Satellite Pro P300 - no recorded on Skype voice

Similar Questions

• Satellite Pro P300 has NO stereo Mix in Vista with Realtek sound card

  Hello.

  I have a P300 with Realtek internal sound card and drivers updated.
  I NEED a stereo mixer in the recording devices, but I currently get only a MIC input, even after checking "Show offline and disabled devices."

  Yes, I updated the drivers HD Audio of this site Web and Realtek and still nothing.
  The only other thing that could affect this, but I don't see how I use ASIO4ALL drivers audio in conjunction with the Realtek drivers.

  I'm running Vista 32 bit Edition Home Premium

  your

  Hi mate

  I confused m do you know why?
  Because you talk about audio driver Realtek and sound chip and my knowledge, that the Satellite Pro P300 was equipped with the audio chip Conexant!

  It s NOT the Realtek chip! It s Conexant!

  According my Conexant audio chip experience can't stand stereo mixer in the recording devices!

  Good bye

• Satellite Pro P300-25W - noise fan too heavy

  Hello

  I just got my Satellite Pro P300-25W and I hate the noise of the fan. Is there a way to make it less noisy race less often?
  I updated to Windows 7 and installed the drivers from the Toshiba DVD.

  In power options I selected everything to be optimized battery / record maximum power in the advanced power settings. But still, the fan runs almost all the time. I use Windows to surf a little, the CPU usage is very low (less than 10%), there is no 3D graphics movies or something goes on that would put fun on the GPU.

  It drives me crazy.
  I can do something, or should I just bought a laptop?

  I hope you can help!

  > Is it possible to make it less noisy race less often?

  There is an extra entry called Toshiba Power Saving and there you can change the performance of cooling module for battery or power mode.
  Usually, this should help

  But note; It depends on the internal temperature! Higher temperature means more rapid cooling modules
  It might be also possible that your cooling fans are full of dust and debris and prevents air circulation, remove dust and clean the fan using a jet of compressed air. Who helped in my case

• Satellite Pro P300 (PSPC5E) - driver Webcam open fail on Windows 7

  I installed the RC of Windows 7 64 bit on my Satellite Pro P300 PSPC5E and I have problems with the configuration of my webcam and microphone.

  I tried to install the Wizard software for the camera, 64-bit (windows vista) to configure the webcam but I get an error message with "Webcam driver open fail. Restart camera or computer.' nor a camera photo or computer restart the job. I get the image in Skype, but I can't change the settings or so (dark) and the microphone is much quieter, so it was on windows XP, it is set to its maximum.

  Is there a solution for this problem? I hope so :)

  Hello

  I think there is no solution for this problem at the moment, because you are using a Release Candidate of Windows 7 and at the moment there is no official driver for Windows 7.

  Have you tried the driver of Windows Vista so that s what you can do. Alternative visit you the Toshiba us page (http://www.csd.toshiba.com) and search for driver of Windows 7 beta. Maybe it works.

  Good luck! :)

• Cannot install recovery image on satellite Pro P300-1EX

  Hello.

  I have never had many problems with a single laptop in my lifetime of work. I'm almost ready to throw this thing out the window. I have a satellite pro p300-1EX.

  I wanted to do an install new os just to make things a bit faster for the customer, it was 8 hours ago.

  First, I installed a Home Windows OEM pre 32B version. Then I saw that the CD would not work.

  So, Okay - I'll bring back factory default:

  (1) there is no link repair starting and pressing F8
  (2) there is no HARD drive untilty when you press 0 - that does nothing
  (3) there is no recovery console, by putting in an OEM version of windows vista
  (4) I try to download recovery disk creator bloody software and get this - it does not work. It creates a shortcut to a file that's not here yet. TRDCLcher.exe, can you, im speechless.

  So now, I have to spend £30 of my own money by obtaining a disc sent to me? I don't think so.

  So, what can I please? It was a horrible experience. Nothing works. The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it. Instealing the OEM deleted all tools by default, but I can't NOT THE DOWNLOAD.

  Please, please help me.

  Thank you.

  Hello

  Maybe it sounds stupid now, but this is simply.

  Here's my explanation of how it works:
  Almost 4 or 5 years Toshiba offers laptops without recovery DVD but with recovery image stored on the HARD drive. As much I know about former Satellite/Satellite Pro P300 recovery image was recorded on the second partition of HARD drive in the folder named HDDRecvery. This model laptop was shipped with Windows Vista.

  As you know original recovery image can be installed n in two ways:
  -You can use the recovery HARD drive installation method - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  -You can use the created recovery DVD disk

  HARD drive recovery facility can be made if the laptop has only factory settings. In this case in advanced startup options (F8), you will have the option to fix my computer. If the notebk has been installed with the version of the OS or any other operating system of this option won't be available more. Because of this Toshiba has preinstalled reminder with the message for owners of laptops create recovery DVDs.

  Your questions:
  > There is no link repair starting and pressing F8
  If this laptop doesn t have to factory settings it will not appear in the advanced startup options
  > There is no HARD drive untilty when you press 0 - that does nothing
  If you have European book this model with zero will not work. It only works with the United States and Austraian mobile.
  > There is no recovery console, by putting in an OEM version of windows vista
  I put t understand it. What happens when you start with the OEM version?
  > I am trying to download bloody recovery disc creator software
  If you have the European model of laptop, it can not be downloaded. This piece of software is included in the recovery image only.

  > So now I have to spend £30 of my own money by obtaining a disc sent to me
  I understand, but at least with the original recovery DVD you can install OS and all necessary things in an hour only.
  > The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it.
  Yes. Without factory settings you will not have access to these data.

  Follow these steps:
  -start your laptop and press F2 to enter the BIOS settings
  -set the BIOS to default settings and reboot the laptop
  -When the laptop reboots press F12 to get into the boot meny
  -When the boot menu appears on the screen put the original DVD of recovery in ODD
  -Choose the CD/DVD drive on the list and press ENTER
  This will force it's STRANGE to be the first boot device and you should see process on the loading screen. Click next or OK nothing change and wait for the recovery procedure starts.

  Please try it and let me know exactly what is happening.

• Re: My Satellite Pro P300-19 q there Firewire 400mbps, 800 or 1600?

  Which firewire connection my Satellite Pro P300-19 q did?
  I hope that this goes up to 800mbps (IEEE 1394 b) so I can use a powerful Firewire Soundcard for Audio recording of high quality.

  The only specs State he has IEEE 1394, but not the State is there, B, C or D

  IEEE 1394 - Firewire 400

  * Speed: 400Mbps
  * Cable length: 4.5 m

  IEEE 1394b - Firewire 800

  * Flow rate: 800Mbps
  * Maximum cable length: 100 m

  IEEE 1394b - Firewire 1600

  * Flow rate: 1600Mbps

  IEEE 1394b - Firewire 3200

  * Flow rate: 3200Mbps

  Hello

  I don't have any idea what firewire port is, but you should be able to know the installation details of material diagnostics such as SiSoft Sandra or Everest Home Edition.

  These tools, one for free and will help you diagnose the hardware.

  Welcome them

• Satellite Pro P300 - BIOS upgrade to 64 - bit

  Hello

  I have a Satellite Pro P300 - 266 PSPCDE and I am very happy with him.

  Since I have a WIN7 64 bit OS, ready to use and 8 GB of RAM I need to update the BIOS to 64-bit.

  I found a WinPhlash file on the support site of Toshiba (toshiba - tro.de) bios called - 20090226124829.zip. I tried to use it as described in the Toshiba support on the use of WinPhlash (http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm) page. Also, I made an exception for WinPhlash in the registry of the DEP.

  It still does not work.

  Since I am a user knowing very mediocre modern computers I guess I'm doing something wrong or I can be monitor something... can anyone please help me upgrade my system to its full capabilities?

  Thank you

  Aernout

  You don't need to upgrade BIOS. If everything works well don t change anything.
  I have Satellite P300 with preinstalled Win7 32 bit and works perfectly.

  How do your shopping with the 64-bit version?

• Satellite Pro P300 always try to boot first from CD/DVD

  Hello world

  I have a problem with my laptop Satellite pro p300 PSPCDE: my OS is on my HARD drive (hdd1 with a ssd and hhd 2 is empty).
  In the bios on the boot sequence, I have just put (my ssd) first HDD1, HDD2 (which is empty), then drive diskette, then LAN and cd/DVD, but when I start it, it always try first to read the cd/DVD (with the horrible sound of the cv/dvd when it tries to start on it) and finally it starts on the HARD drive.

  Why is he trying to boot from the cd/DVD? I don't understand, my bios version is 3.4.
  I am now on W10 x 64 pro, but the problem was the same with win 7 pro.

  Help me please!

  No one to help me?

• 2nd HDD on Satellite Pro P300

  Hi all can anyone tell please how to add a 2nd HDD satellite pro p300-180, given that a space inside

  Remove the cover for the second HARD drive and check if there is the HARD drive connector. If so you can put there second HARD drive. I did the same thing on my old P300.

• What RAM is compatible with Satellite Pro P300?

  Hello

  I have the Satellite Pro P300 (PSPC1E - 002002GR).
  What are the specifications of the RAM?

  Currently, there are 2 GB of RAM
  I want 4 or 8 GB of RAM.

  I have this possible?

  Greetings

  You can upgrade the RAM to 4 GB of RAM
  So you can use additional DDR2 667 MHz 2 GB RAM module (i.e. PA3513U-1M2G).

  Specifications are:
  DDR2 SODIMM 667 Mhz PC2-5300
  Pins: SODIMM 200
  Voltage: 1, 8V

• Occasional Satellite Pro P300-1FP - gel during video playback

  Hello forum,.

  I have a laptop Toshiba Satellite Pro P300-1FP, age about 4 years old.

  Running Windows 7 (32-bit version).

  An occasional but annoying problem: when playing video, from time to time the whole system freezes. Sound continues to come from the speakers, but it is usually either an idle down & distorted version of what I should be heard, or a noise buzzing/scream loud, repetitive.

  System retrieves ever - only freezes completely, unresponsive, frozen display, the mouse pointer moves, etc.. Have to restart every time.

  Anyone know what could be the cause of this & how can I fix this?

  Thank you
  Alan.

  As far as I know SP P300 works well with Win7 32 bit. My brother has the same machine and use it with Win7 too. We checked often performance with different games or playing different videos, mostly from avi or mpeg files. Also very good race and YouTube videos smoothly, so I really don t understand why you have this problem of gel.

  Have you installed the Toshiba download page display driver?
  HARD drive is extremely busy before that happens?

  The same thing happens when you play games?

• Satellite Pro P300 - 23L - horizontal lines on the taskbar

  I have a portable Satellite Pro P300 - 23L.
  Last night it suddenly appeared, about 30 horizontal thin white lines on the taskbar (actually on the bottom half inch of the screen).
  The top 3 or 4 of these lines seem to pulse in a fast and regular way.

  Now, I can barely see the icons in the taskbar, or the button to start in the lower left corner.

  I read on another forum that the problem may be due to a problem of "grounding".
  The charger plug is actually broken and repaired the wiring myself, but that some time previously, so it is possible that a connection is loose or is now was something shorting causing this effect.

  I had to order a new charger but in the meantime would appreciate any assistance in order to confirm or deny that this could be the problem.

  Any advice on how to remedy this?

  Hello

  If the problem would be with the power adapter this lines should NOT be visible using the laptop with the battery. Right?
  Therefore, it would be really interesting to know if the same lines are visible if the AC adapter is not plugged in.

  But I think that this is unrelated to the power adapter. In my opinion its a display issue or a graphics card problem.
  Therefore, you must connect an external monitor to check it out.
  If the same lines are visible on the external monitor, the graphics chip is assigned the case, it could be a display problem.

• Satellite Pro P300 best exit way to get audio for blu - ray player or projector

  Hello

  Would be great if someone has experience on the following points.

  I have a Satellite Pro P300 - PSPCDA 03 P00D: I would like to know the best option for high-quality audio from this unit to a blu - ray player or an optoma projector. (Or a good way to find the answer)

  The blu - ray player has hdmi (the satellite does not work) and the optoma projector has a 3.5 mm mini-plug.

  The satellite has a sound piece dolby - is it possible to get a feed for audio output dolby?

  Any thought / experience welcome.

  Thanks in advance!

  Hello

  Not sure but I think that the headphone socket supports S/PDIF
  I think you should check the user manual for more information on S/PDIF
  If his support, then you can use it to get the best audio quality

  Also found this doc in the knowledge base of Toshiba
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm

• Satellite Pro P300-1bd - no parts sound dolby after recovery

  Hello

  I bougt garage a toshiba satellite pro P300-1bd. With this laptop, it has Dolby sound piece on the pc.

  I installed my P300-1bd with the recovery with XP disc. I've updated the pc with windows vista Enterprise edition.

  Before installing, I had an excellent sound quality, with a good bass.

  Now after you recorey, the sound is very bad.

  I installed the drivers for the card's audio fr.
  But, what should I do to get my good his return.
  I can't find sound on the internet room so that I can install it. But I don't know if that's the problem.

  Can anyone help me to get my perfect his return.

  Thank you in advance.

  Post edited by: melina

  Hello

  The European driver Toshiba page provides two audio Conexant drivers for this model of laptop.
  + Driver sound + 4.36.10.0
  + Driver sound + 4.83.1.0

  I recommend the new version 4.83.1.0
  Uninstall the old driver first in the Device Manager.

  Restart the device and install the new downloaded drivers.

  Hope this helps to get better sound quality :)

• Satellite Pro P300 BIOS not only flash through recovery CD en

  Hi people

  I tried to update my BIOS on my laptop Satellite pro P300 series, and it seems to have gone wrong. I have now read a lot about the winphlash version goes wrong. I managed to create a recovery CD, and it starts the procedure of flash and works almost to the end, but then shuts down and restarts. I have no idea how to solve this problem. I don't know that I have the correct procedure and BIOS recovery. I can boot my laptop with Ubuntu, but I really don't want to get rid of my windows installation.

  Any help would be appreciated.

  Concerning

  Etienne

  Hello

  Have you tried to Flash the BIOS in the Windows operating system?

  The BIOS is focused on victory and you can Flash the ROM module using the version of the BIOS based win.

  This, to a Windows operating system installed.

  Found a doc HowTo very interesting on the update of the BIOS.

  http://APS2.toshiba-tro.de/KB0/HTD9502M10000R01.htm