Satellite Pro M300 - error 2131 when burning CD - r in itunes

Similar Questions

• Satellite Pro L - error message when I try to play a music CD

  When I try to play a music CD I get this error message >

  + "The version of this file is not comparable with the version of Windows you are using. Check +.
  + system information from your computer to see if you need a x 86 (32 bit) or x 64 (64 bit) +.
  (+ version of the program and then contact the software publisher.) » +

  He plays on my old XP 32 bit office but will not play on computer laptop 64 bit Windows 7.
  The CD is not a commercial manufacturing, but it is important for me.

  Any ideas please?

  Pete

  Hey,.

  Try your hand at playing the CD with Windows Media Player or player exactly?

  You can try to play with VLC media player. It s my favorite player because he plays all audio and video files and it s freeware :)

• I get an 0XC0AA0301 error code when burning DVDs...

  I get an 0XC0AA0301 error code when burning DVDs...

  Hi mohamed,.

  Thank you for visiting the community Microsoft Windows 7.  This message provides troubleshooting steps about the error you received when you try to burn DVDs.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

  I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

  Running windows 7

  original title: cannot burn DVDs

  Hello

  You can disable video filters in Windows DVD Maker, and then check.

  Video filters in Windows DVD Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

• Satellite Pro A200 error (PSAE4E) during the firmware update Disc Creator

  Hello

  I get the following errors when you try to update firmware for Disc Creator I use Windows VIsta Home Premium.

  An unexpected error has occurred.
  Error code: 32007C-26-00000015

  Followed by:
  Error code: 320129-26-00000015 - then application goes down.

  All solutions to this
  Thank you

  Hi guys

  I'm a bit confused of m.

  > when you try to update firmware for Disc Creator
  Where did you get the firmware update for Toshiba Disc Creator?

  I checked the page European driver Toshiba and Satellite Pro A200 (PSAE4E) download area and, unfortunately, I didn t find updates for Toshiba Disc Creator.

  So I really wonder about this problem. He s strange

• Satellite Pro 4300: error - NTLDR missing

  Hi all

  I have an old Satellite Pro 4360, P3 700 mhz.
  I'm trying to upgrade the Bios to install Ubuntu Linux.

  However, by following the instructions on the download of Toshiba Bios, IE change the boot sequence for the floppy drive with the disc in the drive that contains the update files, I can't update and just got the message:

  NTLDR missing

  Someone help with this?

  Also, when I try to run the live CD, after changing the boot sequence in the CD-ROM, I get no response and the computer continues to boot from the disk with Windows 2000 Pro?

  Someone help with this?

  Hello

  "NTLDR is missing" usually means that the "NT Loader" of an operating system with the kernel NT or NT-technology cannot start the operating system. (Such system NT could be Win NT, Win XP or Win 200o)

  But it s strange when a drive reports an error message. What was on the disk before? Was the drive some disk before starting? If so, then proceed as follows:

  Format the drive in Windows 2000 with the option to make a disk and copy the files from the BIOS on this subject. Then boot from the disk and update your BIOS. Ususally it should work.

  Please give a few comments if you managed...

  Welcome them

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Satellite Pro A210 - error recovery after a new installation of HARD drive

  Hello

  I have a satellite pro 210 (bios v1.6) has died the HARD drive.

  I bought a new WD Scorpio Blue 250 GB HARD drive and ran the reinstall drive (I've done exactly this for a friends Equium a month or so back and all worked flawlessy!)

  Everything worked fine until the first re-boot, went through the usual stuff:
  Please wait a moment while windows starts for the first time
  Then a windows background, spinning slider with waiting message please, much HDD activity
  Then the sudden error:
  "Installation of Windows could not configure windows to run on a hardware on this computer."

  Does anyone have ideas, what it might be?
  A google search suggests the sata bios settings, but I do not see in the configuration of the bios page.
  In my view, there is a new bios v2 by download - would this help?
  If so how can I install it when the computer does not start vista? Or any other suggestions?

  Thanks for reading.

  Cheers, Stephen

  Hello

  The SATA driver is not necessary if you use the Toshiba Recovery disk because the image on the recovery disk contains the SATA driver.
  So there must be other reason for it.

  In your case, I recommend setting the BIOS settings by default and start over once the recovery procedure.
  Maybe something went wrong during the configuration of the OS if second installation is worth a try

• Satellite Pro 6000: error LED message - what does this mean?

  Hello

  I have gad an old Toshiba Satellite Pro 6000. Sometimes, not after a period, he died. I have gad error code because the DC IN Red flashes orange. The blink rate is 1 x 3 long short 1 x length 2 x 1 short long = 10001001 in bin = 91 h (is this true?)

  Now 91 h ist the following error: 1R5 - E1V voltage is not more than 1.275V when the computer is turned on. But what the hell of this error means? What is 1R5 - E1V?

  Need help. Greetz

  Hello

  Read the code back!

  10001001 = 1001 0001 = 91 H
  http://www.prepressure.com/library/BinHex.htm

  I think there is something wrong with the electronics of the Board of Directors.
  Therefore, you will need to contact the ASP from Toshiba for help.

• Satellite Pro A300D - error during DVD playback

  Hello

  I have a problem with my satellite Pro A300-140 under Vista 32 - bit OS

  Whenever I try to watch a DVD I get an error message "unable to output the video to an external device. Please check the external output setting after the end of the application "-I don't mean to connect what - I want to just watch a movie!

  Ideas - I've read, it's a known issue, but I can not re - find information?

  Thank you

  Hello

  I don't know what the problem with your Dvd Player, try to open with Power Dvd, you can download

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html

  Just to check if it is software issue
  Welcome them

  Post edited by: Jeka-HE

• Satellite Pro S300L-105 - whistle when power is removed

  I recently bought a Satellite Pro S300L-105, it works normally, except that it produces a hissing light, sharp, witch can be heard when the power is removed. After less than 10 minutes to help, I feel pain in my ears and brain and it becomes unusable.

  I don't have any problem hearing or so. and I've never had such a problem when using any other computer.

  That was it for, and the manufacturer how can for me?

  Hey,.

  Which is really strange. I have never heard of this issue, and this happens only with the disconnected AC adapter?

  Have you installed another 3rd pilot who is not on the page of Toshiba? In particular, I mean the display driver.
  In addition, you should try to reinstall Windows using the Toshiba recovery disc.

  But I think that in this case, you need professional assistance from an authorized service provider. Technicians can looking for laptop and fix because this should not happen. Moreover, on the Toshiba site, you can search for the nearest authorized service provider.

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)

• Satellite Pro M70 freezes everytime when the USB port is used

  Satellite Pro M70 (SPM76) crashes every time when the USB port is used.
  The mouse works, but external HD/Extarnal card sound/Memory stick causing the laptop to freeze. All the drivers are installed right, they are the most recent and have no trouble with other users.

  The devices are all compatible. Service pack 2 is installed, and all the hardware drivers on the toshiba have been updated... again, same problem.
  The toshiba is about 2 months old and have had this problem since I got it. First I thought it was the drvers, but I cleared of all (?) other options but the USB ports.

  Hello

  Believe me, that's not easy to say what the problem may be. It is important to see if the problem occurs because of hardware or software may be. I recommend you to backup all your data and reinstall the unit using rescue media. On this way the unit will be factory settings and will be clean preinstalled. Test your USB devices and see what happens.

  Try to use some standard like USB stick or external HARD disk parts, because in this case, you must not install any drivers please. If you use other devices like USB webcam with own software and drivers, it is possible that something goes wrong, but what. On this path, it is not possible to say.

• Satellite Pro A60: error code 11030 - invalid destination drive

  I have a satellite pro a60 and it won't let me do anything I have an error message 11030, - drive destination not valid. can someone please help me solve this! regards Jean

  Hello

  I read that this error can appear after using the Symantec ghost.
  Have you used this program?

  Try using the chkdsk command or try to run the error checking that you can find in the properties of the HARD drive.

• Satellite Pro M10: Can I use burner DVD SD-R6472?

  I have a Satellite Pro M10 GR / / model PS630E-G207W-GR. I want to put in a DVD burner. Can I use the slimline burner DVD SD - 6472 R Toshiba?

  Thanks for the quick reply

  Herbert

  Hello

  Unfortunately I have not found any information that would confirm that this drive is compatible.
  But I found this Slim SelectBay DVD Multi drive: PA3231E-1DV1

  This site of Toshiba products:
  e http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = 1 = us & selSeries & selFamily = 2327 & SelCategorie = 2319 & family = 2327 & product = 69238 selP

  However, if you want to order that a 100% compatible and taken in charge by car then please request the Toshiba service in your country. There, you can order the CD.