?

  Thank you

  Christopher

  Valid key will not help you. This key belongs to the image recovery and copy included WXP he.
  If you have two options. Either you order original Toshiba recovery image or use Microsoft installations CD key which belongs to this copy. All the necessary drivers, tools and utilities that you can download at Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads.

  Good luck!

• I have no sound on my Satellite PRO L20

  Hello

  I ve had a my Satellite PRO L20 (PSL25E 00K007EN) a while now and I ve had no noise. I was looking everywhere.
  I tried this thread... http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15804 and downloaded the driver that has been suggested in vain during installation, he just said :-(

  I was looking in the Archives of driver here http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=eu but I don't know m what's my product series.

  In any case, that's all the info I ask if you need additional help please thank you lol!

  OK I got the model No. and downloaded driver from the directory in vain during installation it says why this would be?

• Blocking number on Satellite Pro L20 problem

  We have about 60 Satellite Pro L20s on a network. When the user starts the computer sometimes they start with the number lock on. Its seems to be worse on some than others. It is very annoying because it causes problems with logon.

  Is it possible to disable the locking function of the number on these laptops?

  Thank you

  Mark

  Hello

  I'm a bit confused. I thought that MS L20 has no Num Lock key.
  Is it may be on a green light below the F11 key?

• Satellite Pro L20 keyboard problems not fixed by the update of the BIOS

  Hello

  When I type in MS Word or another application, certain characters are not displayed. This problem is known.
  I followed the recommendation of the TOSHIBA BIOS V1.30 for PSL25E update. Unfortunatey, it does not help.
  I would be gateful to any Advisor.

  Thank you
  olbur

  Hi Olbur

  I didn't find any official document on this subject, as you say, known issue. Can you please send a link?

  I have the Satellite L20 and there is not much difference for Satellite Pro L20 and I have no such problems, but I'm interesting about this. The L20 keyboard is not the best one, but all the characters are not displayed correctly. Maybe you type fast. ;)

• Restart the problem after booting on Satellite Pro L20 - approx. 4 seconds

  I have a toshiba satellite pro l20 series and it worked fine until yesterday.
  the problem is that it restarts... Well actually, he stops in about 4 seconds after the start, remains closed for 1 or 2 seconds and then again
  same problem occurs with or without the battery.
  all I see is the Toshiba logo. I can enter the bios and when in the bios it does not stop.
  When I get out of the bios, saving the changes he stops. and then begins by itsself after 2 seconds.
  Please help me... How can I fix?

  Hello

  If the laptop goes through the Toshiba logo then maybe there is just something wrong with the software.
  In this case, the first step should be again install the Toshiba Recovery CD.
  Put the CD in the drive and try to boot from the CD.
  After installation, all should work properly.
  If it's not, so I guess there is a serious problem and service guys should check the laptop.

• Satellite Pro L20 does not illuminate

  Hope you can help. We have a 5 years satellite pro L20 who never gave a lot of days. It runs from Win XP, had an upgrade (crucial) memory to 2 GB and a new battery 4 years ago 4 years ago. 2 days ago, he simply left with the same noise you get when force a shutdown by holding the power button down. I tried to boot with no battery, just the sector and only on a charged battery. All to nothing does not.

  I then read the button of power with the battery and removed sector I did after leaving it overnight. When I replaced the battery it started as usual and lasted 30 seconds before turning off again, and then he was dead. I have tried all combinations with the ram up to 1 stick or kidnapped and attempted to get the bios with the HDD outside as well. Still nothing.

  I noticed that when I put the battery in 2 of the 3 flashes briefly, and now the button of pwer while pushing the battery causes a brief start 4 seconds.

  Any ideas as to what this may be? I suspect that the hardware and software. Also, I tried a different power adapter, once again no results. It stays just off.

  Thanks for any help...

  Hello

  I'm afraid it looks like a serious m hardware problem
  My first idea was a malfunction of the RAM in such a case, you could replace and test the memory, but it seems that you have already tried

  In my view there s something wrong with a motherboard or a part on the motherboard :(
  In this case I n t think a replacement of the motherboard would be useful since this part is very expensive

• Satellite Pro L20 - typed keys missing

  We have about 20 laptops, Satellite PRO L20 (model No. PSL2YE-00H00EG3), and all have this problem): keyboard missing from time to time a key is pressed. All keys are affected and the question is very worrying, given that you can have a miss every 20 letters typed.

  We have tried to update the BIOS to version 1.5 to version 1.8, but we had no success.

  Any help would be appreciated.
  Thank you
  Bogdan

  Hello

  You said that this problem occurs from time to time. In this case, it would be possible that some 3rd applications have a bad influence on this keyboard as described in this announcement.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9494&TSTART=30

  You also suggested that you tried to upgrade the BIOS. Did you, or was it just a tent?

• Satellite Pro L20: Wireless connection is not reliable

  Hello

  We have some Toshiba laptops in the office.

  However, the wireless on our most recent purchase (Satellite Pro L20) installation is very reliable. Periodically he loses sight of the network without apparent reason.

  We have the device permanently connected, and the problem can occur even when the machine is in the middle of copying files to and from the network server.

  The actual wireless access point is within a few feet of distance (in view), so I can't imagine there is a problem of signal strength. Can anyone offer me any guidance?

  I don't know where to start on this one there...

  TIA
  Stephen

  Hello

  With a WiFi card has your unit (listed in the Device Manager)?

• Free configuration and Satellite Pro L20

  Hi, I use a Satellite Pro L20 and I have recently reinstalled my software, but I'm having a problem with the installation of Config Free! When I start the installer present the following problem: installation image is not correct and complete installation!
  Does anyone know how to fix this?

  Hello

  I hope that you are using the correct version. To use this device, you must use version ConfigFree V5.50.13. I installed this utility several times and I've never seen this message.

  Of course, you install your device manually. Please be careful with order facilities. On the download page, you will find instructions for Installations. Check it please this list and do not forget that you have preinstalled the unit with this command.

  Good bye

• Satellite PRO L20: Tools & Utilities CD-ROM refuses to install the audio driver

  Tools & Utilities CD refuses to install the audio driver on my system (Satellite PRO L20). No idea how to solve this problem?

  Hello

  Have you tried to download and install the audio driver from the Toshiba driver page?
  There you should find the most recent version.

  But may I ask how did you try to install the audio driver? Did you get any error messages?

• Satellite Pro L20: New need recovery CD

  I bought a satellite pro L20 and lent it to a friend of mine borrow. When he returned the laptop it was full of viruses and had to be wiped.
  I lost the disc of recovery or whatever is needed and I now have a laptop with no sound and wireless.

  Can someone help please I tried to download the drivers and they do not work and I sent toshiba and they have not responded.
  Thank you very much.
  My email address is [email protected] if anyone has a spare recovery cd...

  Hi Jonathan

  It s not very serious problem if you have lost the recovery CD. The partner of Toshiba service in your country offers all compatible devices and parts, also the CD.
  You can order the CD from this service partner.

  Good bye.