Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

Similar Questions

• Update graphics on Satellite Pro C850-1EQ

  If I buy the Satellite Pro C850-1EQ with Intel HD Graphics 4000 - how easy/possible change is for a dedicated at a later date if graphics card I want better graphics performance?

  Thank you

  At first, I must say that it is not logical for me. If you want to have the laptop with good graphics performance buy new notebook with a powerful GPU inside.

  General GPU Exchange/upgrade is not supported and more info about what you read on http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
  Check it out.

• Satellite Pro C850-1EQ does support Sata III?

  I just got a new laptop Satellite Pro C850-1EQ and seeks to replace the slow drive 5400 RPM with an SSD.

  I can't find this machine anywhere - SATA specifications it supports Sata III (6 Gb/s)?

  Thank you

  Gareth

  Hello

  As far as I know, that it supports SATA II (3 Gb/s)
  But you could install some software like diagnostic tools * SiSoft SANDRA *.
  This would allow all of the details about the hardware configuration.

  Could you confirm that its SATA II?

• How to wear the Vista/Toshiba Satellite Pro A200 software after upgrade HARD drive

  Hello.

  Have ordered a Seagate Momentus 7200.02 200 GB SATA-300 7200 RPM 16 MB 2.5 "for my Satellite Pro A200GE - 26. Toshiba slow disk with this laptop ships is simply not fast enough so it is replaced.

  My question is this: can I use the recovery disc of the DVD came with my laptop to reinstall Vista and all the Toshiba drivers on this new album?

  If this is not the case-how can I do?

  If I can do it - could you give me a checklist of things to do?
  Are several factors I need to get used to exist on the recovery disk?

  I ask this because I know how to do this on a PC with the Original OS disc, but I was horrified when my laptop has been delivered and no original OS disk - I think it's very bad for any help would be accepted with gratitude.

  Thank you in advance,

  Kenny.

  Hello

  You should not worry about the whole procedure, just install the HARD drive, put the recovery CD in your CD/DVD drive, press F12 and start with your CD drive or just press 'C' (which automatically inserted CD, boots).

  The recovery is not limited to a specific HARD disk, it automatically adjusts the size of the partition and install EVERTHING on your disk as a preinstalled OS shipped directly from the factory. Don t you need some additional drivers or software, the only thing you need to do is to copy your personal data on the system drive and customize your windows.

  It is the intention of recovery media: put it in and it does everything by itself.

  That's all. :)

  See you soon

• WLAN on Satellite Pro L770-12R after upgrade to Windows 10 has lost

  OK, first of all, I must admit that I know very little about computers so be gentle!

  I have some cleaning on my laptop and uninstall programs I didn't need. All of a sudden my WiFi stopped working and there is no wireless option when I try to connect to the internet, it shows just connect using a cable. I guess that means that I accidentally uninstalled some software required to connect to the wireless internet.

  How can I get it back? Thank you!

  Natalie

  Hi Natalie

  Can you please tell us which model of laptop and operating system do you use?

  Please open the Device Manager and check the first WLAN card status. Wireless network card must be listed and properly activated it. As an example, I send you a copy of my laptop screen.

  

• Satellite Pro C850-1EQ - 8 tiles Windows does not work

  Hello

  I'm desperate for help try to solve this problem with my laptop. When I got my laptop (at Christmas) the majority of the tiles on the home screen windows 8 worked, however after a week or two they have gradually stopped working, which is very frustrating.

  When I click on a tile, it opens on the screen but the wheel continues to turn and nothing loads. I spoke to Microsoft online, however, they said that the problem with Toshiba as the laptop was purchased with Windows 8 already integrated.

  Suggestions, they did involving anti-virus and updates did not work.
  The most frustrating part is the Windows tile store does not work so I can't try to updates or new downloads to see if they will not solve the problem.

  Of course, I can use my laptop without the tiles, but I'm upset that I paid extra for Windows 8 and chooses the best part of it not working!

  Any advice on what to do next would be great, thanks in advance.

  Guess what? Try to restore the system Windows 8 back to the factory settings.
  Here you will find documentation how to do this:

  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  I recommend using the option * reset your PC *.

  + This option "Reset your PC" is useful when a PC is changed hands, or when you want to get a completely fresh start on a PC, without previous files of the selected configuration. +
  + The delete all, then reinstall Windows option permanently removes your personal files and the PC applications and returns 8 Windows to its original state. That the State of origin is a clean install of Windows 8, nor the default configuration of OEM factory, depending on the medium used for the operation. +

• Satellite Pro C850 - 1EQ HDD recovery

  Hey guys, I ran into a problem with my hard drive (Hitachi Z5K500) and it seems that it will replace my laptop seems to constantly hang with random error messages. I bought the toshiba recovery media and tried to reset a PC with her and she always does the same thing when in use.

  I just wanted to ask a few things:

  1. once I have replace the hard drive (I bought the same exact model reader) can I use recovery on it support to set up as if it were to return to the factory settings?

  2 Windows 8 product key is not anywhere on the laptop box and I did receive an email from windows when I bought the laptop. Will it take this product key when you use the recovery on the new hard disk media and if yes, how can I find it?

  Thanks in advance for your help.

  MinZ

  Hello

  > 1. Once I replaced the hard drive (I bought the same exact model reader) can I use recovery on it support to set up as if it were to return to the factory settings?
  Yes, you must use the recovery disk and it s recommended to use this support to put the laptop back to factory settings.

  > 2. Product key of Windows 8 is not anywhere on the laptop box and I have not received an email from windows when I bought the laptop. Will it take this product key when you use the recovery on the new hard disk media and if yes, how can I find it?
  Windows system on the recovery media is already enabled and you do not have to put or insert the serial key to activate the system.

• Satellite Pro C850 - 1 M - update to Win 8.1 fails - error 0xC1900101 - 0 x 30018

  Hi all

  bought a new satellite Pro C850-1MX (PSCBZE 00M009GR) in December 2013. System works virtually unchanged to the State of delivery. Yet installed OpenOffice and Firefox, AdobeReader in most actual versions. And a updated driver for AMD GPUS to the latest version. No other changes made.

  Now I tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  Searched internet solutions: Toshiba ISC
  -updated all the components Toshiba via TOSHIBA Service Station--> fact
  -(Lien: [http://www.toshiba.de/innovation/generic/windows8_1-upgrade-stepbystep/]): uninstall some components: esp. LAN/WLAN-driver.

  Hmmm... If I do I can't access to Windows App-Store to re-run the upgrade because I have no connection to the network. Stupid...

  -Why I'm updating a nearly unchanged system due to some driver-inflicted where I has not changed anything of the delivery status of can´t?

  Please indicate any tip/solution. Thank you!
  Mark

  > Now tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  This error message appears because of some incompatible drivers and tools that are already pre-installed on Windows 8.

  This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014
  Look in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

  Check that drivers must be uninstalled in Appendix a.
  [How update of Windows 8 for Windows 8.1 | http://support.toshiba.com/sscontent?contentId=4003162]

  + What is important to remove the internet connection. +
  + Only use to download 8.1 and then disconnect (also the Lan cable) +.
  + After Win start 8.1 for the first time do not connect to the internet. +

  + On another pc download first for 8.1 audio, realtek wlan and bluetooth drivers and driver display. +
  + Install and reboot after that when system is stable, you can connect to the internet and download the updates of windows. +

  PS: this thread should be closed to avoid the misunderstandings and because the other thread already exists

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Satellite Pro C850-15N - some keys do not work.

  Am 90 per cent positive that this is not the fault of a broken keyboard keys do seem loose and work very well for a while.*
  --
  Basically, the other day I noticed the keys 3 and 5 were not work next to the f3 key (meaning I now have to go into the settings of brightness, whenever I want to increase it). I thought "I'll just reboot and see if that fixes anything" and he did... temporarily. I have to restart every time that I've lost the ability to use these keys, but now it does nothing.

  There is no update which should install Windows (updated 8.1 update 1 recently).
  There is no update options the keyboard driver (the box is grayed out).
  There is nothing stuck, they seem not damaged or less they touch.

  The features of my laptop;
  Name of the operating system Microsoft Windows 8.1
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of HOUSE system
  The TOSHIBA system manufacturer
  System model SATELLITE PRO C850-15N
  System Type x 64-based PC
  SKU PSKC9E-01J00JEN system
  Processor Intel Core i3 - 2328M CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde Corp. 1.60, 27/06/2012
  SMBIOS Version 2.7
  Embedded Controller Version 1.70
  BIOS Legacy Mode
  ---
  * I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - seems to me later for my model, such as the toshiba site list any keyboard updates.*
  ---
  I also grabbed the driver files if this will be of no use at all:
  PS/2 standard keyboard
  C:\Windows\system32\DRIVERS\i8042prt.sys
  C:\Windows\system32\DRIVERS\kbdclass.sys

  ---
  Can anyone give me any help? I'll buy a USB keyboard in a few weeks anyway, but for now, it's really annoying not being able to use these keyboard shortcuts: P

  > I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - I seem to have the most recent for my model, as from Toshiba Web site does not list the keyboard updates.

  It seems that this opinion is not from Microsoft staff, but some users of the forum.
  You should know that the drivers of keyboard (developed by Microsoft) are still part of the Windows System. Any Windows OS you use, the keyboard driver would be always installed as part of the OS. This means that the drivers of special keyboard DON T exist but system uses own driver...

  You can check the functionality of the keyboard in USB external keyboard.
  If external keyboard works properly, the internal keyboard is malfunctioning and must be replaced.

  If the external keyboard does not work properly too, then I recommend you to recover the laptop using Toshiba HDD recovery. Otherwise, there could be question of motherboard (keyboard controller).

• Satellite Pro C850 - how to activate 'Numlock' on startup

  Hi all

  No one knows how you can activate the "Numlock" key to start the laptop.

  Concern: Satellite Pro C850 - 1LN

  I look in the BIOS (6.70) > advanced... but find nothing
  I am also looking Windows 8.1, but also without success.

  Any idea to help me?

  Thanks in advance.

  Marc

  Hi Marc

  As much as I know there is no certain special option to turn on the num lock and you can not define is as default to be always enabled. Extra keypad on the keyboard is designed for use with different applications such as Office Excel and allow you an entry comfortable numbers in some document.

  On my laptop (P500), I noticed that when I turn off laptop with active NumLock will be on next start so let is all the TIME.

• Satellite Pro C850 keyboard does not work properly and opens several programs

  My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing

  is there a permanent solution to this problem?

  This is not something to do with installed programs is not something to do with the browser settings.
  restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!

  > is there a permanent solution to this problem?

  The question is what causes this problem? Is it related hardware or software related issue?

  Why n t connect a USB keyboard just to check if the same would happen?

  In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.

• Satellite Pro C850 - peripheral Audio not installed

  Satellite Pro C850, suddenly had res cross on its icon and no noise. Says the audio device not installed. Have tried deactivation/activation and also updated, no joy.

  Can anyone help?

  Fixed it, to download a driver.

• Windows 8 to 8.1 upgrade is not possible on Satellite Pro C850-1MX

  Hello Forum users,.

  Sorry for my bad English. I'll try my best ;-)

  I'm trying to upgrade Windows 8.0 8.1 on a Satellite Pro C850-1MX.

  Before that I removed:
  -Realtek Audio Driver
  -Realtek WLAN Driver
  -Bluetooth filter Driverpackage
  -Toshiba Health Monitor

  I also checked the notebook with the update of the Windows Advisor 8 / attend.

  Whenever I try the update is installed, the computer restarts and says while the previous version is restored because the update failed (0xC1900101 & 0 x 30018).

  I tried to restore the laptop to factory (using the recovery partition), deleted the drivers, tried again. Same failure.

  Where is the problem?
  Someone at - it an idea?
  I Don t know what to do then.

  Thank you!!

  Thiemo

  Hello

  Upgrade the win 8 to 8.1 win, to follow some step by step instructions:
  This can be found here: [how update of Windows 8 for Windows 8.1 | http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/]

  Note: after installing Windows 8.1 drivers Toshiba and tools needs to be updated in the correct order.
  The Win 8.1 driver installation instruction can be found on the page of the Toshiba UE driver you laptop model section.