Everyday same updates - KB2656369 and KB2686828

Similar Questions

• Updates KB2656369 and KB2686828 offered several times.

  Original title: reminder of the automatic updates icon will not die

  Although installed several times, ID = 237398 Windows automatic updates continues to reappear.

  The update includes: KB2656369 and KB2686828.

  Installation of two updates was confirmed by their appearance in the Panel of configuration/Add / Remove programs.

  How to kill the recall of the Automatic Update icon?

  Hello

  Perform the steps mentioned below and check if that helps:

  Method 1:

  You can view the history of update for updates failed and error codes.

  a. click Start, all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, clickview update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  c. double-click the updates failed to check the error codes.

  Method 2:

  Troubleshooting in Windows XP MS-DOS-based programs

  http://support.Microsoft.com/kb/314106

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  I hope this helps.

• I get updates for KB2604092, KB2656369 and KB2686828.

  I get updates for KB2604092, KB2656369 and KB2686828.

  I ran set the of http://support.microsoft.com/kb/910339 which erases, but he's back on my PC in 10 minutes by running. The patch program has been run 6 times on different days now. How to clean and make it stick?

  Thank you, but it did not work. It is said in my update of Windows patches updated on my pc, then term - %windir% option that aren't located KB numbers.

  I wonder if it would be better to remove the .NET Framework 2.0, because it is rearely used. This should then stop updates (I said if all goes well)

  Did you read the article and determine if the update has been installed?

  And if you did, did you follow the troubleshooting recommended methods?

  If the fixit does not work, then read the article for other troubleshooting methods.

  Repost-

  If the fixit does not work, read the article and watch each troubleshooting method.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

  So the first part was the fixit - who did not

  then in the article.

  Determine whether the update has been installed

  How to solve the problem if the update has not been installed.

  How to solve the problem if the update has been installed"

  Repost of end

  More information-

  You can use this to check what versions are actually installed on your computer:

  The user guide for the .NET framework installation check tool
  http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  You can try the applicable repair just only the .NET Framework versions affected - http://support.microsoft.com/kb/976982

  Benefits of Microsoft .NET Framework
  http://support.Microsoft.com/kb/829019

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785
  This article explains how to determine what versions of Microsoft .NET Framework installed on your computer.

• Windows Update continues to install the same update over and over again

  Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to Microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. Update for Microsoft security update

  .NET framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708) (update 1 of 1)...

  Hello

  I had exactly the same problem and it resolved the response in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/security-update-for-microsoft-net-framework-4/f7c1fbbb-8c66-e011-8dfc-68b599b31bf5

  Why don't give you it a try?

  I hope that helps!

• PS keeps items 13 asking same update, again and again and again...

  Recently, I moved all my data including PS 13 elements to a new iMac. I used PSE 13 several times since then, but this morning, he asked an update to install. I let it install. But as soon as it was installed, he asked again. And once again. And once again. I can no longer use the app because it just keeps asking for an update. But once that is done, ask again. I tried all PSE 13 remove it from my computer and reinstall. But as soon as I had reinstalled it, he asked her the same update again and continued with the same process. So, right now, the app is useless. If uninstall and re - download and reinstall doesn't work, then what?

  Exit the whole Adobe activity monitor and navigate to the location below and rename the folder 1.0 1.0_old.

  / Users / [username] / Library/Application Support/Adobe/AAMUpdater /.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Windows Update keeps trying to install KB2656369 and KB2686828 over and over again

  My setting has been changed, the windows update has been downloaded and installed automatically. Now I have to turn off the computer for installation

  I continue to install both patches repeaedly: a security update for Microsoft Net Framework 2.0 on Windows Server 2003 and Windows X x 86 (KB2656369) and

  Updated security for Microsoft Net Framework 2.0 on Windows Server 2003 and Windows X 86 x (KB2686828))

  My setting has been changed, the windows update has been downloaded and installed automatically...

  If you mean the new V7.6.7600.256 WUA installed himself past week... you can change your settings to again to your panel of control-online Start > Control Panel > automatic updates.

  Regarding the .NET - repeat-... updates just hide them (don't show this update again) in WU, delete them (if they are already listed as installed), and then download and install manually.

  Or if not try > http://support.microsoft.com/kb/910339

  Confidence in assistance.

• with MS XP, when I shut down the computer, try to download the same update again and again!

  and I don't know how to find the updated info?  Help!  It takes 5-10 minutes every time I have shut down the computer.  How to cancel this update which blocks my crt?

  Thank you!

  Julie

  Hi jjackbcop,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with windows updates offer several times over and over again.

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow these steps to configure Windows to use a Normal startup of the link report section to return the computer to a Normal startup mode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2:

  I suggest you send the link and check (this also applies to windows XP).

  Windows Update or Microsoft Update repeatedly offers the same update

  https://support.Microsoft.com/kb/910339

• Windows Update keep repeating the same updates KB2676562 and KB270511

  Original title: update for Windows XP (KB270511) security will not stop asking an installation!

  Update for Windows XP (KB2676562) security and update for Windows XP (KB270511) security won't stop asking Installation, even after several installs!

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  I suggest you perform the steps mentioned in the link and checking.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  You can run the automated FIXIT and check if this may help; If it isn't then you can perform other manual steps mentioned in the link.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also check:

  MS12-034: Description of the update of security for Windows kernel-mode drivers: 8 may 2012

  http://support.Microsoft.com/kb/2676562

  Hope this helps and keep us informed if you need help.

• Why am I getting the same update again and again and again

  Why you continue to send me updates to install internet exp 9 when I have already installed and that you sent me the same update 8 times so far

  Hello

  It's not Microsoft '

  These are public forums, only led by Microsoft

  You can right click on the IE9 update - UAC prompt - hide

• Creative Office Cloud | Apply the same updates, over and over again.

  My CC application apply the same updates to 6 products almost every day.  Even updates, same version number, exactly the same level of detail.  I'm not one missing a revision.01 - they are all the same.

  OS X Mavericks.  Applied last CC Office today.  Same question.

  I really don't want to uninstall and reinstall the applications and plugins.  Such things should work the box 50 PCM.

  Please notify.

  Hi QCM UK,

  Please try the mentioned below as follows:

  1. navigate to ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.

  Allow the user library: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.

  2. activate the root account and place you ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.

  Enable the root account: http://support.apple.com/kb/PH14281.

  Launch desktop CC and let me know if still the same issue.

  Kind regards

  Romit Sinha

• Windows Vista keeps wanting to install the same update again and again. This is the Internet Explorer 8 for Windows Vista for x 64-based systems update.

  This update keeps coming back even if it has been installed at least 15 times. Does anyone know why it keeps doing what/how stop?

  This problem may occur because of corrupted content of the Software Distribution folder.

  Rename the software file Distribution try to access the Windows Update site again.

  How to rename the software D folder in Vista - distribution agent version

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Reboot - without having to restart, the new folder could not be created successfully.

  TaurArian [MVP] 2005-2010 - Update Services

• Update Windows guard installation same updates KB2604092 and KB2656369

  Windows Update keeps offering to install updates of security for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092 and KB2656369 respectively) I made several attempts to install and also ran Fixit, but on reboot, the update screen appears again. The same solutions offered for similar updates but other NET framework 2.0 would work in these cases?

  Hello

  1. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/910339

  For issues related to Windows Server 2003, I suggest you to ask your question in the below mentioned link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• my computer guard offered the same updates again and again even if they have installed correctly

  Updates three same keep installation how can I stop this

  Hello

  I suggest you follow the link and check.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

• Computer tries to install the same update again and again...

  I have a HP Pavilion dv6-1375dx Entertainment PC

  Running Windows 7

  My computer keeps trying to install the following service patches.  Patches have been installed on several dates, sometimes status is "failed" sometimes it "Successful".  When I check the history of updates for the first installation, he managed 9 installed 17 times in vain.   This isn't the only element is installed or tried to install several times.  And when it tries to install it takes more than 12 hours to do.  I logoff around 22:00 at night and leave the installation of the computer, when I get up in the morning, it is still installed, when I get home from work it has completed the process.  Sometimes it was successful and other times, it wasn't.

  The last time that both of these updates is held, they have "failed".  Can someone please.  This has happened since June, but I was not able to take the computer to the store because I use it for work.

  Update of security for sql server 2008 service pack 2 (kb2494089)

  A security update for Microsoft Visual Studio 2008 Service Pack 1 XML Editor (KB2251487)

  Thanks for all the help.  I continued to watch, and I found the same question when I google mine.

  I had to uninstall the updates, go to microsoft and manually download and re-install update and that worked.

  I did the same for the two updates, and it seems that my problem was finally resolved.

  Thanks again!

• Windows repeatly install the same update again and again. KB2478663 & KB2518870 updates.

  Went to Windows Update. Click on it to see if I needed updates. Watch the updates I had need which has been KB2478663 and KB2518870 ranked high priority. Click on it to install it. Icon came after I thought they had installed. Restarted. Now, the icon will not go away and when I go to Windows Update it tells me that they are waiting to be installed. When I review the updates, it shows that they have been installed at about 14 or 15 times. He said that they should appear in the Panel configuration-adding and removal. They do not appear here.  What is the Solution for Windows XP?

  Hello

  You can try the steps listed in the link below and check if it helps: how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339