Satellite Pro L300D - upgrade Vista do Windows 7

Similar Questions

• Satellite Pro A210 upgrading Vista to Windows 7

  Hello

  Can anyone suggest why I have problems with 32-bit vista upgrade to windows 7-32 vista?

  I don't know if it's because there is not enough RAM

  Anyone else had a similar problem on this laptop?

  Thank you

  CLary

  I recommend that you clean Win7 installation.

  What Satellite Pro A210 you have exactly (A210-xxx)?

• Satellite A305D-S6848 - upgrade Vista to Windows 7 32 bit

  I started the upgrade process, but it gives me a message that I need to uninstall ATI CATALYST Install Manager, ATI Catalyst Control Center. My laptop is model A305D-S6848 Vista 32bits. I don't know where to start getting that if someone can point me right direction to get this?
  Using my laptop ATI Radeon X 1250 graphics card.

  Any help will be greatly appreciated, thanks

  Hey Buddy,

  I think you need to uninstall the ATI Catalyst (display driver) driver because the version is too old and is not compatible with Vista. You can uninstall the display driver in Control Panel > uninstall the software. There you should find a list with all installed programs and drivers.

  New display driver, you can download on the official website of Toshiba:
  http://www.CSD.Toshiba.com

  Check this box!

• Installation of Windows XP on Satellite Pro L300D-136

  Hello

  I realize that this question is very similar to those posed elsewhere on these forums. I tried after the solutions proposed elsewhere but were unable to do anything at work.

  I'm trying to install XP Pro on a Satellite Pro L300D 136, which is currently under Vista.

  I tried to get into the BIOS and change SATA compatibility mode, but I still get a blue screen of death when booting from the installation disc. Reading elsewhere on the forums, that I understand that I have to use nlite to include drivers SATA on the installation CD, I'm not sure how to find out what drivers I need. Number of threads talking about MSM from Intel, but my machine has an AMD Athlon processor. Does make a difference? Where can I find the necessary drivers in the download section of Toshiba?

  Thank you in advance for your help, this is the first time I tried to replace a windows with another OS...

  Yes, it makes a difference.

  For laptops equipped with AMD processor (they don t have an Intel chipset) you need the display driver.
  In the display driver package are the SATA drivers you need.
  You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite Pro L300D - 11 M - need drivers for Windows XP Home edition

  Good afternoon! Help to find the drivers on the operating system Windows XP for Toshiba Satellite Pro L300D - 11 M
  Thank you!

  If I have not clearly written something that you let me know please, I'm simple I do not speak English, I have Russian and to transfer, use the online translator.

  Master_of_Disaster

  Big thanks for help!

• Satellite P200 - 17 c - upgrade Vista to Windows 7

  I'm looking to upgrade Vista to Windows 7, anyone done this? And all their problems with drivers etc?

  Thank you

  Hello

  I put t know what you want to hear exactly now, but you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know that this model P200 belongs to the PSPB6 series.
  Therefore, it seems that all the drivers available for Windows 7 32 bit.

  In general, Vista and Windows 7, I can say that new OS runs much faster and has never had a problem yet. I can recommend it! :)

• Satellite Pro L300D PSLC9E - failed to update BIOS

  Hi all

  I got a Toshiba Satellite Pro L300D Windows Vista Business, this isn't that four months, recently, he began to break up and whenever he did, I got a message to upgrade the BIOS.
  So I went to the Toshiba Site and I downloaded an updated BIOS yesterday and installed even today, during installation the PC frooze.
  I left it on and it stayed like that for four hours, then it turns off.

  Now, when I turn it on all that I get is the fan turns to nothing else.
  The powerleader was connected to the laptop all the time.

  Do you have any ideas on what I can do, I have heaps on the laptop I would not loose.

  Model is PSLC9E Satellite Pro L300D

  The case is clear buddy update the BIOS has no procedure
  Perhaps the BIOS might not be updated correctly because the laptop crashed until the update procedure could be completed.

  Well, I can tell you that you will not be able to fix it yourself it's a serious issue and ONLY the ASP (certified partner) would be able to help you!

  So contact the ASP technician and ask for later handling.

  Good luck

• Satellite Pro L300D SP5802 tools and BONES

  Hi guys
  I just bought a Toshiba Satellite Pro L300D-SP5802 laptop and it has Windows Vista
  I have havve 2 recovery DVD. One of these States for Windows XP Professional.

  I would like to know before all formatting:

  1 XP Recovery DVDs will help me with the drivers, utilities, etc. When I install Windows XP?

  2. will I need an additional XP license? or can I use the key provided at the bottom of the laptop?

  3. some URLs to get the upgraded drivers for this model? (no info at toshibalatino.com)

  Thank you very much in advance

  Hello

  I'll try to answer your questions ;)

  1 recovery image contains all the drivers, tools and utilities and after recovery image installation you don't need to install anything. Everything will be installed correctly.
  2. don't you are useless there. This is image recovery and not typical installation where you must enter the product key.
  3. to give answer to this question, please let us know in which country you purchased your laptop.

  Good bye

• Satellite Pro L300D - 22nd: Installation Win7 64-bit ends with BSOD

  Hello

  I'm having a major problem to install 64-bit Windows 7 Enterprise Edition on a whole new Satellite Pro L300D-22nd. Windows 7 32-bit and 64-bit of Windows Vista install correctly with zero problems or questions.

  I tried...

  Installation CD start-up costs
  Update install leave in Windows Vista 64-bit with the latest device drivers
  Off the device in the BIOS

  Everything I try to get exactly the same result...

  "STOP: c00021a {fatal system error}.
  The initial session process or system processes set end unexpectedily
  Blocking indicator 0 x 00000000 (0 xC0000001 0 x 00100438).
  The system has been shut down. »

  Anyone know what could be causing this and how I can go about fixing the problem and get Win 7 64 bit installed on this laptop?

  Thank you

  What version of Win7 is this?

  Beta? RC? RTM?

  Have you updated the BIOS with the latest version?

• Devices Satellite Pro L300D-110 - downgrading to XP Pro - HARD drive missing?

  Hello to everyone in the Toshibe Satellite Pro - my first post forum.

  I was one proud owner of other portable Tosh without any problem, but this time, I'm miserable: (o)

  For professional use a few days ago, we bought a laptop Satellite Pro L300D 110 (AMD Athlon Dual Core). We bought it with the understanding that it could be brought back to XP Pro - mainly because some of the software that we use on a daily basis does not work reliably on Vista, but also because all other laptops to desktop computers in our network (including a WLAN) all running XP Pro, adding another machine that it should have been easy.

  The need to do so has been confirmed by the fact, nevertheless, I tried, we could just not get the new Toshiba L300D connection through our routers so that under Vista. At the same time, we also bought a new Dell with no o/s. I installed a new copy of XP Pro SP2 OEM - and it runs under the sweet as a nut! Sorry, I digress:

  I reduced the L300D to XP Pro very well using the XP Pro provided - Toshiba Recovery disk no problem at all. I had the computer connected to the network too, but then I realized that the DVD (Pioneer DVD - RW DVRTD08A ATA) is not found by Windows.

  Logged in the BIOS setup - Yes, he was listed there OK, but tried some tongs and tricks I have learned over the years, I still couldn't XP Pro to the discovery of the device.

  I have now reinstalled Vista on the machine and he found the DVD burner.

  If it's a PC, I shut down the computer, open the case, disconnect the writer, start, stop, reconnect the device, close case and bingo. But not with perhaps a laptop...

  Someone has ideas how (reliable!) downgrade to XP Pro without devices being endangered? Any help would be greatly appreciated.

  I have two copies again more XP Pro SP2 at my disposal, if that's any use.

  Kind regards

  David

  (> I'm happy again now: o)
  Great to hear that!

  Just for info:
  The most recent series of portable supports the newer SATA HDD controllers and so the operating system can be installed if the SATA drivers are not included and preinstalled.

  So if you want to use the SATA features you must first install the SATA driver.
  But you can also activate SATA mode to compatibility mode (in BIOS) and this would install the Win XP without the necessary SATA drivers.

  Good bye

• Re: Satellite Pro L300D - 11O 800 MHz RAM installed, only to 667 MHz

  I recently bought a Satellite Pro L300D-11O, which has a single stick of 1 GB 800 MHz RAM installed. However this RAM work only at 667 MHz. I checked this in Linux and Windows Vista.

  The laptop is announced as to have 800 MHz RAM on this page:

  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 1055796

  The manual of the user who wrote:

  "PC2-6400 memory module works as PC2-5300 speed the GL40 Express Chipset Express chipset/GL965"

  I don't know what chipset I have, and it would be surprised that this would be the case that the above Web site explicitly states RAM 800 MHz.

  Can someone tell me please?

  Hello!

  Now I'm a bit confused of Mr. I think you did search in the wrong user's manual because the Satellite L300D has no Intel chipset.
  On the Toshiba site, you can download the manual for Satellite L300D:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online download user manual

  I think that your chipset only supports 667 MHz. normally the RAM always works on the highest speed that is supported by the chipset.
  Check the specifications with Everest or PC Wizard 2008.

  Good bye

• Satellite Pro L300D started crashing when you are connected to the projector

  Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
  He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

  I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

  Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

  Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

  Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

  To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

  Someone at - it an idea on what could be the problem?

  RGS
  James

  Hello James

  Can you please tell me what mode you are using for the presentation?
  Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
  Do you have problems if you use the single external device (LCD screen is OFF)?

  Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

• Upgrade Vista to Windows 7 or 8.1

  How upgrade Vista to Windows 7 or 8.1?    What is the best to use?  I would like to use Internet Explorer.  One of them comes with it?  Don't want to lose bookmarks.

  Thank you.

  From all versions of windows with Internet explorer,

  Win - 7 is the best on all that's left is win 7 pro

  http://www.Newegg.com/product/product.aspx?item=N82E16832416804

  Win - 8 or 8.1 is about the biggest flop M$ has ever released.

  If you want that your bookmarks and other personal files I would transfer to a portable hard drive or a flash drive if you can reinstall them.

  https://www.YouTube.com/watch?v=R_4MqobX4Mw

• Satellite Pro L300D ubuntu and Driver Chicony Webcam

  Hi all

  Im having problems for my webcam to work on my Satellite Pro L300D laptop, its supposed to be for a Chicony b070.
  Before leaving, perhaps you should know Im using Ubuntu 8.04 Hardy Heron (still not improvement since this is a production machine).

  A more complete report can be found [here: https://answers.launchpad.net/ubuntu/+question/51545]

  Basically, the dev is created but it seems that HAL does not know how to work with it: S Im not even not sure Im in need of a driver in itself or just a tweak of config...

  Thank you for your time

  Hello

  As you can see for days nobody anything post here. I think the reason is quite simple. Linux is not supported and most people use the preinstalled operating system.
  I think you should try to find the answer on the Ubuntu forum. Here you can meet people with good experience of Ubuntu.

  If you find a solution please let us know. All useful info may help others here.

• Satellite Pro L300D: Cannot install because of the common Modules control utility

  Hi guys,.

  I'm new to this forum, but I spent two days looking around.
  I have a sat Pro L300D that I'm downgrading to XP, because many are, and I can't get the touchpad to work or function buttons.

  One problem seems to be to install the utility 'controls', which gives the message "common modules" not installed even though it was the first pilot, I have installed.

  Does anyone have any suggestions?

  OK, here we go.
  Toshiba pilot European page doesn't provide drivers XP ALL, tools or utilities for the Satellite Pro L300D.
  Is this good? I checked the page and there are no. XP applications.

  So I came to the conclusion that the common Modules cannot be installed because this software was not designed for this series of portable and therefore, you receive this error message.
  It is clear!

  So Don t wonder what impossible to install "utility controls" or common modules. These pieces of software are not compatible