Satellite Pro P100: Brands on the palmrest

Similar Questions

• Satellite Pro P100: What is the part number for Toshiba for a 2 GB memory module

  Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.

  What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421

  Gives memory crucial me this module - is that correct?
  http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304

  Found, via the Kingstons site - is this okay?
  http://www.dabs.com/ProductView.aspx?QuickLinx=4P3V

  Would be really grateful for official clarification here.

  Thank you very much

  It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.

  In any case I recommend to buy products of high quality like Kingston modules.

• Satellite Pro P100 (PSPAEA) and the 64-bit virtualization

  Hi all

  I hope that someone tried to do this before and has an answer.

  I am currently running Windows Vista (32 bit) on my P100 with the last BIOS V4.40 (also 32 Bit Version). I am trying to install a Windows XP 64 Bit Virtual Machine using VMWare Workstation. However it is said that even if my hardware is capable VT I need enable VT via my BIOS support. Of course there is no setting that I can find in the BIOS. I need to install the 64-bit BIOS? Or is there something that I am missing? Or is it simply not really able to do what I want?

  Thank you very much

  Hello

  If you say; + your hardware is capable VT + do you mean the CPU?

  What CPU do you have?

  I ask because the VT (virtual technology) is not supported by all Intel processors!

  Then please post some details about your CPU!

• Can I increase the memory on my old Satellite Pro P100?

  I have a Satellite Pro P100 (P6PA4E-002001EN) with only 512 MB of memory and the desire to know if it can be increased and if so what memory should I buy and it is easy to open the machine and adapt?

  Hello

  You can increase the memory on this laptop amazing plu of 4 GB of RAM.

  RAM modules compatible that you can use to upgrade:
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit)

  Check the underside of your laptop and there should be probably set with a cover of Ram screw. Remove it and you will have access to the memory locations.

• How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)

  I have just flashed the BIOS on my Satellite Pro P100 4.8.

  The CPU runs at 100%. (90% + for windows explore)

  Only a single core is recognized by my Vista gadget.

  85 CPU temperature

  How can I "downgrade" the BIOS? Where are the older versions?

  When the new BIOS version is available to download older versions are not available more.
  What Satellite Pro P100 you exactly (model name, model number)?

• Satellite Pro P100: losing picture on external monitor when using the DVI - D connection

  Guys,

  I have a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), recently I bought a DVI - D cable to link them together.

  Now the problem is that when I connected to 1400 x 900 LCD TV screen goes to a black screen several times (usually when there is a lot of activity or I'm resizing windows to the maximum to the minimum).

  Now, I would have thought it would be the LCD TV doesn't do not signal or refresh rate however I connected using a VGA cable and its fine - no problem just no matter how much I minimize my windows or put a lot of activity on the screen. To complicate matters even more, when I run the screens in "Dual screen" mode instead of "Clone" if I put one of them 1400 x 900 to 59hz in 16 bit it works fine...?

  Can someone help please that it made my head that I can't understand what the hell is the cause!

  I've included a list below all the different resolutions / screen modes I tried it and the result.

  Thanks for your time & help.

  Concerning

  Craig.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - constantly flashing black screen
  60 Hz - constantly flashing black screen
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 32-bit color) using 3 m DVI
  59Hz - screen flashes black only when resizing windows
  60 Hz - screen flashes black only when resizing windows
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - no option
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 16-bit colors) using 3 m DVI
  59Hz - works great
  60 Hz - very rarely flashes black when resizing.
  75 Hz - intermitantly flashes black when resizing.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 on Samsung 940MW Toshiba set to dual screen (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  Hello

  I hope that you have enabled user s manual supplied with your device. On page 148, you will find a very interesting picture on the supported display resolution.

  I have to be honest with you and say that I am no expert DVI because my LCD doesn't have this port, just HDMI but if I have understood you as soon as you have problem with a resolution of 1440 x 900 only. This resolution is not listed as supported, and I presume that it is not unusual to have a problem.

  Sorry, but I think that you should use maximum supported only resolution 1280 x 1024.

• Satellite Pro P100: The extended warranty is not available?

  Hi, just about to buy a Satellite Pro P100, but when we look at the warranty I don't see this pattern on the list machines covered by the extended warranty available at Toshiba.

  Any ideas?

  It makes me a little nervous if Toshiba does not cover this model for extended warranty.

  Hello

  Did you mean Satellite Pro P100 or Satellite P100-xxx?
  I asked it because I don t find any laptops Satellite Pro P100 on the Toshiba site. Only Satellite P100-xxx are available and these books are very new. Maybe you checked the list of bad guaranteed?

  PS: I can t believe that the extended warranty is not available on this device.

• How do I reset the fan on Satellite Pro P100 control?

  Hello

  My PSPAEE - 00E006EN Satellite Pro P100 turned on his car in his carrying case the other day.
  He got very, very hot. Now on the side fan runs all the time but otherwise his work as usual.

  An easy way to restore control of the fan? TKS.

  Hello

  There is no function that could restore the cooling modules.
  I guess that your laptop was put in standby or in hibernation mode and somehow, she woke from sleep or hibernation mode

  You stop simply laptop (windows start-> closed) and then should power the unit.

  Just FYI; You can change some settings of cooling modules in the Vista power management.
  To do this, see this FAQ:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

• Official release of the drivers XP and Vista for Satellite Pro P100 - 465 PSPAEE

  When will it be available for XP and Vista for the PSPAEE drivers? Currently there are drivers for the PSPA4E, some of whom work, others do not, no operating system. Yes the laptop is preinstalled with the Vista Upgrade and pilots work, but two of the pilot applications are blocked by Defender (NDSTRay / ConfigFree and VolControl). I couldn't get no option to allow to these (not yet classified MS so they are locked) told me to disable Defender technical support!
  I tried a clean install of my own version of Vista business and had problems of drivers with that as well.

  I would like to run XP until Vista is, shall we say, more effective I would use drivers specifically for her, so time would be very useful.

  I would also like to know why there is a where a finger scanner could go under the 0 on the keypad, and a blocked stop lower PCMCIA port (PCI-E?) when any of these are available as an upgrade option? I missed these upgrade options or is it a case of recycled from another model, they exist? If the latter then it is quite cheap for a new machine :)

  Hello

  We have all the users here can suggest only it seems that Vista and XP drivers are already available for Satellite Pro P100 PSPA4E
  So in my opinion the next drivers for the next series should follow in the near future

  I don t see it differently as to wait

  Of course, you can test different drivers from different series as Sat P100.
  Many laptop models use the same devices and therefore different unique pilots could be compatible

• Satellite Pro P100-438: how to disable the CapsLock NumLock or Scroll sounds

  Hi out there,.

  How can I disable these "ugly" notification sounds when I press CapsLock NumLock or Scroll?

  It's a Satellite Pro P100-438. Does anyone have any suggestions?

  Thank you

  It's pretty easy mate.

  Follow these steps:

  -Keep right SHIFT> key for about 10 seconds.
  A messagebox will appear (FilterKeys settings) and offer a menu:
  -Click the [settings] button and a new window will appear.
  - Remove the tag [x] of [Use ToggleKeys].
  -Click [OK] to save your changes
  You're done :)

• Activation of keypad on the Satellite Pro P100

  I just got my laptop new Satellite pro P100 and cannot find how to set the number pad (integrated) to be enabled at power on.
  I checked in the Setup, the Toshiba HW setup... nothing

  Does anyone have an idea?

  Thanking you in advance

  Please correct me if I'm wrong, but there is no sense for me to have 'num-lock' enabled at startup on all laptops.
  As you know, all the keys the keypad uses are shared with the regular alpha keys. In order to avoid interpretation of the wrong password (on a reduced keyboard set), the "Numlock at startup" function has not been implemented in most (all?) notebook BIOS.

  You can hold the key while you tap on the "blue pad", but that's all you can get without activate "num lock" with the +.

  If you have an attached external keyboard, very probably the num-lock on the extra cushion will be "on" by default. Otherwise, if you do a lot of the use of the numbers, you can get a num - pad usb to your laptop. There are quite expensive "toshiba-made" on e - bay ;)

  Concerning

  chain

• Satellite Pro P100 - replacing the HARD drive internal

  I have a Satellite Pro P100 with a concert of 60 internal HDD and would like to replace this with a 250 or 320 GB drive.

  Anyone can suggest a way to imagery of the current drive and copy this back to the new drive without having to re - install the operating system and other installed software?

  I have a couple of USB 2.0 external drives with sufficient capacity.

  Hello

  You first need to know if the more drive HARD 250 GB or 320 GB would be compatible and if the BIOS recognize this HARD drive without major worries!
  The problem is that not all HARD drive sizes are supported by the BIOS.
  Then all first check if the new HARD drive are supported!

  You ask how to get all the files on the new disk? I recommend good reinstall the OS from the recovery CD. It would be to reinstall the OS, drivers, tools, utilities.
  If you have other files such as mp3, etc it then backup to the external USB HDD.
  Then you could connect this HARD drive to the laptop and could transfer it on the internal HARD disk.

  Greetings

• Question about the new Satellite Pro P100 PSPAHE HARD drive

  Hello

  Can someone tell me, if I can use this drive in my notebook? The original is just too slow.

  Seagate Momentus 7200.2 2.5 "SATA 8 MB hard 100GB (ST9100821AS)

  It's a sata-II drive. The laptop will not work with sata-I accelerates, but it will be even faster.
  I know 3.5 "are compatible. What drives 2.5 "?
  The thickness of the disc is going to be ok?

  Thanks in advance,
  Martin

  Hello Ariane

  What model of laptop do you have exactly? Is your laptop Satellite Pro P100?

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• Satellite Pro P100: Where can I find the software pre-installed?

  Hi all, today I got my satellite pro p100-327. From what I read in the manual of the recovery cd provided is just a copy of windows? If I want to reinstall windows where all programs preinstalled on your laptop can be reinstalled from? Is it possible to make a bootdisk as such?
  Thanks for all the help.

  I'll try to bring light on this case
  The Toshiba Recovery CD contains an OEM version of the Windows XP operating system and all Toshiba drivers, tools and utilities are part of this CD.
  Simply said, after using the Toshiba Recovery CD, you get the laptop with the factory settings.

  If you only need drivers Toshiba or tools, you can create a CD of tools & utilities own.
  This option is found in the Toshiba support--> Protect Fix & -> Create sub drivers & Tools CD

  All the drivers are also placed on the page of the Toshiba driver