Satellite Pro lack driver control of network

If im points do not fingers but anyway my laptop has managed to lose its network controller driver (im blaming the cat.) My problem is to reinstall this driver requires a connection to the internet which, because of the missing driver, I don't have... it's a viscous cycle... If someone can send me the link to the correct driver would be great as I have tried for hours hours to reach this sort, much to the annoyance of my friend who has a laptop I was using...

My laptop stats:
model: satellite pr l450 - 17q

network controller:
Hardware ID: PCI\VEN_10EC & DEV_8172 & SUBSYS_81920EC & REV_10
Device ID: \Device\NTPNP_PCI0021

Any help would be appreciated.

I assume that you need a card Realtek WLAN driver, right?

Tags: Toshiba

Similar Questions

  • Can someone point out the card network for Satellite Pro C850 driver?

    Hey, I have re installed Windows 7, but I forgot to download the drivers. I needed before hand. I can t have access to the internet on this subject to update the drivers. If someone could please please find the network drivers for the Toshiba Satellite Pro C850 cards and post them here!

    I don't want to download a driver manager. Just the drivers please!

    To help we need more information. You use Win7 32 bit or 64 bit and what model of laptop you have exactly?

    Anyway, if you can access the internet with another PC you can find drivers on http://www.toshiba.eu/innovation/download_drivers_bios.jsp

    Check it out.

  • Satellite PRO P200 (PSPB7E): LAN PCI network resources - conflict problem

    Hey,.

    I have a Satellite PRO P200 and I have some problems with the local network. (not a wireless).

    When I plug in the network cable, the system want start at all. The blue power let towers and it is all tha comes.
    If I turn off the laptop, unplug the cable and turn it on, it starts, but the network card is more installed.
    I already downloaded the driver from Realtek for Vista 32 bits from the website, but no difference.

    In fact, the driver is not recognized as being a good driver for the device. I select the driver manually in a list (using have disk etc..) to get installed it. After the re-setup all the parameters of the network card in Vista or disappeared, always on dhcp.

    I already had a blue screen (vista dump), during the installation of the device.
    And a mistake:
    Conflict of resources - controller Netword PCI in the location 08
    Bus: 04, device: 00, function: 00
    Press to return to for Setup.

    I also tried to turn the peripheral as the third lan of start-up, but it automaticaly turns on again.

    I tried to update the bios to the latest version, she too successful (not), but it did not solve my problem.

    Any ideas?
    hardware failure?
    I guess that's not possible the device lan switch?

    Hello

    I read a lot of stories here, but yours is really amazing. I don't know what the problem is here, but try to enter the BIOS settings and set it to the default value. After doing this install OS using recovery media.

    Now that you must clean preinstalled OS and your laptop will have factory settings. Please retest the functionality of network card. If the problem persists, you need professional help.

  • Satellite Pro A300 - Service Control Manager: atapi PCIIde

    Hello

    Laptops Satellite Pro A300 - 1DH with Windows XP SP3

    This laptop is very slowly that we restored Windows XP and we have upgraded all the driver of your Toshiba site.
    We have also installed all Microsoft Update.
    But...
    find an error in the event log:
    Event ID 7026
    The next (s) starting or starting system could not load: PCIIde atapi

    Help me

    (Sorry for my English)
    Thank you
    Raffaella

    Hello Raffaella

    To be honest I don't understand what exactly you want. Help with what exactly?
    There is mistake, but I hope that you can still use WXP.

    I don't know what that means but if portable WXP supported is installed with Windows XP SP2/SP3 home edition and if all the stuff from Toshiba are installed in the order of good facilities all work OK.

    I get the Windows XP Home edition recovery media with my Satellite A300 and WXP works perfectly. Another thing is updated Microsoft. It is well known that these updates can have a negative influence on already preinstalled Toshiba drivers and you can lose the functionality or the driver will stop working. So if you want to install Microsoft updates install some updates marked as important.

    By the way: do you too use WXP recovery or your own installation of Microsoft?

    One last thing: PCIIDE ATAPI belongs to integrated controller and control the readers. Your laptop HARD drive is drive SATA drive PCIIDE Standard cannot be dependent.

  • Satellite Pro A100 - driver Nvidia GeForce 7600 Go blue screen problem

    Hi all

    I have a problem with my Toshiba laptop Satellite Pro A100 PSAASE.

    Description of the problem:
    During a game for half an hour the screen darkens and a second view later, I get a blue screen.
    After the reboot, that the solution of the problem of Windows Vista tells me that the problem is caused by the graphics driver Nvidia see dietails below:

    Problemsignatur
    Problemereignisame: BlueScreen
    Betriebsystemversion: 6.0.6001.2.1.0.768.3
    Gebietsschema-ID: 3079
    Files that help describe the problem:
    Mini101708 - 01.dmp
    SysData. XML
    Version.txt
    More information about the problem:
    BCCode: 116
    BCP1: 87A8A3A0
    BCP2: 8C8109B0
    BCP3: 00000000
    BCP4: 00000002
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1
    Serverinformationen: 1daf36bb-f6aa-446d-9ddf-545744789c19

    I tried to find a solution or a new driver for my graphics card, but I couldn't find any useful information. I really the lates driver for my graphics card according to Toshiba lateral support (driver version: 7.15.11.5616), on the Nvidia homepage I also could not find a newer driver that I have.

    Details on my laptop:

    Modellname Satellite Pro A100
    TEILENUMMER PSAASE-00G004GR
    Serial number 27069711Q
    BS-Microsoft Windows Vista Version? ¢ Home Premium 6.0.6001 Service Pack 1
    BIOS 6.00 version
    Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz
    2048MB RAM Arbeitsspeicher
    Festplattenkapazitat 120,580,372,480 [bytes] 112.299 [GB]
    Capacity of the freien Festplattenspeichers 27,078,627,328 [bytes] 25.219 [GB]
    Video NVIDIA GeForce Go 7600 Version = 7.15.11.5616
    Bildschirmauflusung 1280 x 800 pixels
    Farbqualitat True Color (32 bit)
    Its Realtek High Definition Audio (with SRS) Version = 6.0.1.5326
    Netzwerk Intel (r) PRO/Wireless 3945ABG Network Connection Version = 11.5.0.32 MAC-address = 00:19:D2:5E:37:D2
    Intel(r) PRO/100 VE-Netzwerkverbindung Version = 8.0.44.0 MAC-address = 00:A0:D1:6 B: F1:F5
    Modem TOSHIBA Software Modem Version = 2.1.73.0
    Internet Explorer 7.0.6001.18000
    IDE-Gerät TOSHIBA MK1237GSX ATA Device
    CARPET * a DVD-RAM UJ-850 s ATA Device Version = 1.10 FW
    YC3555P CIP693I SCSI CdRom Device FW-Version = 1.0

    I really would apreciate if someone can help me solve this issue.

    > During a game for half an hour, the screen darkens and a second view later, I get a blue screen.
    Well, my first thought is that this problem is related to the graphics driver.
    I mean it could be a software problem.
    But I know that a BSOD can also occur if the graphics card chip began to malfunction.
    In your case I m not sure what could cause this problem. But to play a game, that the GPU is running with a maximum yield and produce a lot of heat. If the temperature rises to a higher level the GPU can also cause a BSOD.

    Anyway, first of all, you must check if the graphics card driver update could solve this problem.
    Maybe you could use a driver from other websites but please note that this is ONLY possible at your peril!

  • Satellite Pro A300 - driver Webcam cannot start under Win 7

    Recently bought a satellite Pro A300 and immediately updated from Vista to Win7 Pro Bus.
    Do not use webcam before upgrade.

    After upgrade, after downloading and installing the Toshiba Chicony webcam software, continually get message "Webcam driver open fail." "Please restart camera or computer.
    Camera appears in Device Manager and says driver is a Microsoft 6.1.7600.16385 driver v dated 06/21/06 (very pre-Win7!).

    Have you tried unistalling/reinstalling software camera assistant with and without first uninstalling the program camera in Device Manager, but the same error message comes back every time. I would appreciate suggestions for a fix.

    Hello

    In your case, I would try to install the latest driver for the webcam of Toshiba. Install this driver and try again. Also, make sure that this latest version of the BIOS is installed for your laptop.

    In addition, it would be interesting to know if the same problem happens on Vista. You should try it with the factory settings. So that you can identify if it s a hardware or software problem.

  • Should Satellite Pro M70 driver SATA?

    Satellite Pro M70 must SATA driver for HARD drive?
    If yes where can I find it?

    Hello

    Hmm. Satellite Pro M70 is a bit older, but it supports the SATA HDD controller and usually the SATA drivers should be included.

    As far as I know that Windows XP should include SP2! This is important.
    In addition, you must include the driver AHCI (Intel SATA AHCI Controller V5.1.0.1022) for Win XP.

    Usually, this driver should be required to get the XP working on the M70.
    Just Google for this Intel SATA AHCI Controller driver
    Page Intel should also provide this driver too

  • Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

    Hello

    My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

    Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

    If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

    Thanks for any help or ideas
    Steve

    After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
    But I can't give you a reason why it causes an error.

    I found this similar thread in the forum
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

  • Webcam on Satellite Pro U300 driver failure

    Hello

    I have a Satellite Pro U300 with windows XP pro.

    When I run my webcam, I get the message:

    "oben driver webcam fail, please restart camera or computer.

    On the homepage Toshiba that I can't find a driver for the webcam, what can I do?

    Thank you

    Very useful. Thank you very much!!!

    Good bye

  • Satellite Pro A300D - driver for multimedia audio controller

    Hello

    I have Toshiba Satellite pro A300D and someday the built in mic, built into the camera and the speakers stopped working.

    When I checked the Device Manager, I saw that the driver for the multimedia controller wasn't working so I uninstalled and went on the toshiba site for the installation of the new driver.
    When I watched the drivers to my computer, they have everything except this driver!

    Is there anyone who knows were I can find it?
    I use the computer to work with the music and I'll record some people soon and I really need to work!

    Best regards

    Hermann

    Hi Hemmi,

    Interesting to know is which operating system you have.
    Can you post this information?

    Generally, all the drivers are placed on the Toshiba driver download page. There is an audio driver for normal output audio (speakers) and the webcam software. The latter you must also for micro because it s a part of webcam.

  • Can I install a DVD - RW on my Satellite Pro A10 drive?

    I want to upgrade the drive of DVD ROM/CD-RW (SD-R2412) on my Satellite Pro A10 on a DVD - RW drive, so I can burn DVDs. I bought a Toshiba (TS-L632) DVDRW drive, because it's exactly the same size and shape, such as the existing DVD ROM drive, the same voltage (5v) and the same connector.

    However, after installation and setting on the laptop, it is not recognized as being installed that is to say, there is no sign of it at all on the computer. Is it because the laptop is completely unable to support a DVD - RW disc, or have I bought an incompatible device? If so, is there a compatible DVDRW drive?

    Thanks in advance,
    Fred.

    PS the exact model of the Satellite Pro is PSA15E - 0115Q - EN

    Hello

    All the sides are unusable on each laptop model. It depends on the assignment of pins. Toshiba offers a list of all compatible readers in paper manuals s user.
    I ve checked s manual for your model of laptop, and here you can find a list of all compatible optical disk drives, you can use with your model of laptop. See pages 4-8.

    Choose the one that suits.
    If you do not visit the Toshiba download page. Here you can find.

  • Satellite Pro A10 drive compatibility list?

    Hi all, I have a hard drive to be replaced for the House of /2.5Ghz/30G/256Mb/XP Satellite Pro A10.

    The pins of the connector appear more highlighted than many 2.5-inch hard drives. Don't want to take the risk of buying an inconsistent player. Is there a list of compatible drives anywhere, or someone may one suggest that costs about £50 - ish. ? Not too concerned about the size, 30-40Gb would be perfect. The original MK3021GAS is hard to find or expensive or repaired, and I'd rather have a new.

    Cheers for any help.

    Hello

    This unit came with a 20 GB; 30 and 40 GB HDD.
    You can use these hard drives without any problems.
    Unfortunately I n t found the necessary part numbers but all devices, such as HARD drive, you can order from Toshiba service partner in your country.

    You can find addition information:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  • Satellite Pro A40 - driver Windows 7 sound.

    Hi, IM running Win 7 beta on one of my laptops, which is be a satellite pro a40.

    Ive got everything right except the "multimedia Audio Controller" aka the soundchip and the display adapter, which doesn't really count that I can see the screen etc anyway.

    Now all I really need are vista 32 drivers where they are compatible with windows 7 32 OS.

    But I can't find anywhere and archive here only has win2000 and xp more, I tried both and no work.

    Help!

    Thank you

    I think you should search for drivers if external websites on the Toshiba site are not drivers for Vista available.

    As far as I know that the Satellite Pro A40 is equipped with an Intel graphics card and so you should find the driver on the Intel page
    [www.intel.com]

    In addition, the laptop has a card his Analog Devices. I checked the manufactures Web site and in the [FAQ-area | http://forms.analog.com/Form_Pages/soundMax/soundMaxSupportFAQ.html#question1] I founded the following information:
    > SoundMAX provides no drivers or software directly to computer users. To download drivers, you must contact the manufacturer of your computer
    You will not find a driver for the sound card, but maybe an another Toshiba notebook is equipped with the same sound card so that's why you can find a driver for Vista.
    Check it!

  • Satellite Pro 2100: media control buttons do not work

    Hello friends,

    I have a Satellite Pro 2100 on EBay and it is very good, but my media keys Play/forward/reverse fast/Stop/6CD have no Funktion Audio Player installed what is the problem?

    I need help...

    [email protected]

    Andy from Germany

    Hello

    Check if the controls of TOSHIBA is preinstalled on your device. It should be included in the Panel.

  • Satellite Pro R50 - brightness control F3 does not work

    Hello

    I have a R50 Pro Satellite - bought just 1 month ago.

    Suddenly the order of function F3 to control light intensity has stopped working.

    The brightness can down with F2 function but F3 does not work

    F3 in the software and the operating system back to research, but do not work by pulling the brightness setting.

    So I'm stuck with my brightness down as low as it goes.

    I downloaded the latest driver for the feature key and installed, so it isn't that.

    Anyone got any help they can give?

    See you soon
    Craig

    As a temporary solution, you can change the brightness in the power settings.
    I really don't understand what the problem may be, but try to reinstall the utility system then Toshiba and Toshiba driver to feature key.

Maybe you are looking for