Satellite Pro S300 - 11 H - upgrade to Windows 7 is not

Similar Questions

• Satellite Pro A120 - can I upgrade to Windows 7?

  I have a Satellite Pro A120 (model PSAC1A-045005 - purchased in Australia) I want to upgrade to Windows 7, XP
  The Toshiba Australia website says it is not compatible with Windows 7 and the Windows XP upgrade to Windows 7 is not supported.
  Searching the Web I found some sites that say they have the drivers on the computer. Only one address is the following:
  http://driver-Toshiba.blogspot.com/2009/12/Toshiba-Satellite-Pro-A120-PSAC1-for.html

  No doubt these drivers would be unofficial. They would be reliable or would it cause problems?
  I use a wireless router so would be particularly concerned if it caused problems with this

  To provide you with accurate answers, someone must have the same model of laptop and test it for you.
  To be honest, you will be very happy if someone here will do that for you.

  So my advice is: install Win7 and test these drivers only. If something is wrong or you will not be satisfied with the functionality, you can back up the operating system more former and supported when you want.

• Satellite Pro U400-12U - Vista upgrade to Windows 7 will work with Win XP

  I got my Vista upgrade to windows 7 a few weeks ago.

  As I had downgraded from Vista to XP - Pro, I wonder if this Vista upgrade to Windows 7 on my U400 - 12U now works under XP, or that I first must be reinstalled Vista?

  Hello

  You have the Toshiba preinstalled Windows Vista if you want to upgrade to Win 7.
  The Vista Win 7 upgrade does not work with pre-installed Win XP.

  Welcome them

• WLAN on Satellite Pro L770-12R after upgrade to Windows 10 has lost

  OK, first of all, I must admit that I know very little about computers so be gentle!

  I have some cleaning on my laptop and uninstall programs I didn't need. All of a sudden my WiFi stopped working and there is no wireless option when I try to connect to the internet, it shows just connect using a cable. I guess that means that I accidentally uninstalled some software required to connect to the wireless internet.

  How can I get it back? Thank you!

  Natalie

  Hi Natalie

  Can you please tell us which model of laptop and operating system do you use?

  Please open the Device Manager and check the first WLAN card status. Wireless network card must be listed and properly activated it. As an example, I send you a copy of my laptop screen.

  

• Satellite Pro S300 - 11 H: charging not not after re-installation of software

  My laptop has been "reset" by a Virus called AdwCleaner last week removal tool (CAUTION - do NOT run it on your laptop - if could ruin your life!)  :(

  In any case, the result of it was that I had to take it to a repair shop where they were unable to restore Windows XP I had used since I got the machine, and so they have had to re - install the original Windows Vista which was the OS when I bought it. (I bought a "downgrade" to XP disc with the laptop)

  Until that happened, the charging of the battery and everything worked well, but since I'll be back my laptop from the store, battery does not charge.

  When I hover over the right low battery icon, it says "3% available, battery not charging".
  The battery is OK, because if I unplug the power cable, the laptop stays on.

  Is there some setting somewhere that is revealing the machine do not recharge the battery?
  How can I get it back to normal?

  See you soon,.
  Select this option.

  Complete model: Satellite Pro S300 - 11H

  Post edited by: KasinoKing - typo in the title!

  Guess what?
  I m wondering if the guy installed all the drivers of Toshiba Vista that are released on the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?

  I m thinking in particular software and tools such as value added package

  I also recommend you to check the Device Manager.
  In Device Manager, expand battery area.
  Here, you must first uninstall the
  -Battery method to check compatible ACPI Microsoft
  -Microsoft AC adapter
  -Battery composite Microsoft

  Reboot the laptop.
  Check how to work the battery charging process
  In the case where they would find the new hardware (these would be three uninstalled devices from Device Manager) wait until the system has installed the driver, reboot once again and check the load

• Satellite Pro S300 - HDD in caddy is not recognized by BIOS

  I replaced the original HARD drive and installed a new SSD that works very well.
  Installed the W7Pro and all updates.

  I do not use my burner so I replaced the CD drive and installed a shopping cart with my old HDD to have more disk space.

  When I start my laptop, I see a message of ERROR of CD-ROM.
  In Device Manager the caddy and or the HARD drive is not displayed.

  I tried to change settings in the BIOS (according to Toshiba utility the latest version), but even in the Bios is no information about this SSD or HARD drive installed. (or the CD player when I re - install this drive again)

  What's not here? Do I need a BIOS updated allowing the 2nd HARD drive?
  Or if I forget a setting somewhere?

  NB in the BIOS HARD drive drive settingis according to ACPI, the list below it is referred to as IDE device.
  When I enter the BIOS IDE instead of ACPI, I still see the CD-ROM ERROR when starting and after this message, the screen is blue and no other activity.

  Relevant information from PC:
  Model name Satellite Pro S300
  Part number PSSB0E-02H00FDU
  Serial number: 88091121
  Version of the OS Microsoft Windows 7 Professional 6.1.7601 Service Pack 1
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo T5670 CPU 1.80 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 255,953,203,200 [bytes] 238.375 [GB]
  Capacity of the hard drive space free 200,118,833,152 [bytes] 186.375 [GB]

  IDE Device V4-CT256V4SSD2
  TEAC DV-W28S-RT FW version = 7.0 D

  > What is the problem here? Do I need a BIOS updated allowing the 2nd HARD drive?
  > Or if I forget a setting somewhere?

  To my knowledge, not all laptops support a 2nd HDD rather than the ODD (optical disc)

  Also, not all CD/DVD drives are compatible and could be used for all laptops.

  So agree with the user above and I think it's the problem of compatibility also.

• Satellite Pro S300 - how do I uninstall TrueSuite to install Win 7 Win 8

  I put my Toshiba Satellite Pro S300 from Windows 7 to Windows 8 at level and I am stuck at the point where I need to uninstall first TrueSuite Access Manager.

  It is not listed under programs and features, so I can't uninstall it from there.

  I downloaded util_tam_uninstall_TC00240000B.exe and run it without success.

  Any suggestions?

  > It does not appear in programs and features, so I can't uninstall it from there.

  I can't believe that if the utility is installed, it should appear in the box programs and features.
  On the other hand also the fingerprint driver is installed
  So, you can check if you need to uninstall the driver of the fingerprint of the Device Manager.

• Satellite Pro S300 - 120 PSSB0E: No 32-bit software Win 7 of fingerprints

  Hello.

  I have a Toshiba Satellite Pro S300-120 part number: PSSB0E-05D00UEN

  I just loaded Windows 7 32-bit, but as far as I see it, there is no software available for the fingerprint reader.

  Anyone know how I can get this working, or when it will be available?

  Thank you.

  Hello

  Try this:
  [Fingerprint Software v 1.0.2.27 for Win 7 32 bit | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 5379 & selSh ortMod = 1023 & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 3 & ID = 75547 & OS ID = 29 & driverLanguage = 42]

  I found it in the compartment of the driver Portege R700.

• Fully operational GPS on Satellite Pro S300 with F3507g card

  Hello

  Some good news. I have the GPS works entirely on the Toshiba Satellite Pro S300 with F3507g 3 G card. I think that the measures to make operational work on any Toshiba laptop with the same card.

  It requires new 3G Toshiba drivers for the card that exposes the COM7 GPS port, some trick with the COM port for the card out of the location data (this would have been done by a Toshiba application if they support the GPS), then it will work with any application that supports GPS.

  I used the land bridge to verify this works and this allows tracking on Google Earth, see [image here | http://img405.imageshack.us/img405/2262/earthbridgepd2.png] (note that I blanked my exact location because it locates my front door). This signal was achieved with the laptop near a window.

  What I plan to do is to make a small application to enable or disable the GPS receiver and will post some instructions on how to address all this, which is quite easy other cunning of Com port that I hope, I can make do with a small, free program.

  Concerning

  Phil

  Post edited by: Philip_l

  Hello Philip

  Thanks a lot for this thread. This is really interesting stuff and it will be interesting to have a little more and more to report about it. If you have time please do it for this wonderful community.

  I just hope that the moderator will pay attention to this subject and maybe offer you more space or even separate category for people like you.
  It will be great to have some sort of blogging here.

  In any case, respect for your work and I hope to learn more about these interesting topics.

  Good luck!

• How to enter the BIOS on my Satellite Pro S300 settings?

  Hello

  It may sound silly, but I'm trying to access the BIOS on my TOSHIBA Satellite Pro S300-EZ1511 menu and I can't, I searched for this on the manual but I couldn't find anything.

  I need to go there if I change the SATA to IDE settings so I can install windows XP system after I formatted the Vista.

  Thank you

  It should be in the manual somewhere.

  Turn on the laptop and hold the ESCAPE key. When it prompts you, and then press F1.

• Satellite Pro S300-ez2502 - sometimes touchpad stops resonding

  Hello

  I use Toshiba Satellite Pro S300-ez2502 with Windows Vista Business.
  Sometimes my touchpad doesn't work for a couple of seconds at least 1 time a day.
  It becomes a bit annoying, because the mouse pointer move by moving the finger on the touchpad.
  Can someone please suggest a solution? Hoping to hear from you soon.

  Thank you
  Adil

  Hello Adil

  Apply for solution is simply but it will be interesting to know when that will happen. Usually, if the mouse is frozen it can be because of a background activity or HARD drive busy.
  Have you noticed the HDD activity (HARD drive flashes) when this happen?

  I mean when you wrote sometimes that's not easy to say why this happens and what you can do about it.

• How can I do for recovery Satellite Pro S300

  Hello...

  I'm Frman of Kurdistan of Iraq

  Thank you for this forum to take all the outfit.
  I want to help me to recover my laptop.

  How can I make recovery my computer toshiba laptop satellite pro s300 with all the driver but I the depletion of my data in my laptop for recovery.
  Can you help me? send me data recovery.

  Thank you

  Hello

  I don't know if your knees supplied with hard drive recovery:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  You can also order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] price of Toshiba or get disk Windows Installer, all the drivers are available on [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

  Hello everyone!

  I face a problem after the upgrade of my TOSHIBA SATELLITE PRO C850-1EQ preinstalled version of windows 8 to 8.1.

  After installation windows ask the product key to activate windows 8.1, but I don't have this activation key.

  I called Microsoft (Greece), but could not help me and told me to call Toshiba (Greece).
  The man of Toshiba technical support told me to remind Microsoft!

  In addition, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before starting the process. Step # 7 says "don't forget your Windows password. You may need to enter after update. »

  Now, I'm back to Win 8.

  Is there a way to learn my activation key before installation of w8.1?
  I tried to find that the use of various tools, but nobody found the key.
  In addition, after 8.1 install, a message says:

  + Error code: 0xC004C003 +.
  + The activation server determined the specified product key has been blocked.

  I trust Toshiba and I want to use the latest version of w8.1.
  I'd be grateful if someone Toshiba technician could help me with this problem.

  John (from Greece)

  Hello

  > I'd be grateful if someone technician Toshiba could help me with this problem.
  It's community of users

  > Is it possible to learn my activation key before installation of w8.1?

  No, the preinstalled Windows 8 Toshiba is already activated and during the upgrade to 8.1 Win will not ask you to enter the serial key...

  Windows 8 is activated?

  Try this: create DVDs of Toshiba Recovery (or flash USB memory stick). Use the recovery media to recover the computer laptop back to factory settings. Update of the Windows 8 at the last State and then do the upgrade to 8.1 Win

• Satellite Pro S300 - 117 PSSB0E Bios Recovery disk?

  Hi I have a Satellite Pro S300-117 PSSB0E-04J00UEN, and it seems that the BIOS was damaged when turned on the power lite 2 flashes green and 2 orange

  I'm looking to be able to rewrite the BIOS using a usb floppy drive or usb key that emulates a floppy drive.

  The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

  I believe also that the press/hold button when you turn on the power is the one above the tab key but also saw other keys such as F, F, F12 FN and ~. If all the instructions would also be appreciated.

  Kind regards

  Chris G

  > The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

  I could find a BIOS for this series on the Toshiba driver page we
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2496404&PF=true

  Zipped package contains the based victory and based back the version of the BIOS.
  Unpack this package and read the readme.txt file

  There you can find the details of the update of the BIOS using the diskette

• Satellite Pro S300 - 10-fc06-0002 error recovery disc

  I have a Satellite Pro S300 the recovery partition has long been eliminated and the computer was working fine until I opened an e-mail allegedly Fed Ex, ERROR!

  A got a malware virus really bad.

  So I bought a vista business recovery disk for my computer and wiped hard drive t.He. During the installation of Vista, I get a preinst5.swm missing on the first disc.

  After that I skipped the file I got an error of 10-fc06-0002 on the second disc and a cancellation of the installation.
  I looked online for this error and a lot of people have had the same problem. Nobody seems to know what to do.

  I installed Vista Home Premium from a disk recovery Dell with no problems, however, when I tried to change the product key to that on the computer I got the key was not good for the version of hp vista.

  So what to do.
  I think Toshiba made a good product, but the recovery disk, they sent me for $30 was bad.

  I thought that I could copy the disc on another computer and copy a good version of preinst5.swm and try to make a good recovery disk, but I don't have a lot of confidence in Toshiba software.

  Help

  If you have a model of cell phone US please try to ask for help on Toshiba we forum http://forums.toshiba.com/t5/Computers/ct-p/c_laptops/tshb
  Maybe someone can help with this. To be honest, this error message is not known to me and the correct address for help should be closest to Toshiba service provider.
  Call them, explain the situation and ask for help.

  This error must be known to them and I hope they can give good advice you how to solve this problem.