Satellite U400 - PSU40E Synaptics touchpad problem after the recent update to BIOS

Similar Questions

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• Satellite A200-23U - DVD - ROM problem after the firmware update

  Hello! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I day first TO02, then TO03 firmare. No error has been shown. After the reboot, my device is locked (is not open / eject button or by any software) and ImgBurn (for example) can't find writers. In system devices now it is shown that:
  IDE\CDROMTSSTCORP_CDDVDW_TS-L632H___*boot*___\5&1AC5D6C0&0&0.0.0 (I think that there must be * TO03 * not * START *)

  What is the problem and how can I solve this problem?

  PS. sorry for my bad English)

  You can try to reflash the drive down to T02 OR you send the machine to an authorized service provider or they fix this problem.

  Could first check if the downgrade works?

  Welcome them

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• Help! MicrosoftOffice 2011 cannot open the files after the recent update

  After the recent update (security 2015-006, Mac OS 10.10.5, Yosemite), I can longer open all files in Microsoft Excel or Word.

  When I tried to open the files in the "Open recent" list, Excel reports "Excel cannot open the workbook. The file name or path contains invalid characters (for example, /). "Same error message appears when I go into the folder and open the file in Excel.

  When I tried to open an existing file of the word, he pointed out that "this is not a valid file name.

  PS: Please do not suggest you use everything as your other favorite programs.

  Click the folder just below the recent and see if documents are on my Mac. Additionally, click on a reader-Documents-then the file name and see if the same thing happens. I downloaded the update of security on the App Store and have no problem. Also, in your menu bar, go to help in the Office applications and updates. An Office 2016 update was released last Friday, December 11.

• Renderer missing after the recent update

  Hello

  I use Adobe CS5 on a 64-bit computer to Windows 7 with 12 GB of RAM. Even though I have a Quadro CX. the CS5 first complains that he cannot use the Mercury Playback Engine the GPU acceleration. It happened after the recent update to CS5. I checked the contents of the cuda_supported_cards.txt file and there seems to be no problem at all. I'm lost. Any kind of help will be appreciated.

  

  Try to update your video card driver.

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• Is it possible to restore the realization of streak of moving after the recent update of watch?

  Is it possible to restore the realization "streak more long movement" after the recent update of watch (v2.2)?   I had a streak of 44 moving goes when I updated the watch (04/04/16).  After the update, although I continue to exceed my goal of moving, I no longer get the prize for the longest series of moving.  Data are always available in the watch (I can see all complete circles).

  Hello

  While it may be that for any other achievements being credited, may be useful for the future allocation of achievements to close open applications on your iPhone and then restart your iPhone and your watch:

  • To close open applications on your iPhone: click twice on the Home button, and then drag upward on each preview of the app.
  • Both devices turn off together, and then restart your iPhone first:
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.
    • To reactivate: press and hold the side button until you see the Apple logo.

• After the recent update Windows Vista (Japanese OS) Firewall/Malware WARNING

  Hi, I am faced with a new type of problem since the recent update of Windows. In fact I've been using computer for a long time and on computer there's always Norton Internet security (previous Anti Virus) also, I had Malwarebyte s anti-malware installed and did not get the message "security WARNING Windows turn on the firewall and malware". When I tried to click OK, it won't because I'm already using Norton and Malwarebyte s.

  This message is very annoying, I want to turn it off, but I can't.

  Would you please let me know the steps how can I disable it?

  Thank you.

  

  Hi Ari,

  This could be a temporary problem, please run live on your Norton Internet Security Update, until you get the message "No updates available", and then restart the computer. If the problem persists, run Norton Reinstall tool by www.norton.com/nrnr to reinstall Norton Internet Security and let us know if this helps.

  Thank you

  Charlie

  Norton support

• Computer Touchsmart 520: touchsmart 520 pc restarts after the recent update

  After a recent update to the stop, when I restart my computer, it crashes on the initial screen of blue with the hp logo. I hit the button esc several times to enter setup and nothing happens. What can I do to possibly enter safe mode and restore my system to the way it was before the recent update?

  Hi there @kencl65,

  That the Forums are with you!  I understand that you are unable to start your system correctly after a recent Windows Update.  I'm happy to give you a helping hand with this.

  Please see this document which has a process, you can follow this s cover the situation of departure and suspended at the HP Logo: HP - computer desktop PC won't start not (Windows 10.8), as well as covers of system restore and recovery.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Open Office works after the recent update

  Open office

  I use Open office, but after a recent update it doesn't seem to work... Any suggestion that could help me solve the problem...

  The latest version of OpenOffice is 3.3.0. If your own copy is out of date, maybe it's time to get the latest version.

  Other concerns can be better directed to the OpenOffice community in their area of support here.

• Extremely slow after the recent updates.

  Nice day!

  After a recent update, my computer starts extremely slow for example, a file transfer time to initialize very low speed. No hardware changes have been made, and everything was in tact. The CPU usage is very low, but the computer does not respond, what the hell. Initially the system would be stuck on windows startup, but I waited until what he actually started upward because it usually takes less than 2 minutes to start. I tried system restore to restore to before the updates were installed and it worked! I wanted to just know how can I find out what update caused the problem or do I stop updating?

  Windows 7 Ultimate 64 bit SP1
  See you soon!

  Andrew

  Install all a test for signs of the back problem, you go. When you have identified the problem update and then use the correct way to remove the update or select Start, Control Panel, programs and features, see installed updates and follow the instructions under uninstall an update.

• After the recent update of Win7, computer will not remain in hibernation

  After a recent update of Windows (probably to fix something else), my computer refused to stay in hibernation.
  This is a 64 bit machine running Win7 Pro, and he wakes up now randomly after going into hibernation.
  I tried using 'powercfg' to see what is wake it up - no result.
  I tried to use 'powercfg' to deny the mouse and network which apparently have permission to wake up-no result.
  I unplugged the mouse in case there is a vibration of the earthquakes to chance - no result
  I unplugged the cable to the router in case there is a stray signal from on the internet - no result
  I went into the "Network properties" window and turned off all the "wake up" properties - no result.
  I looked at similar questions on this forum and checked "of performance issues" in the Panel as not advised - no problems to report.

  OK - what makes the Microsoft with a recent update to cause this problem and when they're going to cancel it?

  Hello

  Try the following and see if it helps.

  Method 1:

  I suggest you to check the update history to discover the updates installed by following the link:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  
  Method 2:

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  Method 3:

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Reference: (why doesn't my computer go to standby or hibernate as expected, or why it suddenly wake?) from the following link.
  Sleep and extended: frequently asked questions: http://windows.microsoft.com/is-IS/windows7/Sleep-and-hibernation-frequently-asked-questions

  How to disable and re-enable hibernation on a computer that is running Windows: http://support.microsoft.com/kb/920730

  Note: If you still have the problem then I suggest you to perform a system restore to a point when the computer was working fine.

  System Restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore